800-343-9353 
Chat 
BIG SAVINGS with the MP200i, Cut 60 and Cart!
This multi-process welder from the Eastwood Elite series is designed to do it all. It includes pro-grade torches for MIG, TIG and stick welding that use common consumables. The 200-amp output is enough to weld up to 3/8-in. thick steel, and with an Eastwood Spool Gun you can weld aluminum, too!
The Eastwood Elite MP200i Multi Process Welder Features:
- MIG, Stick or TIG Weld
- Latest IGBT Inverter Technology
- 120 VAC or 230 VAC Input Voltage
- 200-amp maximum welding output
- 40% Duty Cycle @ 90A 120 VAC
- 20% Duty Cycle @ 200A 230 VAC
- Welds up to 3/8-in. thick steel
- Built-in Spot Weld Timer
MIG and Flux Core Welding
TIG Welding
Stick (ARC) Welding
The Eastwood Versa-Cut 60 Plasma Cutter Features:
- 120 or 240 Volts AC input
- Cuts thin sheet metal to thick 7/8-in. thick plate (cuts 3/16-in. on 120 VAC)
- Digital amperage readout for increased precision
- Long 20-ft. torch cable and 10-ft. ground cable with clamp
- Rated 60 amp output on 240 VAC; 30 amp on 120 VAC
- Lightweight and Portable - only 31 lb!
- 2T/4T Torch Mode for smoother long cuts
- Durable Duty Cycle of 60% @ 60 amps on 240v and 60% @ 30 amps on 120v
- Uses common consumables that are available at Eastwood or most welding supply stores
- Backed by Eastwood's no-hassle 3-year warranty
- Due to the High Frequency start feature, we do not recommend using this machine on a CNC plasma table.
The Eastwood MIG-TIG-Plasma Cart Features:
- Top shelf holds a welder
- The bottom shelf holds a Versa Cut Plasma Cutter
- The middle shelf of the welding cart allows storage of necessary welding accessories
- The Gas Bottle Mount incorporates a TIG Rod Holder to store up to 6 different tubes of filler rods
- The design of the top shelf allows for the side access door on the MIG’s to be opened without taking the welder off the cart
- Heavy duty front castor wheels
- Molded Heavy Duty Rear Wheels
- Satin Black Powder coated finish
- Cut out in rear to allow plasma cutter cable routing through the rear of the cart
- Holds up to an 12
What's Included
- (1) - MP200i Dual-Voltage, Multi-Process Welder
- (1) – Adapter Cord, 12 Ga., 3-ft. [0.91m], 120Volt 30 Amp Plug/NEMA 50R Receptacle
- (1) - Shielding Gas Regulator
- (1) - Shielding Gas Hose, 4.6-ft. [1.4m]
- (1) - Ground Clamp with 10-ft. [3m] Cable
- (1) - Trafimet ERGOPLUS 24, Tweeco Style MIG Torch. 10-ft. Length. (0 .030-in./0.8mm contact tip installed)
- (5) - Spare 0.030 Contact Tips
- (1) - Electrode Holder with 12.5-ft. [3.8m] Cable
- (1) - WP-17v TIG Torch with 10-ft. [3m] cable, 14-ft. [4.3m] Gas Line
- (1) - #4 Gas Nozzle (1/4-in.)
- (1) - #5 Gas Nozzle (5/16-in.)
- (1) - #6 Gas Nozzle (3/8-in.) (Installed)
- (1) - Short Black Cap (Installed)
- (1) - Long Black Cap
- (1) - Collet Body, 1/8-in. [3.2mm] (Installed)
- (1) - Collet, 1/16-in. [1.6mm] (Installed)
- (1) - Collet, 1/16-in. [1.0mm]
- (1) - Collet, 1/16-in. [2.0mm]
- (1) - 1/16-in. x 6-in. Tungsten (Gray)
- (1) - Welding Wire Spool, 2lb., 0.030-in. Solid Wire
- (5) - Welding Rods, 1/8-in. E6013
20645 Spool Gun for welding aluminum is optional and not included. A foot pedal for TIG welding cannot be connected to this unit. It utilizes the torch trigger for TIG welding.
