- 2K Ceramic Chassis Black Gloss Qt
2K Ceramic Chassis Black Gloss Qt
Item #50429ZP Brand: Eastwood
About 2K Ceramic Chassis Black Gloss Qt
Now there's a catalyzed urethane form of our popular Chassis Black with a difference. This is our most durable, chemical resistant, and easiest to spray, chassis Black yet! And since it's formulated with ceramic, it offers even better abrasion resistance! Easy 4:1 mix with the 21854Z Activator 8 oz. & spray with a 1.3 or larger nozzle spraygun. Covers about 50 sq. ft. in 2 coats. Withstands peaks up to 300 degrees F. For greatest durability apply over our 50242ZP Epoxy Primer. For professional use only. Contains isocynates. Proper respiratory protection Must Be Used.
One catalyzed quart of Eastwood Ceramic Chassis Black covers about 50 square feet in 2 coats.
The 21854Z Activator 8 oz. is sufficient to catalyze one quart of Eastwood Ceramic Chassis Black.
Can Eastwood Ceramic Chassis Black be applied directly over other finishes? Generally Eastwood Ceramic Chassis Black can be applied over most thoroughly cured (cannot be indented with a thumbnail) finishes. Scuff first with 320 -600 grit and test a small area before coating the entire area. If lifting occurs, remove the lifting paint, sand the surrounding area, and seal the surface by priming first with 50242ZP Epoxy Primer mixed with 50243ZP Epoxy Primer Catalyst. NOTE: Eastwood Epoxy Primer can be reduced up to 20% with 50104ZP Universal Zero VOC Urethane Reducer Qt. to use strictly as a sealer.
This product is designed for use by trained professionals. Read & understand all warnings and directions before use. Do Not Use Without Sufficient Ventilation. Users must wear an appropriate, properly fitted NIOSH-approved activated charcoal cartridge respirator if a forced fresh-air system is not available. Do not use this product, or be exposed to spray mist/vapors if you have respiratory problems, are pregnant or nursing. Keep Out Of Reach Of Children And Pets. This System comprises multiple components. Once mixed, this system will have the hazards of all components.
Made in the USA.
Eastwood Ceramic Chassis Black is easily applied with your HVLP gun with a 1.3mm or larger nozzle. Provides complete hiding in 2 coats. Allow 10 minutes between coats. Refer to product label for more complete application directions and safety information. Can be applied directly over our 50242ZP Epoxy Primer after 60 minutes to 5 days without scuffing.
Questions & Answers
Customers also viewed:
"Paint Over Rust" chassis coat in semi-gloss black
Starting at: $23.99
Durability and precision of a 2-component coating, without the paint gun
Starting at: $24.99
Our most durable, chemical-resistant, easiest-to-spray, chassis black
Starting at: $61.98