Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity. Your remanufactured engine is tested in several specific ways after being assembled; Multiple Pressure tests. Each component is carefully checked after being cleaned to see if cracks or other defects exist in the casting. After being assembled, we pressurize the water jacket with 30lbs. of air pressure. As a result of these tests, you can be sure your unit will not have coolant leaks. SIM test, After pressure testing, our final check of engine performance is a spin test. We turn the engine at 400 RPM with oil pressure lines attached. The test measures compression on each cylinder, oil pressure, oil flow and allows an easy visual check that oil is reaching all critical areas. This test also allows the rear main seal to be checked for leaks. We produce most engines as long block assemblies that ship with a finishing gasket set and a new oil pump. We also produce many of the most popular engines as dressed alternatives. These engines save installer’s time and money as they come complete with oil pan and/or front cover and in some cases valve covers already installed.
ATK specializes in muscle. With the highest quality internal parts and Dyno Proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty.
(1) DF46 ATK Ford 302 80-86 Engine Long Block
Block Casting: EOAE, E0AE, E5AE, E6SE
Right Head Casting: D8OE, E5AE, E7OE
Left Head Casting: D8OE, E5AE, E7OE
Crank Casting: 2MAE, R1J
Casting Location: V8, Right Rear Of Block, Near Oil Pan Surface.
Special Notes: Timing Cover Required, Bolt Down Rockers
Help info: Not H.O! Pass Car 80-85. Trk & Van 80-86! If `80 Check Crank Cast# 2mae Or R1j Only! 3/8" Reach Plugs! If 3/4" Use Df12! 85 Cont. Check For Roller Cam
Help info: Check The Crank Casting #2mae Or R1j
INV Help: Firing Order 15426378.
UPC Code: 653517016820
SHIPPING AND CORE INSTRUCTIONS
Shipping is free and lift gate will be provided.
You will receive warranty information and how to return the core in the mail direct from ATK separate from the delivery of the engine.
Core Pickup Request
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov