Item # 11780 BRAND: Eastwood

Deadman Valve for Blaster

Fits Eastwood pressure and soda blasters, and Clarke pressure blasters
Fits Eastwood pressure and soda blasters, and Clarke pressure blasters
Deadman Valve for Blaster is rated 3.7 out of 5 by 6.
  • y_2021, m_8, d_2, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_11780, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 76.22ms
  • REVIEWS, PRODUCT
$23.99
$23.99
Save for Later
Save for Later
Out Of Stock. Due back August 28
Fits Eastwood pressure and soda blasters, and Clarke pressure blasters
  • 90-Day Returns
  • Technical Support
Deadman Valve for Blaster

Description

Replacement deadman valve for Eastwood pressure blaster and also for Clarke pressure blaster. Also works on Eastwood soda blasters

Contents

1 lb, direct replacement for Eastwood units. Overall length 8"

Accessories

Eastwood Abrasive Deadman Valve For Blaster Air Sandblaster Gun Tools

Application Tips

For use with all Eastwood and Clarke pressure blaster and Eastwood soda blaster Used to replace defective or damaged deadman valve.

Safety Information

WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye, & body protection must be worn during use. Inhalation of silica particles can cause cancer & other deadly diseases. Wear NIOSH- approved respiratory protection during operation

Customer Reviews

Rated 5 out of 5 by from Quick easy fix Exact replacement for the Clarke sand blaster. Easy replacement & works like a champ.
Date published: 2021-07-31
Rated 5 out of 5 by from Heavy duty I've used 500 pounds of blast grit and haven't had to replace a nozzle yet
Date published: 2015-05-16
Rated 4 out of 5 by from Seems to work great. Used this to replace the nozzle on a "Brand X" blaster. Big improvement! Haven't used it that much yet, so can't say how well it will hold up.
Date published: 2016-08-29
  • y_2021, m_8, d_2, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_11780, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 36.33ms
  • REVIEWS, PRODUCT

Questions & Answers

What size hose does this valve use?

Asked by: Picky
This is used as a replacement for Eastwood Blasters with a 1/2" I.D. hose. The fitting is not supplied and the inlet thread is 3/8" NPT.
Answered by: John S
Date published: 2020-07-08

How many scfm do i need for sandblasting and pressure whit dead man valve #11780 thank you

Asked by: Swill
Our machines that utilize this require a minimum of 10cfm@90 psi for the best results.
Answered by: Kelly H
Date published: 2020-05-26

do you all have a deadman valvr that doesnt wear out so fast the ceramic does good but the rubber around it that seals it wears very quickly and theres a lot of blow by when you release it ?

Asked by: 65Chevynut
We offer a better quality deadman valve item #22007
Answered by: ZachC
Date published: 2020-02-29

I'm wanting to refurbished my Clarke sandblasting deadman valve and hose but don't find anything bout the hose and dose the valve come with nozzles

Asked by: dutchhollerin
This is just the deadman valve and it does come with a single nozzle installed on the unit.
Answered by: ZachC
Date published: 2020-01-07

Can I use a deadman in my cabinet blaster

Asked by: Dreadneck74
The blast cabinets are designed for the gun to have a separate media draw and a separate air pressure, We would not recommend the deadman valve in the blast cabinet.
Answered by: Bob G
Date published: 2019-12-30

What is the difference between this valve and the valve #22007? Besides the price, is the 22007 a higher quality unit?

Asked by: Prairie Viking
The 22007 valve is a larger unit capable of running much larger nozzles for faster work times. Keep in mind though that the large the nozzle the more air the tool will consume. You'll need a compressor capable of backing up said nozzle size.
Answered by: Scott C
Date published: 2019-07-24

Does this Deadman have replaceable seals Can this be used for Soda, glass bead, walnut AND traditional oxide media or are 2 required or can you just swap out nozzles to a different size when changing media?

Asked by: austin alfa
The nozzles and seal blocks are both replaceable on this deadman valve. It can be used for soda, glass, and oxide medias. As for the walnut shell that really depends on the blaster this is attached too. Our blasters shouldn't run medias more coarse than 80 grit. The nozzles do not need to be swapped between soda and more aggressive medias.
Answered by: Scott C
Date published: 2019-06-16

What kind of fitting is on the hose end of this deadman valve?

Asked by: DIYJOE
This unit has a half inch NPT fitting on the back side.
Answered by: Scott C
Date published: 2018-06-08
  • y_2021, m_8, d_3, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_11780, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 94.3ms
  • QUESTIONS, PRODUCT
Deadman Valve for Blaster
$23.99
Out Of Stock. Due back August 28