- Eastwood 18 lb Tumbler
Eastwood 18 lb Tumbler
Eastwood 18 lb Tumbler
Item #20153 Brand: Eastwood
Make your old hardware shine like new!
- Rugged High Speed Bearings for Long-Term Durability
- High-Torque Motor with High Temperature Windings
- 15” diameter, 7.5” deep bowl
- Large Bowl Size to Achieve Maximum Tumbling Action>
- Suitable for Parts Up To 10" Long
- 18 lbs. Maximum Capacity Parts and Media
- Operates on 120 VAC 15 amp ground fault circuit
Vibratory Tumblers offer thorough, gentle cleaning - Automatically - Now you can thoroughly clean and polish small pieces and hardware without the risk of getting them "launched" by a wire wheel. Gentle vibratory tumbling action with the Green Light-Cut Media removes rust from nuts and bolts without rounding edges. Simply stop the tumbler when parts are de-rusted. A brilliant luster can then be achieved by using the Dry Shine Media. The vibratory action works more quickly than a rotating tumbler.
Vibratory tumblers thoroughly clean and polish small parts and hardware, leaving you free to work on other projects. Use the green media to gently remove paint; use the corncob media to lightly polish. When the parts reach the desired luster, they’re ready to be put back in service. The heavy duty vibratory tumbler system includes: 1 bowl, 7 lbs of paint removing media, 7 lbs polishing media, instructions.
- Eastwood 18lb. Heavy-Duty Vibratory Tumbler
- (1) 15" Tumbler Bowl
- 7 lbs. Green Light-Cut Media
- 7 lbs. Dry Shine Polishing Media
• 120V AC / 60 Hz, 1.1 AMP
• 18 lb. Maximum bowl capacity, wet or dry
Assure electrical cord and plug is in safe working condition before use. Do not allow the plug to be exposed to water or moisture. Assure the bowl is securely tightened to the tumbler base before use. If tumber is to be operated for extended periods securely clamp or bolt the unit to the work bench.
Add 7 lbs of green rust cutting media and up to ll lbs of bolts, brackets, washers etc. Large enough capacity for underhood hardware, suspensions bolts and small brackets. Rust removal will take anywhere from a few hours to a few days depending on severity. Once rust is removed, rinse parts with clean water or Pre and put back in the tumbler with 7 lbs of dry shine media.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Questions & Answers
Customers also viewed:
An affordable way to media blast parts without taking up much room in your shopOnly $186.99
Space saving bench top parts washer that’s still big enough for most jobsOnly $81.99
Eastwood 5Lb Tumbler with mediaOnly $96.99