Item # 1052091 BRAND: Ingersoll Rand

Ingersoll Rand Air Hammer W/Chisel 5Pc Kit - Stand

Pounds away at up to 3500 blows per minute...includes 5 assorted chisels
Pounds away at up to 3500 blows per minute...includes 5 assorted chisels
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 15.76ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$99.99
Loading...
Loading...
Save for Later
Pounds away at up to 3500 blows per minute...includes 5 assorted chisels
  • 90-Day Returns
  • Technical Support
Ingersoll Rand Air Hammer W/Chisel 5Pc Kit - Stand

Description

Ingersoll-Rand Standard-Duty Air Hammer Kit pounds away at up to 3500 blows per minute...includes 5 assorted chisels - IR116K

Economical pneumatic hammer from Ingersoll-Rand gives you fast cutting action, especially for standard-duty work on exhaust systems, panel cutting, and general repair work. Alloyed steel barrel and heat-treated piston for longer life. Built-in power regulator and trigger control. ACCESSORIES INCLUDED in this kit: punch chisel, edging tool, tail pipe cutter, 3/4"-wide-blade straight chisel, cutting chisel.

Specifications

Blows Per Minute: 3500; Shank Opening: Round; Stroke Length: 2.63"; Average Air Consumption: 3 CFM; Air Consumption At Load: 15 CFM; Air Inlet: 1/4" NPTF; Min. Hose Size: 3/8"; Chisel Shank Dia.: 0.401".

Warranty

90 day manufacturer's defect warranty.

Accessories

Punch chisel, edging tool, tail pipe cutter, 3/4"-wide-blade straight chisel, cutting chisel.

Safety Information

Always wear appropriate eye protection. Do not exceed recommended PSI. Hold tool securely (2-handed operation is recommended). Keep loose clothing, jewelry and long hair away from rotating components. Use only with specific "impact-rated" sockets, adapters and accessories for Impact wrench. Always make sure the work piece is securely clamped or anchored. Always disconnect tool from air supply when changing sockets, blades, bits or other accessories. 

Customer Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 14.23ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

Questions & Answers

what is the plastic thumb screw cap for and ho do you oil it?

Asked by: clayton
There is a power regulator adjustment on the bottom. You would lubricate it through the air inlet.
Answered by: John S
Date published: 2020-05-28

What length are the chisels that come with this item

Asked by: needtoknownow
the length of the chisels range from 5 3/4" to 6 1/4"
Answered by: Bob G
Date published: 2020-03-11

How many cfms and psi does it take to run tool. Thanks

Asked by: jonester
Blows Per Minute: 3500; Shank Opening: Round; Stroke Length: 2.63"; Average Air Consumption: 3 CFM; Air Consumption At Load: 15 CFM; Air Inlet: 1/4" NPTF; Min. Hose Size: 3/8"; Chisel Shank Dia.: 0.401".
Answered by: SeanA
Date published: 2020-07-01
  • y_2021, m_9, d_17, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_1052091, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 24.27ms
  • QUESTIONS, PRODUCT
Ingersoll Rand Air Hammer W/Chisel 5Pc Kit - Stand
$99.99
In Stock