Welders and Plasmas Sale
Fathers Day Gift Guide
  • Home
  • Eastwood Digital Electronic Torque-Angle Wrench 1/2in Drive
Eastwood Digital Electronic Torque-Angle Wrench 1/2in Drive is rated 4.3 out of 5 by 26.
Rated 5 out of 5 by from Product works great The tools works great especially for the price. Only hick up is when your torquing there is a slight delay until the tool catches but its count as if its turning but it isn't so just something to lookout for so your specs are accurate.
Date published: 2018-12-26
Rated 5 out of 5 by from May need math with torque angles, but works` I used for head gasket replacement on a Subaru EJ22. Hard to get to bolts in car. This torque wrench was easy to use once I read the instructions through. Did great on torque both peak and track mode. Also the torque angle did well as long as you zeroed and pulled in constant direction. If you have to ratchet back it would add 7 to 10 degrees I noticed before pulling again (at least on mine it did). To over come this you can jot down torque angle before ratcheting back, zero torque wrench again and pull till you get correct angle (previous angle reading before ratcheting and current reading added together). I didn't find this to be much of a problem after figuring out what it was doing. I think this is what some call slop. I am not sure any mfr could work this out not to happen with the ratchet mechanism. Most mechanics may not notice as they do not have to ratchet back and pull again to complete a torque angle pull. Great product and well worth price and money saved over high cost ones. Thanks.
Date published: 2018-06-16
Rated 5 out of 5 by from Great product I bought this because the BMW engine I am working on required precise ‘angle’ setting. I did have some difficulty understanding the instructions as they are not well written, but after experimenting I figured it out.
Date published: 2018-01-07
  • y_2019, m_5, d_21, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_26
  • loc_en_US, sid_13622, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

What about the 104 temperature. It was 104 here today. I need one that can take outside temperature. What happens after the 104 temperature. This is something I need to know and need to know now because I’m about to tear into a truck. Thanks 

Asked by: Iceman
The operating temperature range is where the unit works best and would be guaranteed to be within spec. Outside these ranges the unit may not be as accurate.
Answered by: Scott C
Date published: 2019-03-13

If final angle exceeds maximum torque of wrench,would this damage the tool

Asked by: Tackman
Yes, if you exceed the max torque, you will permanently damage the torque wrench.
Answered by: Kelly H
Date published: 2018-02-26

I am looking for a torque wrench that will measure both angle and torque applied at the same time. I need to torque to a specific angle and then know the torque that was applied at that angle. Is this something this torque wrench will do?

Asked by: sempervolans
Why do you need to know the torque at a specific angle? Torgue at a specific angle is not a spec that I've ever heard of in over 40 years in the business, as a Master Certified Mechanic. Torque angles can be estimated, and be close enough for every application that is not an all out race engine. I used a torque angle guage when Torque angles became relevant, but stopped using them due to the fact, they are mostly inaccurate. I use a bottle of white nail polish, and mark the head and the socket, knowing that each point of the hex is 60 degrees. If you are within 10-30 degrees, that's close enough. I've never had a head gasket failure, that wasn't the result of a defective gasket, as determined by the manufacturer. Use Fel Pro gaskets, and never have an issue.
Answered by: fishinjunki
Date published: 2018-10-12

Will this measure breakaway torque or peak torque being applied to loosen a fastener?

Asked by: Dirttrack28
This is only designed to torque to tightness spec.
Answered by: S Church
Date published: 2017-10-08

Where can this be calibrated if need be?

Asked by: bshaug
Unfortunately these units come calibrated form the factory and are not able to be re calibrated.
Answered by: KHoffnagle
Date published: 2016-08-16

When angle torque is used, can you ratchet and keep track of angle if there is not enough room to complete the angle torque?

Asked by: Dn01
This torque wrench will keep track of the angle if you run out of room and need to ratchet back.
Answered by: S Church
Date published: 2019-02-09
  • y_2019, m_5, d_21, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_13622, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Digital Electronic Torque-Angle Wrench 1/2in Drive

Eastwood Digital Electronic Torque-Angle Wrench 1/2in Drive

Item #13622 Brand: Eastwood

1/2"-drive wrench measures 15-148 ft.-lbs. and rotation angle
Quantity: close

In stock

Only $129.99


< Back


The Eastwood 1/2" Digital Electronic Torque-Angle Wrench is built to provide the precise torque and angle settings for today's vehicles.

  • Measures torque to 148 ft.-lbs. and 20-200Nm (Newton meters)
  • Accurate to +/–4%, clockwise and counterclockwise
  • Backlit digital LCD displays torque setting and torque reached
  • Buzzer sounds when preset torque is reached
  • 72-tooth ratchet turns even in tight spaces

Eastwood's heavy-duty, 1/2"-drive, Digital Torque Wrench measures more accurately than mechanical torque wrenches, and warns you both visually and audibly, so you can achieve the precise torque and rotation angle required for work on current vehicles.

More info...
< Back

About Eastwood Digital Electronic Torque-Angle Wrench 1/2in Drive


Drive: 1/2” square drive (12.5 mm)
Measuring Range: 15-148 lb/ft [2-20 kg.m] / 177-1770 lb/in [20-200 N.m]
Accuracy: ±4% of reading @ 10% to 100% of full scale
Display Resolution:
Units of Measurement: lb/ft, lb/in, kg.m, N.m
Angle Range: 0° - 360° (C.W. / C.C.W.)
Angle Accuracy: ±1°
Display Resolution:
Operating Voltage: 6V (4 x AAA batteries, supplied)
Operating Temperature: 32°F - 104°F [0° - 40° C].


1/2"-drive, Digital Electronic Torque-Angle Wrench comes with calibration certificate and storage case.


1-year warranty.


Click here for instructions


Wear appropriate eye protection

Eastwood Offers Free Lifetime Technical Support

Click here for product SDS information

Attention California Residents - Proposition 65

Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov

< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: