
Details
The ATK HP81 Ford 408 Stroker Engine is a highly reliable mill that easily meets your power demands. It uses aluminum cylinder heads for improved performance and the forged components offer high endurance and wear. This crate engine has installed and sealed freeze plugs and oil galley plugs to prevent the risk of leaks.
Engine Specifications:
- Horsepower: 480
- Torque: 500 lb/ft
- Block: Seasoned OE 351W Roller Block
- Bore/Stroke: 4.040 x 4.000
- Displacement: 408 C.I.D.
- Crankshaft: Scat 4340 Forged 4.000" Stroke 1 Piece Internally Balanced
- Connecting Rods: Scat 4340 Forged H Beam 6.200" ARP 8740 Bolts
- Pistons: Forged Dish W Valve Reliefs
- Piston Rings: Moly Rings
- Compression Ratio: 10.0:1 Compression
- Camshaft: Hydraulic Roller
- Camshaft Specifications: 235/238 @050 .573in/.582ex 112LSA
- Camshaft Bearings: Installed & Clocked to OEM Position
- Cylinder Heads: Dart Pro 1 Aluminum 58cc/195cc 2.02/1.60
- Freeze Plugs: Brass Installed & Sealed
- Rocker Arms: Billet Aluminum 1.6 Full Roller
- Oil Galley Plugs: Installed & Sealed
- Oil Pan: Moroso 7qt. Front Sump
- Weight:350
ATK specializes in muscle. With the highest quality internal parts and Dyno Proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty.
Contents
ATK High Performance Ford 408 Stroker 480 HP Street/Strip Stage 1 Long Block Crate Engines
Specifications
Engine Information:
• Oil: 10W30
• Oil Filter: Wix or K&N Recommended Per Your Application
• Fuel Delivery: Quick Fuel Carburetor 780cfm #HR-780-VS
• Intake Manifold: Edelbrock Performer RPM Air-Gap Dual Plane #7581
• Spark Plugs: Autolite #3923
• Spark Plug Gap: .035"
• Harmonic Balancer/Damper: Professional Products Internally Balanced Weight Must Be Removed #80006
• Flex Plate / Flywheel: Internally Balanced 164 Tooth
• Timing: 34-36 Degrees Total
• Water Pump: Standard Rotation Right Hand Inlet
• Firing Order: 1 3 7 2 6 5 4 8
• Exhuast: 1 3/4 Headers
• Fuel Pump: Holley 110GPH Mechanical #12-289-11
• Fuel: 91+ Octane
• Ignition: Pro Billet with Melonized gear
• Automatic Transmission Stall Converter: 2500-3200
Accessories
Recommended Components:
• Balancer: Internal
• Carburetor: Quick Fuel 780cfm #793-HR-780-VS (vacuum secondary's, electric choke)
• Distributor: Pro Billet MSD #121-83541 (steel gear)
• Intake Manifold: Edelbrock Performer RPM Air Gap dual plane #350-7581
• Flexplate/Flywheel: Internal
• Fuel Pump: Holley Mechanical 110gph #510-12-289-11
• Spark Plugs: Autolite #417-3923
• Spark Plug Wires: 8mm
• Water Pump: RH inlet - standard rotation
Disclaimer: The parts listed are ATK’s recommendations of parts to be used to obtain our power figures listed. Power figures can vary based on parts used by the end user. It is the customer’s responsibility to verify components will work for their application. Some modifications to the vehicle may be required using these and or other aftermarket parts.
Shipping Instructions
Shipping is free and lift gate will be provided.
Eastwood Offers Free Lifetime Technical Support
Click here for product SDS information
Attention California Residents - Proposition 65
