
Details
Contents
Safety
Warranty
Application
Surface must be clean and free of wax, grease and debris. Abrade surface using 36 grit, or finer. Thoroughly mix desired amount of material with 2% liquid hardener. Do not exceed 1/4 inch depth. Allow to cure 15 min before sanding. Abrade with 40 to 80 grit and follow up with 120 grit to desired contour 5. If necessary, apply Eastwood Polyester Glazing Putty (13521zp) for final finishing. Topcoat with quality primer such as Eastwood Epoxy or Urethane Primers. Do NOT return catalyzed material back into can.
Eastwood Offers Free Lifetime Technical Support
Click here for product SDS information
Attention California Residents - Proposition 65

Customer Reviews
Questions & Answers
You may also be interested in the following product(s)
-
Eastwood CONTOUR® Auto Body Glazing Putty
Starting at: $15.99
-
Radius Body Filler Spreaders 5-pk
$3.99 -
Dura Block 7 Piece Sanding Block Kit
$67.99