Item # 21109 BRAND: Eastwood

Eastwood Blast Out of a Bucket Kit

Blast Out of a Bucket Kit
Blast Out of a Bucket Kit
Eastwood Blast Out of a Bucket Kit is rated 3.6 out of 5 by 16.
  • y_2021, m_11, d_27, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.20
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_16
  • loc_en_US, sid_21109, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 88.87ms
  • REVIEWS, PRODUCT
$53.99
Loading...
Loading...
Save for Later
Blast Out of a Bucket Kit
  • 90-Day Returns
  • Technical Support
Eastwood Blast Out of a Bucket Kit

Description

Eastwood Blast Out of a Bucket is the solution for those fast blasting jobs.

Includes:

  • High Performance Blast Gun Assembly
  • Draws 14in Hg of vacuum @ 80 PSI.
  • 5’ Suction Hose
  • Pick Up Tube & Clamps
  • 3 Replacement Nozzles
  • 1 Replacement Jet

Requires at least 7 CFM @ 80 PSI of clean dry air.

Just connect it to your compressed air supply and drop the pick-up tube into a bucket, bag or box of media, suit up in your protective gear and go blasting. Provides a method to strip away old paint and coatings, body fillers, accumulated dirt and minor to moderate rust leaving a clean, bare metal surface ready for local damage repair or painting.

Abrasive media is not included and sold separately.

Abrasive blasting with a professional gun at a price that anyone can afford. No need for a large blast cabinet that your project might not fit in or a pressure blaster that takes up a large space in your garage. This kit enables you to fill a spare bucket with media connect to compressed air and blast away rust and grime on your project anywhere.

Warranty

90 Day Warranty

Contents

  • (1) Blast Gun Assembly (2.5mm I.D. Air Jet and 4mm Nozzle installed)
  • (1) Double Pick Up Tube
  • (1) 5' [1.5m] x 1/2" [12.7mm] I.D. Reinforced Suction Hose
  • (3) 0.16" [4mm I.D.] Ceramic Nozzles (requires 7 CFM at 90 PSI)
  • (1) 0.10" [2.5mm I.D.] Replacement Air Jet (requires 7 CFM at 90 PSI)
  • (1) 1/4" MNPT Quick Disconnect Air Fitting

Accessories

 

Application Tips

 

Safety Information

WARNING: Blasting emits abrasive under pressure. Adequate respiratory eye and body protection must be worn during use. Inhalation of silica based media particles have been known to cause cancer and other deadly diseases, and must be avoided. Wear NIOSH approved respiratory protection while operating this equipment.

