BendPak XPR-10S-168-LP - Clearfloor - Low Profile Arms - Tall Lift - 10000 lb. Capacity 5175400
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • 90 Day Returns
- • Lifetime Tech Support
Product Overview:
Description
Two-Post Lift Offers More Power, More Options
The XPR-10S two-post lift offers exceptional direct-drive lifting performance. This industrial-strength car lift guarantees cutting-edge technology, top of the line materials, a design that’s ahead of its time and a 10,000-lb. lifting capacity. All height/width variations fit in shops with ceilings higher than 12’, and none of them will crowd your floor while you work beneath a vehicle. Every XPR-10S two-post lift features our telescoping screw pad assembly kit.
Why choose a symmetric car lift
Our XPR-10S symmetric two-post lift features an adjustable top beam to accommodate wide or narrow installation setups. This unique configurable design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership.
Direct-Drive two-post car lift technology
The XPR-10 two-post lift features low-pressure HVLP direct-drive cylinders, eliminating the need for lifting chains or screw mechanisms most commonly found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and fewer maintenance costs throughout the life of your lift. High volume and low pressure equates to less workload placed on the entire hydraulic system. Direct-Drive technology is preferred on commercial-grade two-post car lifts, as it has it has fewer moving parts than a chain-overroller cylinder configuration. Pressurized hydraulic fluid flows from the power unit to the hollow cylinder rods, entering the cylinder body and filling its internal cavity. The pressure of the hydraulic fluid extends the piston rod downward, raising the cylinder body and lift carriages.
Features:
- Expandable top beam for wide or narrow drive-thru
- Double-telescoping screw pads offer increased versatility
- Padded overhead safety shutoff bar
- Telescoping arm design for more versatile arm positioning
- Single-point safety release
- Drop-end arms provide a lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53” tall carriage for superior strength
- Electric / hydraulic power system
- Large, 17” x 19” A36 steel base plate
- Self-lubricating dura-glide UHMW polyethylene bearings
- Safety locks in each column spaced every 3”
- Automatic arm restraints
- Heavy-duty 1/2” aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- 4-piece 63 mm stackable adapter set comes standard
- Triple-telescoping arm design
- Versatile drop-in contact pads with stackable adapters
- ETL Approved
Warranty
Specifications
Capacity | |
Lifting Capacity* | 10,000 lbs. (4,536 kg) |
*Max Capacity / Front Axle | 5,000 lbs. (2,268 kg) |
*Max Capacity / Rear Axle | 5,000 lbs. (2,268 kg) |
Rise | |
A - Rise: | 69" (1,753 mm) |
B - Rise + Pad Only: | 73.75" (1,873 mm) |
C - Rise + Pad + 63 mm Adapter: | 78.5" (1,991 mm) |
D - Min. Height + Pad: | 4.75" (120 mm) |
Time to Full Rise: | 45 seconds |
Outside Dimensions | |
E - Height Overall: | 168.75" (4,284 mm) |
F - Width Overall: | 132" (3,353 mm) or 145" (3,683 mm) |
G - Outside Columns: | 126.75" (3,219 mm) or 139.75" (3,550 mm) |
Inside Dimensions | |
H - Inside Columns: | 105.5" (2,680 mm) or 118.5" (3,010 mm) |
I - Drive-Thru Clearance: | 93" (2,362 mm) or 106" (2,692 mm) |
J - Floor To Overhead Switch: | 164.75" (4,182 mm) |
Arms & Pads | |
K - Front Arm Reach: (MIN) | 25.5" (646 mm) |
K - Front Arm Reach: (MAX) | 49.5" (1,255 mm) |
L - Rear Arm Reach: (MIN) | 32.25" (820 mm) |
L - Rear Arm Reach: (MAX) | 52.5" (1,333 mm) |
Screw Pad Adjustment: | 2" (51 mm) |
Max Load Per Arm | 2,500 lbs. (1,134 kg) |
Power Unit | |
Motor: | 220 VAC / 60 Hz / 1 Ph |
Noise: | 45 dB |
Shipping & Handling
- Delivery Time: This item ships directly from the manufacturer - Please allow 2-3 weeks for delivery time
- Residential Delivery: This item may only be shipped to a business address and a forklift must be available to unload.
- Delivery: Will be delivered truck and will require a forklift to unload. You must have a forklift to unload from truck.
https://www.bendpak.com/BendPak-Products-Flatbed-Exclusive.pdf
https://www.bendpak.com/BendPak-Delivery-Information-Form.pdf