Moisture and Oil-Filter Combination Kit helps your paint-spray equipment work its best by removing moisture and particulates.
- Together remove 99% of contaminants
- Each has 1/2" NPT ports and handles up to 150 psi
Removing moisture, debris and oil aerosols before they get into your air tools is a smart idea for keeping your spray equipment working at top efficiency.
About Compressed Air Moisture and Oil Filters
Together, these moisture and oil separators will remove 99.9% of the contaminants that can ruin paint jobs and your painting equipment.
Coalescing-type oil separator filters particles as small as 0.3 microns, removing 99.9% of oil contaminants with only 1-psi pressure drop. Flow rate is 16 cfm.
Moisture separator ensures dry air to the gun and removes particulates down to 40 microns. Handles up to 115 cfm at 150 psi.
For best results, use both separators, connected in series.
Connect filters as close to air tool as possible. Air should first be routed through the moisture filter before going through the oil filter. The polycarbonate bowl can be washed with soap and water; do not use solvents!
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov