DCH4 ATK Chevrolet 350 96-2000 Engine Long Block
- 90-Day Returns
- Technical Support
Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity. Your remanufactured engine is tested in several specific ways after being assembled; Multiple Pressure tests. Each component is carefully checked after being cleaned to see if cracks or other defects exist in the casting. After being assembled, we pressurize the water jacket with 30lbs. of air pressure. As a result of these tests, you can be sure your unit will not have coolant leaks. SIM test, After pressure testing, our final check of engine performance is a spin test. We turn the engine at 400 RPM with oil pressure lines attached. The test measures compression on each cylinder, oil pressure, oil flow and allows an easy visual check that oil is reaching all critical areas. This test also allows the rear main seal to be checked for leaks. We produce most engines as long block assemblies that ship with a finishing gasket set and a new oil pump. We also produce many of the most popular engines as dressed alternatives. These engines save installer’s time and money as they come complete with oil pan and/or front cover and in some cases valve covers already installed.
ATK specializes in muscle. With the highest quality internal parts and Dyno Proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty.
Right Head Casting: 906, 12558062
Left Head Casting: 906, 12558062
Crank Casting: 526, 535
Casting Location: V8, Rear Of Block, Top Of Trans. Mount
Special Notes: Plastic Timing Cover, Wide Front Cover Flange .900
Help info: 96-2000. Vortec.Vin R. 2 Bolt Main. F.I. Roller Cam. Block #880. Head #906or 062. Valve Cover Bolts Thru Center. Plastic Timing Cover With Crank Sensor
Help info: Round Dowel Pin Holes. No Water Bypass Into Head
INV Help: 2 Bolt Main , No Fuel Pump Hole
Std Motor Mount Bolt Hole 3/8"X 16
Upc Code: 653517008528
You will receive warranty information and how to return the core in the mail direct from ATK separate from the delivery of the engine.
Core Pickup Request