Eastwood 100lb Pressure Abrasive Blaster Scratch and Dent
None Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • 90 Day Returns
- • Lifetime Tech Support
Product Overview:
Description
This is a scratch and dent sale that is non-returnable and non-refundable. Picture shown is representative of what you will receive.
The Eastwood 100-lb. "High-Flow" Pressure Blaster helps you remove rust and paint faster.
- 100-lb. media capacity
- Large 1/2"-I.D. blaster hose and fittings
- 8'-long, heavy-wall blast hose with dead-man valve
- Requires just 10cfm at 90psi
- All-steel welded top-loading hopper and pressure gauge
Bigger is better! Eastwood's "High-Flow" Pressure abrasive blaster features high-volume, extra-large valves, which means more air volume and more abrasive flow for faster removal of rust and paint.
Built for the professional, with a sturdy welded hopper, 1/2" heavy-duty nozzle, heavy-wall blast hose and safety pressure-relief valve, so it's rugged, durable, and very efficient. Don't skimp with one of those low-cost units that frustrate you with clogging and sporadic media spraying. This Eastwood pressure blasting machine completely strips the average frame in less than a day, rather than weeks using other units or methods. Designed for high flow with minimal air input; a compressor producing a minimum of 10cfm at 90psi will work fine. 18.5"H x 12"W.
Rolls easily to your job site. For best results and the most efficient operation, use clean, dry, 80-grit or finer abrasive media. Use of Walnut shell media is not recommended. 1-year limited warranty.
Warranty
Specifications
| Tank Volume | 10 gallons / 100 pounds |
| Hose Length | 8ft.x1/2"i.d. |
| Working Pressure | 60-125psi |
| Air Consumption | 6-25cfm |
| Overall Dimensions | 11 "x17 x 34" |
| Weight | 41 lbs. |
Shipping & Handling
In the Box
Contents
Guides & Accessories
Instructions
Safety Information
Reviews
Questions & Answers
