1955-1957 Chevrolet Tri-Five Aluminum Performance Radiator. V8 Position cars for mount behind (engine side) radiator support.
There is not enough space to put a clutch fan on the front of a SB and still mount the radiator in the V8 position. There is a 6 blade steel fan available through retailers.
**If you have a V8 support and are using the conversion brackets to move the radiator to the front position, you still use CHT562A(K).**

These COLD-CASE radiators are Tig welded 100 percent aluminum and absolutely beautiful. Don't buy a 3 or 4 row aluminum radiator! It doesn't cool as good as these oversize 2 row models.

These radiators are original appearing and have the correct stamping. Once painted, you'd be hard pressed to find a difference over an original versus a COLD-CASE.

• 100 percent TIG welded
• All Aluminum
• Polished OE style tanks
• 16 fins per inch
• Corrugated fins that give more surface area and more thermal transfer
• Pressure tested
• For manual/auto trans
• Direct fitment for 55-57 Chevy (V8 position mount)
• Old Part Number: RPE562