Item # 31543 BRAND: BendPak

BendPak 10000lb Capacity 2 Post Lift XPR‐10S‐LP Gray

2 Post Clear Floor with Low Pro Arms XPR-10S-LP Gray
2 Post Clear Floor with Low Pro Arms XPR-10S-LP Gray
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 80.95ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$5,115.00
Loading...
Loading...
Save for Later
2 Post Clear Floor with Low Pro Arms XPR-10S-LP Gray
  • 90-Day Returns
  • Technical Support
BendPak 10000lb Capacity 2 Post Lift XPR‐10S‐LP Gray

Description

The safe and rugged XPR‐10S‐LP two‐post lift features our exclusive Low‐Pro™ arms that accommodate lowered sports cars and those vehicles with exclusive lift points located on the extreme outer edges of the chassis. A telescoping overhead structure provides the convenience of wide or narrow installation wrapped up into one configurable package. This unique configurable design allows you to choose the best setting for your specific space or vehicle lifting requirements.

  • 10,000-lb. lifting capacity
  • Telescoping Low-Pro™ arms accommodate lowered sports cars and those vehicles with lift points located on outer edges of the chassis
  • Expandable top beam accommodates wide or narrow configuration
  • Double-telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Single-piece columns
  • Dual hydraulic direct-drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Single-point safety release
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4-piece 63 mm stackable adapter set comes standard
  • ALI certified

The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership. All BendPak's XPR two-post models feature dual "direct-drive" low-pressure cylinders, maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and triple-telescoping arm configuration for increase arm positioning versatility.

The XPR-10S-LP features double-telescoping screw pads with gouge and tear-resistant polyurethane pads to help increase workpla

Delivery: Will be delivered truck and will require a fork lift to unload. You must have a fork lift to unload from truck. 

Warranty

5 Years Structure, 2 years Power Unit/Hydraulics, 1 Year Parts and Labor

Contents

One 2 Post Lift

Instructions

<P align=left><A href="https://www.eastwood.com/images/pdf/31543_inst.pdf" target=_blank><I><B>Click here for product specifications</B></I></A></P>

Customer Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 48.33ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

Questions & Answers

How does this compare to xpr 10a? Is it certified?&nbsp;

Asked by: Wilbur
Due to the complexity of your question it is recommended that you contact Bendpac at 1-800-253-2363 for the specifics pertaining to your question.
Answered by: vince
Date published: 2021-05-07

can the voltage be changed to 120 volts a.c. single phase

Asked by: jaybird
If you have not already purchased your BendPak lift you can order direct from BendPak and ask them to send you 120 volt power unit instead of the standard 220 volt power unit. Hope this helps.
Answered by: Carl
Date published: 2021-02-08

What is the deminsion f=of hieght ?

Asked by: Rocket
The overall height of this lift is 12ft tall.
Answered by: ZachC
Date published: 2019-11-06

How high should ceiling be to install inside a garage?

Asked by: Chevrolet283
Total height of this item is: 145&quot; / 3,683 mm
Answered by: Kelly H
Date published: 2021-01-31

where are these lifts made at

Asked by: cheetah
The lifts are manufactured in China.
Answered by: SeanW
Date published: 2021-02-27

Is there a BendPak auto lift, that IS designed / rated for outdoor use? It is common to see service facilities across South Florida. I'm considering this type lift VS a low rise lift with custom covers to protect from weather, when not in use.

Asked by: Pushbroom Paulie
While there may be unfortunately we only offer the indoor versions and don't know their full catalog.
Answered by: Scott C
Date published: 2018-08-22

How do I order the 24&rdquo; top extension for the lift and how much does it cost&nbsp;

Asked by: Johnnie
Unfortunately this isn't an accessory we sell from Bendpak and will not have any pricing information.
Answered by: Scott C
Date published: 2018-05-07

How heavy is the unit so I know if I have a forklift big enough to handle the unload&nbsp;

Asked by: Johnnie
This ships on one skit which weighs 1780 LBS. Bendpack recommends a forklift with long tines as you'll be lifting from one end.
Answered by: Scott C
Date published: 2020-07-30
  • y_2021, m_9, d_16, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_31543, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 70.41ms
  • QUESTIONS, PRODUCT
BendPak 10000lb Capacity 2 Post Lift XPR‐10S‐LP Gray
$5,115.00
In Stock