Click here to see safety products

Customer Reviews

Rated 5 out of 5 by from Works great, great value Only thing to be aware of is pressure. It seems to work best around 50 psi or half trigger on my set up. So a cheap pressure regulator may help if you're going to use it for a good length of time.
Date published: 2018-12-08
Rated 5 out of 5 by from Worked great. I had a similar product that was not of the same quality and that didn't work well. I thought my compressor just wasn't up to the job. But the Eastwood product worked well. My compressor still isn't quite big enough to keep up, so I have to take breaks and let it catch up.
Date published: 2017-09-25
Rated 5 out of 5 by from Great Product! Great product that performs well! This has made preping faster & easier. I would highly recommend it.
Date published: 2017-09-05
Rated 5 out of 5 by from Works great! Originally, I was planning to buy a sandblaster with a tank but decided on this instead and I did not regret it. Had a little issue with assembly as the clamps are two different sizes...easily switched around, stuck it in a bucket of media and got to work immediately. Just make sure you are using a good compressor with good water filter with this. I had an issue with moisture and slightly turned one of the tips oblong shaped because it was clogging. Not the product's problem but mine.
Date published: 2017-09-02
Rated 5 out of 5 by from big things in small packages I wanted something that didn't take up a lot of space and this was it. It works well with a good dryer. Haven't had any problems with it. I recommend this blaster to any beginner and for someone who isn't doing big job's.
Date published: 2016-10-22
Rated 4 out of 5 by from Excellent BUT read posts about nozzle size I purchased this a few days ago to replace a blast gun in my sandblaster that I could no longer find nozzles for. As expected, the product is well built and a high quality item. I read the reviews prior to purchase and noticed one review about the small nozzles provided not working. This is indeed fact. I was curious, so I hooked up a vacuum gauge to the suction line prior to installing in my cabinet. There is near zero vacuum pull with the provided 4 mm nozzles. As the other reviewer suggested, I also purchased a replacement nozzle pack - item number 20068. This includes 4,5,6, and 7 mm nozzles. I then progressively installed each and measured the vacuum draw. The 5 mm nozzle does pull some vacuum, but it really starts to kick in with the 6 mm and 7 mm sizes. At 7 mm, I am drawing a full 15 mm HG - this is actually higher than advertised. For my test, I used a standard 3/8 ID air hose. My compressor is a Campbell Hausfeld 2 stage 5 HP unit w/ 80 gallon upright tank, so plenty of air. Bottom line, this setup is probably indicative of what many of us have. I did not have a larger air hose, so I could not do further testing. So, short story, I do recommend this product but be aware of the nozzle issue. I am a long time Eastwood customer because of their blazing fast shipping and high quality products. In this instance, it is a little disappointing that this appears to be a known issue that has not been addressed or investigated.
Date published: 2020-04-04
Rated 4 out of 5 by from Homemade Blast Cabinet... I bought this to replace a cheap Harbor Freight blast gun that worked marginal with glass bead and almost not at all with 60 grit sand. I made a blast cabinet years ago to fit my needs and space in my garage with a home-made gravity-fed hopper. Out of the box, this gun wouldn't pull sand or practically any vacuum on the feed hose at all. Luckily I bought tip part number 20068 at the same time so I could experiment with different sizes. After messing with my air pressure and all sorts of other ideas, I threw the biggest tip in and boy did that make a difference. I quickly went over a very rusted railroad spike with twice-used sand and the results were awesome for just a quick once-over. I haven't used glass bead in it yet, because I usually only use that with aluminum parts, and my current projects are mostly sheet steel and cast iron. I'm using an Ingersoll Rand compressor 13cfm @ 90 PSI with pressure switch set to turn on at 100 PSI and off at 130 PSI, 1/2" NPT water/air separator on the main tap, foot pedal is present so my hand doesn't get tired of holding the trigger, but took it out of the loop to troubleshoot and haven't plumbed it back in yet, 1/4" NPT ARO quick connect fittings with 3/8" hose, old shop-vac to create negative pressure in the cabinet. Cabinet has plumbing to recirculate media, but I find that the gravity-fed hopper works much better. To get the best flow I made a cup at the bottom below the 1/2" hole in the base of the hopper that creates a pyramid of media in the cup and then the hose pulls through a fitting at the side of the pyramid of media as it falls out of the hopper (drain plug in the bottom of the cup). This prevents rat-holing of media and allows the hose to suck a little bit of air too, increasing the velocity of the media to the gun. Honestly, my cabinet is awesome and fits my needs perfectly, but if Eastwood has a cabinet that works for you, it's not worth the time to make your own. Don't forget safety - I use a good cartridge style respirator, safety goggles, and hearing protection during blasting.
Date published: 2017-07-20
Rated 4 out of 5 by from well made This has the feel of a well made product. It has a fairly small blast area, so you would not want to tackle anything really big, but if you take your time it does a nice job. My 30 gallon, 6hp compressor with an air dryer kept up ok.
Date published: 2016-07-10
Rated 1 out of 5 by from Not Happy As of date the unit is non-functional, air is right, volume is right, it will not pick up the sand.
Date published: 2021-11-19
Rated 1 out of 5 by from Blast from bucket is overpriced junk! Blast from bucket does not work . It is not worth the money I paid,for less money i bought a good sandblaster at Harbor Freight. Now i can't return the bad product because your computer is not working. I am not happy at all with your product or service.
Date published: 2021-06-26
Rated 1 out of 5 by from cheap junk hose too short this thing did not work it had air blowing out of the tube where it should have vacume so I sent it back
Date published: 2020-08-06
Rated 1 out of 5 by from DO. NOT. BUY. Terrible product. Doesn’t work. Waste of money...which is disappointing considering how much of it I spend at Eastwood.
Date published: 2020-04-27
Rated 1 out of 5 by from Wanted to like this I really wanted to like this. Purchased to prep alloy wheels for powder coating. barely any vacuum is produced, and only a small amount of media comes out the nozel. Tried at higher pressures, and with high flow fittings, no improvement. Another reviewer suggested he had the same issue, but rated peoduct 4 stars because things were improved with a larger nozel (not included). Why isnt the proper size nozel included? Out of the box, an air fitting was already attached, instructions suggest you need to install it. Second hand product that someone else already returned?
Date published: 2018-08-12
  • y_2021, m_11, d_27, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.20
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_16
  • loc_en_US, sid_21109, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 55.97ms
  • REVIEWS, PRODUCT

