- Eastwood 4 in Metal Bender
What would the maximum thickness of 3 inch flat bar that this will bend ?
Do you know the dimensions of the base of this tool? Thanks.
Would you please tell me the shipping weight of the package?
can this make cylinders
when will this be back in stock?
When will this be back in stock?
Lets say I need to make two 90 degree bends in a small piece of sheet metal, to form a a "U" channel, with right angles at the bottom. What is the smallest distance between the outside edges I could hope to make?
I need to bend an 8" long x 1.25" wide x 3/16" flat bar with a 1" radius bend at the 4" mark. My question is can I tack on a piece with the radius I need on both dies. I am thinking of a 1" pipe cut in half tacked to both dies front and back. Thanks
Eastwood 4 in Metal Bender
Eastwood 4 in Metal Bender
Item #20521 Brand: Eastwood
The Eastwood 4 inch Metal Bender is a compact but strong metal bender that is capable of completing precise bends up to 3/16th inch thick steel at full width and 90 degrees.
The Eastwood 4 Inch Metal Bender Features:
- Powerful 2-1/2 tons of pressing force
- Create up to 90 degree bends
- Bends mild steel and aluminum up to 3/8" thick and 4" wide
Simply mount the bend on a work surface and start bending your desired material. No need for a full size hydraulic press that takes up a large amount of space in your shop. Save space and time when bending suspension brackets or seat mounts for your project.
The Eastwood 4” Metal Bender is a high quality, industrial style tool capable of generating a powerful 2-1/2 tons of pressing force to create 90° or lesser repeatable bends in mild steel and aluminum up to 4” wide.
(1) Metal Bending Brake Unit
(1) Male Die
(1) Acorn Nut
(1) Stop Rod
(1) Stop Rod Lock Nut
(1) Workpiece Stop Gauge
(1) Stop Clamping Screw
(1) Stop Clamping Wingnut
• Maximum Jaw Travel: 2-1/2”
• Minimum Bend Radius: 1/4”
NOTE: For mild steel only. High carbon steel and stainless steel allowable thickness will be less while aluminum thickness will be higher.
• Maximum Bend Angle: 90°
• Average Maximum Expected Material Bending Capability.
NOTE: Material thicknesses shown are for mild steel only. High carbon steel and stainless steel thickness will be less while aluminum thickness will be higher.
- 3/4” wide, max. = 3/8” thick
- 2” wide, max. = 1/4” thick
- 4” wide, max. = 3/16” thick
This tool has leveraged rotating components that generate greatly amplified crushing and bending forces which can quickly cause severe injury! Keep fingers and hands away from moving parts when operating.
Handling sharp metal can cause serious cuts. Wear thick, well fitting work gloves to prevent cuts from handling sharp metal.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov