• Home
  • Concours PRO HVLP Detail Gun 1.0mm
Concours PRO HVLP Detail Gun 1.0mm is rated 2.5 out of 5 by 4.
Rated 4 out of 5 by from decent detail gun Shoots good, needs#21 pps. Fan adjust screw sucks.
Date published: 2015-05-25
Rated 3 out of 5 by from Great gun, but... I purchased two of these guns. Gun sprays great, however, fan control knob on one of them was stripped. I contacted Eastwood and left a message for a replacement, no response. I'm having to interchange the fan control knob between the two guns when in use. Because of that, I'm giving 3 starts for the gun... 1 star for disappointing customer service.
Date published: 2015-07-06
Rated 2 out of 5 by from Gun leaks air Upon receiving gun attempted to clean gun as recommended by Eastwood but air bubbled up into paint cup. Called Eastwood and they are sending me a second one will let you know if this one is any good
Date published: 2016-06-25
  • y_2018, m_4, d_22, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_14772, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Can epoxy primer, single stage, or base coat be sprayed with the 1.0 tip?

Asked by: cs01
For small touch up jobs properly reduced portions of each of these paints could be sprayed through the 1.0 tip.
Answered by: Scott C
Date published: 2017-11-14

Is there a DeKups adapter for the detail gun?

Asked by: edlv
We do not currently offer an adapter at this time.
Answered by: S Church
Date published: 2016-12-22

Is this gun a lot smaller then the concourse standard gun...????I need a small gun to get into tight spaces !!!

Asked by: Jim n
These detail guns are a good amount smaller than the full size paint guns. Great for jambs and tighter areas.
Answered by: S Church
Date published: 2018-02-13

I just purchased the 14772 detail gun for tight places.  I was told that the 1.0 tip that comes with the gun would be fine to spray the chassis black on with.  Should I be concerned will this work ok?  Thank you!

Asked by: breeze1260
As long as you have the paint of choice properly reduced you will have no problems spraying it with this gun.
Answered by: S Church
Date published: 2016-02-05

What tips, if any, are available for this gun ?

Asked by: Howie
Right now the 1.0 tip is the only size available for the Concours Pro Detail gun.
Answered by: S Church
Date published: 2015-08-21

I just bought one of these guns and I need a 3M PPS adapter I order the 11549 and it was to big what adapter do I need for this gun

Asked by: Dray
The Eastwood #11549 - PPS #2 (3M 16003) is the correct adapter for the Concours Pro gun. http://www.eastwood.com/pps-2-adapter.html
Answered by: MikeL
Date published: 2015-02-17
  • y_2018, m_4, d_22, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_14772, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Concours PRO HVLP Detail Gun 1.0mm

Item #14772 Brand: Eastwood

Professional quality HVLP detail paint gun, without the professional price

In stock

Only $99.99

Sale $84.97

Free Shipping



Professional quality HVLP detail paint gun, without the professional price

The Eastwood Concours PRO HVLP detail gun goes head-to-head with the top detail guns from the big brands, but at a price the home user can afford. The precision machine work used to produce this gun provides ultra-fine atomization of coatings and years of durability. It features stainless steel internal passages, so it can be used with solvent and waterborne coatings. Engineered specifically to work with smaller air compressors, it requires some of the lowest CFM of any high volume low pressure detail gun on the market.

  • Professional quality at a DIY price
  • Low CFM – Detail gun 3CFM @ 22PSI
  • Ultra-fine atomization from 1.0mm needle/nozzle
  • Compatible with all types of coatings
  • Full line of accessories available

More info...

About Concours PRO HVLP Detail Gun 1.0mm

This Concours PRO HVLP detail paint gun includes a 1.0mm needle and nozzle.


Contains: Concours Pro detail HVLP gun with 1.0mm fluid nozzle, 100cc nylon cup, cleaning brush and gun wrench


11548 3M PPS Adapter, 12412 DeKups adapter, 51687 150cc aluminum cup, 12846z Aerosol Injected Cleaner, 51559 Digital Regulator, 34113 Analog regulator


Click here for product instructions


Always wear eye, skin and respiratory protection. Follow tech data sheet and MSDS of the paint you are applying. Follow paint manufacturer's safety information. Always paint in a well ventilated area, away from open flame and sparks.

Customer Reviews

Questions & Answers

Customers also viewed: