41st Anniversary Sale
  • Home
  • Eastwood 2:1 Urethane Clear Gallon and Activators

Eastwood 2:1 Urethane Clear Gallon and Activators

Eastwood 2:1 Urethane Clear Gallon and Activators

Item #51144ZP Urethane Clear

Delivers the shine and miles-deep appearance of a show-quality finish
  1. Quantity:
    Quantity: close
    Eastwood Urethane Clear 2:1 Gallon
    Item #50250ZP
    Only $80.99

    In stock

  2. Quantity:
    Quantity: close
    Eastwood Urethane Clear 2:1 Activator Quart 2 TO 1
    Item #50252ZP
    Only $33.99

    In stock



< Back


Eastwood European Urethane Clearcoat plus Activator System makes 1-1/2 gallons of premium clearcoat

  • Easy to spray flat, and even easier to polish
  • Long-lasting protection from UV, chemicals and weathering
  • High-solids content to build quickly and avoid shrink-back as it cures
  • Approximate Coverage Per Gallon: 150 SQ FT
  • Maximum operating temperature: 150 Fahrenheit

Eastwood Euro Urethane Clear is a premium 2:1, high-solids clearcoat made from superior European resins. It dries fast, with a beautiful gloss and excellent DOI. Flows and levels easily with no shrinkage or dieback. Features excellent durability and long-lasting UV protection, weathering and everyday wear. Includes 2 quarts Eastwood Low VOC Activator. Mixes 2:1, 2 parts clear, 1 part activator.

More info...
< Back

About Eastwood 2:1 Urethane Clear Gallon and Activators

Thoroughly mix two parts 50250ZP HS Clear in gallons or 50251ZP HS Clear in quarts, with one part 50252ZP HS Clear Activator. For even better spray-ability, 2:1 mix may be reduced with a urethane-grade reducer or other appropriate solvent product. Doing this will improve the flow and leveling. Eastwood suggests using a Zero-VOC reducer to avoid potential compliance issues.

Use caution in mixing materials as HS Clear may begin to gel after approximately two hours (at 70 °F).

HVLP Gun: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 25-30 psi
Conventional Gravity: Fluid Tip 1.3-1.6 mm Inlet Spray Pressure 45-50 psi
Conventional Siphon: Fluid Tip: 1.4-1.8 mm Inlet Spray Pressure 45-50 psi

Apply Eastwood HS Clear in two medium wet coats, with a 10-minute flash period be- tween each. Clear should be dry to the touch within 10 minutes, and will be tack-free within three hours (at 70 °F). Do not recoat between one and eight hours after previous coat. Additional coats may be applied after eight, but before 18 hours (at 70 °F) have passed from completion of previous coat. Ideal application temperature is between 70°F and 90°F.

For increased depth and gloss, well cured clear may be wet sanded and recoated with one to two additional wet coats.


(1) Gallon 50250ZP Eastwood Urethane Clear
(2) Quarts 50252ZP Eastwood Urethane Clear 2:1 Activator
Makes 1.5 gallons of clear


paint guns, tape, masking paper, wet sanding products, paint suits, respirators, mixing cups


Click Here for Urethane Clear Tech Sheet


Always wear eye, skin and respiratory protection when painting follow instructions on can label


Made in USA

Product Video

Eastwood Offers Free Lifetime Technical Support

Click here for product SDS information

Attention California Residents - Proposition 65

Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov

< Back

Customer Reviews

< Back

Questions & Answers