Questions & Answers

I see 7CFM is the minimum required air flow. Is that realistic? How well will this do with a 60 gallon compressor rated at 11CFM? Will the compressor run continuously? I’ll be removing surface rust from car body panels.

Asked by: OldCarGuy
If your compressor has 11 cfm and a 60 Gallon tank, there will be no problem using this blast system. Just make sure that you do not exceed 80psi going into the blast gun.
Answered by: Bob G
Date published: 2020-03-24

Can I use glass bead 80 grit abrasive media?

Asked by: Mike D
This can use media that is 60 grit or finer so the 80 would work.
Answered by: SeanW
Date published: 2020-07-27

Will this unit blast a fine course walnut shell?

Asked by: Andrew
Walnut Shells are not recommended for this blaster. We recommend 60 Grit or finer Media.
Answered by: Bob G
Date published: 2019-03-03

Hello there - I was given a Harbor Freight blasting cabinet to work on my old TR4. I'm using 60 grit Alum Oxide but it doesn't seem to consistently feed into the gun at any PSI. Would you recommend the blast out of the bucket or something else ? Thanks

Asked by: Ingpark
This should have no problems with that grit of media as it can run 60 grit or finner media through it.
Answered by: Dakota W
Date published: 2020-03-24

Could this work to strip all that **** (rust) off old brake calipers? And which abrasive could work for that. Thanks.

Asked by: Kris
The Blast out of the bucket will certainly remove rust from your Calipers. You can use Aluminum Oxide or Glass Bead. Your Media mus be 60 grit or finer, and no more than 80 PSI going to the gun.
Answered by: Bob G
Date published: 2019-01-06

Recommended media for removing surface rust and paint from metal suspension and frame components?

Asked by: Gavin
Aluminum Oxide or Glass Beads would be great options for this application
Answered by: Kelly H
Date published: 2018-10-25

What do you mean when you say “dry” air. Does this mean it has been through a filter/regulator, or is a dessicant or refrigerant-type air dryer required?

Asked by: Tootall
When using any type of blasting equipment you will want to have an air dryer hooked up because moisture will clog the media up.
Answered by: SeanW
Date published: 2019-03-14

Can the media be reused ? If so how many times?

Asked by: scottgp
media certainly can be reused, there are too many variables to tell exactly how many times.
Answered by: SeanW
Date published: 2018-11-09

At 90 psi, this barely pulls media (glass bead) 120 psi, same problem. replaced fittings/couplers w/ Milton V high flow. No improvement. Reviewer had same issue and suggested a larger tip. Why does this include tips that are too small to work?

Asked by: Andy
The tips which are included are perfect for blasting glass bead. There are two things to look at with a kit such as this. 1. Make sure your compressor can put out a bare minimum of 7 CFM@ 90 PSI. 2. would be to ensure the pick up tube is only inserted about 3/4 of the way into the media to leave the air return open and clear of media. If these are not part of the issue feel free to email our Customer Service team at Orderhelp@Eastwood.com for more assistance.
Answered by: Scott C
Date published: 2019-04-05

Can you use walnut shell media through this?

Asked by: Tjsb03
You can not. This gun requires media 60 grit or finer.
Answered by: Kelly H
Date published: 2018-06-18

If I want to etch chrome plated wheels for primer/paint preparation, would this work?

Asked by: tomw
With the right media you could certainly blast wheels in preparation for paint. Aluminum oxide would be a great option for steel wheels.
Answered by: Scott C
Date published: 2018-05-15

Is this only for dry blasting or could I use it for wet blasting

Asked by: JRee
We have designed this kit for dry blasting only. We do have a liquid blasting kit for use with a pressure washer.
Answered by: Scott C
Date published: 2018-07-08

Why have such a short 5 ft hose? Seems like a 6 ft to 8 ft hose would be better for some jobs like my metal gate and fencing without having to put the bucket on a higher platform so can get to the top areas. I'd send photo but your not set up for it.

