Horsepower & Torque: 600 Horsepower / 530 FT. LBS Torque
Cylinder Heads: BluePrint Engines LS3 Aluminum Cylinder Heads
Compression Ratio: 11:1
Camshaft: Hydraulic Roller Cam - .624 Intake / .624 Exhaust Lift and 239 Intake / 255 Exhaust Duration @ .050 - 114° LSA - Three Bolt Cam
Pistons: Forged
Crankshaft: Steel Crank - 4.125 in. Stroke and 6.125 in. Rods
- Horsepower & Torque: 600 Horsepower / 530 FT LBS
- Compression Ratio: 11:1
- Aluminum Heads
- Hydraulic Roller Cam
- Forged Crank
- Forged Pistons
Block:
- BluePrint Engines High Strength Cast Iron Block
- Increased Deck Thickness and Strength Webbing
- Extended Cylinder Skirt
- Priority Main Oiling
- 4.0685 in. Bore
- 6-Bolt Main
- 1-Piece Rear Main Seal
- Improved Water Jacket Design
- Utilizes OEM LS3 Front and Rear Covers
Rotating Assembly:
- New Forged Crankshaft
- 4.125 in. Stroke
- Forged 6.125 in. Connecting Rods
- Forged Pistons
- Internally Balanced Front and Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -PS8015
- 69cc Chamber
- 2.165 in. Intake / 1.590 in. Exhaust Valves
- 259cc Intake / 102cc Exhaust Runners
Cam Specs:
- Hydraulic Roller
- .624 Intake / .624 Exhaust Lift
- 239 Intake / 255 Exhaust Duration
- @.050-114 Degree Lobe Separate
Ignition Timing:
- ECM Supplied with Calibration
- Not Capable of Transmission Control
- Transmission Controller Required
Also Includes:
- Valve Covers
- LS Swap Oil Pan
- Timing Cover
- Drive by Wire Throttle Body
- Engine Harness and ECU Kit
- LS3 Fabricated Intake Manifold
- Injectors and Fuel Rail Kit
- Coil Packs
- Spark Plugs and Wires
- Harmonic Balancer
- Throttle Pedal
- Installed Complete Black front accessory Drive. WP, Alt, P/S, A/C, all belts and pulleys.
Notes:
- This engine requires a non-weighted flex plate/flywheel.
- Recommended fuel: 91 Octane.
- BluePrint Engines recommends a 2200+ RPM stall converter.
- Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars.
- Not for use in pollution-controlled vehicles or in dry sump applications.
- The Included BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.
- The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
