About Ingersoll Rand Air Pneumatic Hammer 3500Bpm .401 Shank
Ingersoll-Rand Standard-Duty Air Hammer Kit pounds away at up to 3500 blows per minute - IR116 Economical pneumatic hammer from Ingersoll-Rand gives you fast cutting action, especially for medium-duty work on exhaust systems,panel cutting, and general repair work. Alloyed steel barrel and heat-treated piston for longer life. Built-in power regulator and trigger control.SPECIFICATIONS: Blows Per Minute: 3500; Shank Opening: Round; Stroke Length:2.63"; Average Air Consumption: 3 CFM; Air Consumption At Load: 15 CFM; AirInlet: 1/4" NPTF; Min. Hose Size: 3/8"; Chisel Shank Dia.: 0.401".
Always wear appropriate eye protection. Do not exceed recommended PSI. Hold tool securely (2-handed operation is recommended). Keep loose clothing, jewelry and long hair away from rotating components. Use only with specific "impact-rated" sockets, adapters and accessories for Impact wrench. Always make sure the work piece is securely clamped or anchored. Always disconnect tool from air supply when changing sockets, blades, bits or other accessories.
90 day manufacturer's defect warranty.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov