90 day Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
2K Ceramic Chassis Black is our most durable, chemical-resistant, and easiest-to-spray Chassis Black yet!
Eastwood's 2K Ceramic Chassis Black is a super-durable coating that's not only beautiful, but also tough as nails. Our proprietary formula imbeds finely ensures a high-quality 2K (2-component) 4:1 urethane base to create the ultimate, factory-correct finish. You'll need 2 quarts of Chassis Black for a full-frame vehicle.
You asked for a tough, super-durable chassis coating, so our R&D team developed Eastwood's 2K Ceramic Chassis Black. It's a chip- and chemical-resistant coating with incredible abrasion- and UV-resistance, fast dry times and a finish that's second to none. When laid over Eastwood's 50242ZP 2K Epoxy Primer, it gives you a no-worry finish that will last and last. Withstands up to 300 degrees F.
Also available in Satin: Click Here
If your driving goes beyond the ordinary, you can’t settle for an ordinary underbody paint. Eastwood 2K Ceramic Chassis Gloss is the best black automotive paint for off-roaders, racers and those who live in colder climates. It’s the last action hero of frame coatings, combining toughness and good looks in one package. Our exclusive two-component urethane paint is formulated with nano-ceramic technology that makes it as strong as any epoxy. At the same time, it remains easy to apply using an HVLP gun, making it a professional-quality choice for the average DIYer.Trust this high-gloss chassis paint for protection against rust, corrosion, chips, fuel stains, UV fade and more with an irresistible shine.
You’ll receive one gallon of 2K Ceramic Chassis Black and a 4:1 medium activator. When mixed, they cover roughly 200 square feet of metal. Use Eastwood Black Epoxy Primer on bare metal and Eastwood Rust Encapsulator on rusted metal for even better performance. We’ve been the DIY automotive leader since 1978 with paints, parts and accessories that Do the Job Right.
Always wear appropriate eye, skin and respiratory protection when using this product. Always apply in a well ventilated area, away from open flames.
Consult MSDS for specific safety warnings and hazards.
Product information sheet - Click
Use on full and partial frames, floor pans/undercarriages, suspension components, off-road and race vehicles, roll cages. Eastwood 2K Ceramic Chassis Black is easily applied with your HVLP spray gun using a 1.3mm or larger nozzle. Provides complete hiding in 2 coats; allow 10 minutes between coats. Refer to product label for more complete application directions and safety information. Can be applied directly over our 50242ZP Epoxy Primer (sold separately) after 60 minutes to 5 days without scuffing.
Generally 2K Ceramic Chassis Black can be applied over most thoroughly cured finishes (finishes that cannot be indented with a thumbnail). Scuff first with 320-600-grit sandpaper and test a small area before coating the entire area. If lifting occurs, remove the lifting paint, sand the surrounding area, and seal the surface by priming first with 50242ZP Epoxy Primer mixed with 50243ZP Epoxy Primer Catalyst.
To get $10 OFF your order!