- Versa-Cut 60 Amp Plasma Cutter
- (1) Trafimet CB70 Torch and 20-ft. Supply Line
- (1) 10-ft. Ground Lead and Clamp
- (1) NEMA5-15P to NEMA 6-50R, 20-ft. (240v to 120v Cable)
- (1) Torch Flow Tester
- (1) Electrode Wrench
- (1) Replacement Electrode
- (1) Replacement Nozzle
- (1) Instruction Manual
- Welding Cart with Hardware and Instructions
Instructions & Guides
Safety Information
Always where eye, hand and face protection when cutting. Click here to see safety products
specifications_ax
MP200i Specifications
| Input power: | VAC 120-230 |
| Frequency: | 50/60 Hz |
| Rated input current: | 20 Amps 120 VAC - 36 Amps 230 VAC |
| Rated working voltage: | 18.5 volts @ 120 VAC - 24 volts @ 230 VAC |
| MIG welding current: | 30-90 A @ 120 VAC | 30-200 A @ 230 VAC |
| TIG welding current: | 20-90 A @ 120 VAC | 20-200 A @ 230 VAC |
| Stick welding current: | 30-70 A @ 120 VAC | 30-170 A @ 230 VAC |
| Rated duty cycle: | 120 VAC 40% @ 90A - 230 VAC 20% @ 200A |
| Weight: | 34 lb |
| Versa Cut 60 Specifications | |
| Input: | 240 VAC and 120 VAC, 50/60 Hz, 1 Ph |
| Rated Input Current 120 VAC: | 39.4 Amps |
| Rated Input Current 240 VAC: | 44.5 Amps |
| Output Current Adjustment 120 VAC: | 20 - 30 Amps |
| Output Current Adjustment 240 VAC: | 20 - 60 Amps Amps |
| Output Voltage on 120 VAC: | 88V - 92V |
| Output Voltage on 240 VAC: | 88V - 104V |
| Power Cord Receptacle Plug: | NEMA 6-50P |
| Power Cord Length: | 6-ft. |
| Output: | 60 Amps |
| Duty Cycle: on 120 VAC: | 60% @ 30 Amps and 100% @ 23 Amps |
| Duty Cycle: on 240 VAC: | 60% @ 60 Amps and 100% @ 46 Amps |
| Torch: | Trafimet CB70 |
| Torch Tip: | 0.1mm |
| Max Cut: | 7/8-in. on 240 VAC; 3/16-in. on 120 VAC |
| Air Compressor Requirements: | 5-7 cfm @ 20 - 60 psi |
| Torch Cable Length: | 20-ft. |
| Ground Cable Length and Gauge: | 10-ft. long, 5 gauge wire |
| Cooling Method: | Fan |
| Air Connection Thread: | 1/4-in. NPT |
| Unit Dimensions: | 17.01-in. Long X 14.69-in. Tall X 8.46-in. Wide |
| Unit Weight: | 31 lb |
| Welding Cart Specifications | |
| Total Height | 26-in. |
| Total Width | 16-in. |
| Total Length (not including Handle) | 32-in. |
| Total Length (including Handle) | 38-in. |
| Top Shelf | 11.75-in. W x 20-in. L |
| Middle Shelf | 11.75-in. W x 15-in. L |
| Bottom Shelf | 11.75-in. W x 17.5-in. L |
| Maximum Weight Capacity | 350 lb |
*Note: Specifications are approximate and subject to change.
Unsure of a term? Look it up in our Glossary powered by The Garage
Is the versa cut 60 a high or low frequency start? I am trying to find a cutter compatible with arc droid.
This versa-cut unit is a high frequency start.
Date published: 2025-10-22
can i add a foot petal to my tig on this machine: Eastwood 200 Amp Multi-Process Welder and 60 Amp Versa-Cut Plasma Cutter plus Welding Cart.and if so how do we do that.never tiged before .
As stated in the web description: 20645 Spool Gun for welding aluminum is optional and not included. A foot pedal for TIG welding cannot be connected to this unit. It utilizes the torch trigger for TIG welding.
Date published: 2025-10-22
Will this welder accept a spool gun to mig weld aluminum?
Yes the spool gun needed is the Eastwood MP140i MP200i Spool Gun, 20645
Date published: 2025-11-23
Is this unit "too much" for a car project?
Eastwood 200 Amp Multi-Process Welder and 60 Amp Versa-Cut Plasma Cutter plus Welding Cart
Sale
$1,659.97
Reg.
$1,949.99
Save
$290.02
In Stock