Eastwood Pressure Blaster Model 110

Item #22011 Brand:Eastwood

Made in the USA
Eastwood Pressure Blaster Model 110
110-lb. blaster for heaviest-duty rust-paint removal; 30-50-minute blast time
- +
Quantity: close

In stock

Eastwood Service Plan

With An Extended Service Plan From Eastwood

Learn More

The Eastwood Service Plan*

Protect your purchases and enjoy the benefits:

  • 24/7 support
  • No deductibles, no additional fees
  • Parts & labor costs included
  • Transferable coverage and more

Rest assured that your product is covered. The plan begins once your manufacturer`s warranty ends.

Your Service Plan documents will be emailed to you within 2 days of purchase.

*Not all shipping States are eligible for Eastwood Service Plan coverage. You will be prompted during checkout if your selected shipping State is ineligible.


Eastwood Professional Abrasive Blaster handles your heaviest-duty rust and paint removal projects, day in and day out.

  • 10 cfm at 90 psi
  • 1/2"-I.D. hose, 10' long
  • Includes 1/8" and 3/32" nozzles
  • ASME-certified tank, 110-lb. media capacity

Just hook this 110-lb.-capacity pressure abrasive blaster to your air compressor, put on the appropriate hood and respiratory protection, fill with blasting media and you're ready to blast away rust and old paint.

About Eastwood Pressure Blaster Model 110

Built for the professional body shop, with a strong welded hopper, 2 heavy-duty nozzles, heavy-wall blast hose and safety pressure-relief valve, so it's rugged, durable, and very efficient for everyday use. Don't skimp with one of those low-cost units that frustrate you with clogging and sporadic media spraying. This Eastwood pro pressure blaster completely strips the average frame in less than a day, rather than weeks using other units or methods. Designed for high flow with minimal air input; a compressor producing a minimum of 10 cfm at 90 psi will work well. 22" x12" x 32" tall overall. 2-year limited warranty.


110-lb.-capacity Professional Abrasive Blaster
Two 1/8" Nozzles (each needs 15 cfm at 80 psi)
3/32" Nozzle (needs 7 cfm at 80 psi)
10' long, 1/2"-I.D. Abrasive Hose with automatic shut-off deadman valve
3 Seal Blocks
Top-loading, ASME-certified, pressure-tested Tank
Pressure Gauge
Blast Hood


22007A Deadman Valve Seal Blocks, Pack of 3
22012 Ceramic Nozzle, 3/32"
22013 Ceramic Nozzle, 1/8"
22015 Ceramic Nozzle, 3/16"
22016 Ceramic Nozzle, 1/4"
22017 Ceramic Nozzle, 5/16"
22005 Pull-Up Plunger Gasket

Blast Media Selection Chart

70/100 Glass Bead 100/170 Glass Bead 10/40 Ground Glass 40/70 Ground Glass 60 Grit Silicone Carbide 60 Grit Aluminum Oxide 90 Grit Aluminum Oxide 12/20 Walnut Shells


WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye and body protection must be worn during use. Inhalation of silica particles can cause cancer and other deadly diseases. Wear NIOSH-approved respiratory protection during operation.


This Pressure Blaster is ideal for cleaning larger parts that do not easily fit into a blast cabinet. The 90-psi pressure behind the abrasive, combined with the siphoning action at the bottom of the tank, delivers an aggressive blast that quickly removes paint and rust. Pressure blasters are many times faster to use than siphon blasters. To minimize the likelihood of distorting sheet metal, reduce pressure to 80 psi, increase gun distance at 45 degrees to the surface. Be sure to wear all appropriate safety equipment. Use with 80 grit or finer blast media. Use of Walnut shell media is not recommended.

Product Video

Eastwood Offers Free Lifetime Technical Support

Click here for product SDS information

Attention California Residents - Proposition 65

Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov


Customer Reviews

Questions & Answers