Item # 31112 BRAND: Eastwood

4 1/2in Cleaning / Stripping Disc System

3M™ Scotch-Brite™ discs get down
to bare metal fast to clean and strip
3M™ Scotch-Brite™ discs get down
to bare metal fast to clean and strip
4 1/2in Cleaning / Stripping Disc System is rated 4.8 out of 5 by 5.
  • y_2021, m_11, d_30, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_31112, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 37.51ms
  • REVIEWS, PRODUCT
Reg. $41.99 Sale $39.98 Save $2.01
Out Of Stock. Due back January 30
Save for Later
3M™ Scotch-Brite™ discs get down
to bare metal fast to clean and strip
  • 90-Day Returns
  • Technical Support
4 1/2in Cleaning / Stripping Disc System

Description

3M™ Scotch-Brite™ Cleaning and Stripping Discs get down to bare metal fast

  • 4-1/2"-dia. discs for smaller jobs
  • Cleaning disc produces an 80-grit finish
  • Stripping discs leave a 320-grit finish
  • Hook-and-loop backing

Use your angle grinder with this 7-piece cleaning and stripping disc set from 3M™ to remove rust and paint residue from bare metal without generating excessive heat.

Contents

(1) 31073 Cushioned Backing Pad for a 5/8" x 11 shaft
(1) 31094 Cleaning Disc
(5) 31086A Stripping Discs

Accessories

31086A Additional Stripping Disc
31094 Additional Cleaning Disc

Application Tips

4-1/2"-Dia. Discs For Smaller Jobs

Safety Information

Always follow all instructions and warnings and wear proper eye, ear, skin and respiratory protection.

Customer Reviews

Rated 5 out of 5 by from This product works I'm restoring my Pinto and seen the video of the cleaning /stripping system so I bought the kit. The stripper gets to bear metal fast on the painted surfaces and leaves a good surface to work with. The stripper disk does remove old bondo but it wears fast doing so. If you buy the kit get extra stripper disks at that time so you have them when they wear out. Now I know.
Date published: 2015-05-11
Rated 5 out of 5 by from 4.5" cleaning disc system is a winner I'm stripping all the old BC/CC finish of my 1979 TA. Starting with the hood, I needed something that would work with my Dewalt 7" variable speed polisher/sander. The 4.5" cleaning/stripping disc system was purchased. The rough cleaning disc (gray) cuts very well and the grit was similar to 80 grit sandpaper. The hook and loop system is convenient. I found 1400 rpm to be the best with the cleaning disc. I recommend this product, and plan to use it on other parts of the body where cutting and tool control is critical.
Date published: 2015-04-01
Rated 5 out of 5 by from Great Product. This product is great took paint off fast and efficiently. In a matter of 45 minutes stripped two quarter panels the roof and part of the fenders with one disc. i would highly recommend this product.
Date published: 2015-03-23
  • y_2021, m_11, d_30, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_31112, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 18.2ms
  • REVIEWS, PRODUCT

Questions & Answers

When I put the accessory on, it vibrates my hand so hard I can barely use it. Am I doing something wrong? 

Asked by: Dezirayk
When you put the stripping disc on, make sure it is perfectly centered on the backing pad. If that is not centered, it will cause vibration. If that still vibrates, try the backing pad without a disc to see if that vibrates when turned on and let us know.
Answered by: NickC
Date published: 2020-05-02

Can these be used on a da? I do not own a grinder and am painting a small car hood.

Asked by: astropuppy
This item will not work with your DA. Might we suggest using 80 grit sandpaper on your DA to remove the paint.
Answered by: Bob G
Date published: 2020-03-20

How many will it take to strip an entire car? 1968 Cadillac coupe. 

Asked by: Jamesd1996
That will depend on what kind of paint is on the car. You 68 Caddy is a very large car. You will use a lot of these stripping discs. Some where around 8 to 10 discs. A better way to strip a car of this size would be to use our Contour SCT Item #21145 with drum Item #21171.
Answered by: Bob G
Date published: 2018-11-06

Will this work for cleaning the old head gasket and prepare the surface on a steel engine block?

Asked by: Riker1
You would want to use the red one for gasket prep.
Answered by: S Church
Date published: 2020-03-20

Will these work to get rust off of a car frame and prep for painting or would you recommend the bristle discs?? Thanks, Chris

Asked by: HVYWT73
Depending on the rust that is on the frame. if it is surface rust yes this kit will work for you. If it is flaking rust I would recommend the bristle disks for that application.
Answered by: Ed O 88
Date published: 2020-03-20
  • y_2021, m_11, d_30, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_31112, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 60.93ms
  • QUESTIONS, PRODUCT
We found other products you might like!
4 1/2in Cleaning / Stripping Disc System
Reg. $41.99 Sale $39.98 Save $2.01
Out Of Stock. Due back January 30