Asked by: Arthur DWB
We simply designed this to be an entry level media blasting kit allowing you to get into blasting without breaking the bank.
Answered by: Scott C
Date published: 2018-05-13

Can this be used with salt to clean pool tiles?

Asked by: Tony
While we have never tested with salt we have blasted media's which are 60 grit. If your salt is 60 grit of finer you should be fine.
Answered by: Scott C
Date published: 2018-03-30

Is there a way to attach some kind of tube or wand to it for hard to reach areas?

Asked by: Jkip
We do not have any attachments for extending any of our blasters.
Answered by: Scott C
Date published: 2017-12-06

Would 5.3 SCFM @90psi work with this?

Asked by: hankfan79
Since this unit requires 7 CFM it would not work well. You would wind up have a reduced output of media.
Answered by: S Church
Date published: 2018-03-08

I am removing paint from small wood carvings.  Will this work with soda?

Asked by: Blasterbob
This blaster will work perfect with soda media.
Answered by: S Church
Date published: 2018-07-02

What would be the best media to use with the blast out of a bucket kit to prep chrome engine covers for powder coating?

Asked by: doc831
Aluminum oxide and Glass bead would be great options.
Answered by: KHoffnagle
Date published: 2018-03-08

Using this setup, what would be the best media to strip paint/body filler from an engine compartment?

Asked by: Dagass
The aluminum oxide would be a great option.
Answered by: S Church
Date published: 2018-03-08

If this requires at least 80 PSI, what would you consider to be too high in terms of pressure?

Asked by: ChedNoseby
Usually the upper end of the spectrum would be around 120 PSI.
Answered by: S Church
Date published: 2017-10-05

You mention using soda or glass bead for an engine block with this gun; walnut shells would typically be preferred for that, can this gun handle typical walnut shell media?

Asked by: slinkygn
This gun will only be able to shoot out a media that is 60 grit or finer.
Answered by: SWhitehurst
Date published: 2018-05-13

Would the blast out of a bucket kit be effective in removing oxidization from an aluminum transmission case.

Asked by: robert48
With a Soda or glass bead media this would work perfectly.
Answered by: S Church
Date published: 2018-03-08

Would this remove oxidization from aluminum engine block

Asked by: robert48
With a media such as soda or glass bead this would be perfect.
Answered by: S Church
Date published: 2018-03-08

What media can be used with this gun? I have an old truck I want to soda blast and a horse trailer I want to sand blast, I don't have a lot to spend, nor do I have many jobs to do, just a beginner here.

Asked by: Liza
This unit can run 60 grit and finer blast media and soda media. We do not recommend running sand as it is very dangerous to your health.
Answered by: S Church
Date published: 2017-10-05

Is there much of a difference between this siphon blasting kit and Eastwood Blast Out of a Bucket Abrasive Gun? As the other is less expensive. Thank you in advance.

Asked by: jackie27
This kit works much better than the less expensive siphon kit. As S Church mentioned, this is our newest upgraded model. It is a high performance gun that draws 14 in Hg of vacuum at 80 PSI. It also features a more durable hose. This gun works so well, it is the gun we feature in our Eastwood Blast Cabinets.
Answered by: Nick C
Date published: 2017-11-30

Will this siphon blaster remove rust from rebar? We need a simple portable system to remove rust from rebar in spalled concrete prior to placing the new mortar in the concrete spall. Typical rebar is #4 or 1/2". If so, what type of media would work best?

Asked by: Concrete Rehabber
This certainly could blast rebar clean. We would recommend using Aluminum oxide.
Answered by: S Church
Date published: 2016-10-07

Can a soda blaster be used to take off lacquer from hard woods?

Asked by: pvbx1
A soda blaster can certainly remove paint from hard woods.
Answered by: S Church
Date published: 2016-10-05

Can it beused as a soda blaster as well as a media blaster

Asked by: Fathog
This can be use on both Soda and more aggressive media.
Answered by: S Church
Date published: 2017-03-28
  • y_2021, m_11, d_27, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.20
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_36
  • loc_en_US, sid_21109, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 83.36ms
  • QUESTIONS, PRODUCT
Eastwood Blast Out of a Bucket Kit
$53.99
In Stock