Item #
50545ZP 2K Satin Chassis Black
BRAND: Eastwood
Eastwood 2K Ceramic Chassis Black Satin and Activator
Our most durable, chemical-resistant, easiest-to-spray, chassis black
Our most durable, chemical-resistant, easiest-to-spray, chassis black
Eastwood 2K Ceramic Chassis Black Satin and Activator is rated
out of
5 by
24.
Our most durable, chemical-resistant, easiest-to-spray, chassis black
90 day Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • 90 Day Returns
- • Lifetime Tech Support
Frequently Bought Together
Price for all checked items:
Product Overview:
Description
2K Satin Ceramic Chassis Black — our most durable, chemical-resistant, and easiest-to-spray Chassis Black yet!
Complete a frame restoration or custom build with a high-quality coat of Eastwood 4:1 Chassis Black Paint. This is simply the best DIY frame paint for rust prevention and show-worthy looks. As a two-component coating infused with ceramic, it provides leading protection against UV rays, chemicals, chips, scratches and swirling. The activator helps it harden faster so you’re ready for a clear coat, undercoating or to just get out on the road. A 25-30% satin gloss gives the paint a light sheen that complements the rest of the vehicle.
To use Chassis Black, simply mix the paint and activator thoroughly, then apply using one of our HVLP spray guns. A one-quart can of 2K ceramic paint covers roughly 50 square feet when applying two coats, which is ideal for small vehicles and partial restorations. You will need two quarts of paint and activator for a full-size vehicle frame. Apply this chassis black coating over Eastwood 2K Epoxy Primer or Extreme Chassis Black® Primer for the best results. We provide a 100% customer satisfaction guarantee on your paint job.
Eastwood 2K Satin Ceramic Chassis Black Paint Features:
- Highly chip-resistant
- Incredibly UV-resistant
- Gloss level Approximately 25-30%
- Chemical-resistant
- Dries fast
- 4:1 paint and activator
- Two coats cover approximately 50 square feet
- Withstands temperatures up to 300 degrees Fahrenheit
Eastwood's 2K Ceramic Chassis Black is a super-durable satin coating that's not only beautiful, but also tough as nails. Our proprietary formula ensures a high-quality 2K (2-component) 4:1 chemical base to create the ultimate, factory-correct finish. Must purchase 1 8-oz. Activator for each 1-quart satin Ceramic Chassis Black; you'll need 2 quarts of Chassis Black for a full-frame vehicle.
**Product cannot be shipped to CA**
Now there's a catalyzed urethane form of our popular Chassis Black with a difference. This is our most durable, chemical resistant, and easiest to spray, chassis Black yet! And since it's formulated with ceramic, it offers even better abrasion resistance! Easy 4:1 mix with the 21854Z Activator 8 oz. & spray with a 1.3 or larger nozzle spraygun. Covers about 50 sq. ft. in 2 coats. Withstands peaks up to 300 degrees F. For greatest durability apply over our 50242ZP Epoxy Primer. For professional use only. Contains isocynates. Proper respiratory protection Must Be Used.
In the Box
Contents
Guides & Accessories
Safety Information
Application Tips
Eastwood Ceramic Chassis Black is easily applied with your HVLP gun with a 1.3mm or larger nozzle. Provides complete hiding in 2 coats. Allow 10 minutes between coats. Refer to product label for more complete application directions and safety information. Can be applied directly over our 50242ZP Epoxy Primer after 60 minutes to 5 days without scuffing.
Reviews
Rated 5 out of
5
by
Frank Cyr from
Satin black chassis paint
Im restoring a 66 mustang convertible i replaced the aprons and rails front and rear upper and lower cowls floor pan and much more i used this on the engine compartment and firewall over rust encapsulator flows out nicely with a low sheen great product
Date published: 2025-04-06
Rated 5 out of
5
by
Silverstallion76 from
10/10 will recommend
Very impressed so far..very hard high gloss finish ans it covers really nice
Date published: 2025-03-23
Rated 5 out of
5
by
Matt from
Perfect satin Black
Great poroduct. I first used this on a 90 rear axle I had built from quick performance and loved the finish and it was rough as nails. I used the recommended primer with it. I loved it so much I bought more and used it to refinish the underhood of my 1957 Chevy. Again using the recommended primer.
Date published: 2024-10-18
Rated 5 out of
5
by
Mark S from
1967 Chevy truck, chassis paint
Great paint. Been using this on my 1967 Chevy truck. Frame, bumper brackets, etc . Just wishing the shipping wasn’t so expensive.
Date published: 2023-09-20
Rated 5 out of
5
by
Anonymous from
Love it!
applied using a TP Tools air turbine. using medium activator, with the warm air provided by the air turbine, paint was flashing too quick, also, did not have gun properly set. i'm a novice. Once I adjusted the settings, the paint went down nicely and looks very very nice. Matches almost perfectly with my satin powder coating i use from Eastwood as well as whatever brand the shop used on the larger parts. looks like a brand new car.
i painted the front clip of my 70 Camaro a few years ago and it has been stored inside, in a warm room, paint has had plenty of time to cure. Even tho i probably didn't have the gun adjusted properly, it still looks brand new.
Just did my rear springs. Looks brand new. Had a local shop re arch and assemble the springs and the fresh ceramic paint held up well to the abuse of putting the springs back and installing the front bushings.
Date published: 2023-09-17
Rated 5 out of
5
by
Anonymous from
Goin Commando
I have used the 2k ceramic engine paint with great success, and the chassis paint did not disappoint. Sprays out nice and the high gloos is not over glossy, but that might have to do with spraying over tacky POR15. It looks great. 1973 Jeep Commando
Date published: 2023-04-29
Questions & Answers
which spray tip should be used and at what air pressure setting
Easy 4:1 mix with the 21854Z Activator 8 oz. & spray with a 1.3 or larger nozzle spray gun. You will need to test spray to dial in your pressure and fluid settings for you specific paint gun. For greatest durability apply over our Eastwood Epoxy Primer.
Date published: 2025-05-06
Can this be used over Eastwood OptiFlow Epoxy Primer? How long do I need to wait before applying it over the primer? I plan to brush it on suspension parts after the primer.
No, Eastwood 2K Ceramic Chassis Black Satin and Activator is not recommended to be applied with a brush or roller. It will need to be sprayed with a paint gun for best results. You can use Original Chassis Black or Extreme Chassis Black, if you need to brush or roll it to apply.
Date published: 2025-05-06
Eastwood 2K chassis black and activator can it be used on fiberglass. The powder coating question was a mistake sorry about that
Yes, the Eastwood 2K Ceramic Chassis Black can be applied to properly prepped fiberglass. Ensure the surface is thoroughly prepared by scuffing it with 320-600 grit sandpaper and testing a small area before full application. If lifting occurs, remove the lifting paint, sand the surface, and seal it with a primer before applying the 2K Chassis Black. I would best recommend sealing it first.
Date published: 2025-02-06
Will 2K chassis black need to be thinned to spray? If so, what do I thin it with?
The 2k Ceramic Chassis Black does not need to be thinned to spray. However, if you would like to- it can be cut up to 20% at a max with our Urethane reducers.
Date published: 2023-12-05
Can this product be sprayed directly over Lizard Skin Ceramic Insulation (which you sell) or do you need a sealer/primer over that first? Lizard Skin guys say you can go directly over their product with 2K Urethane, no primer.
Yes, you can go directly over Lizard Skin Ceramic product with 2K Urethane, no primer. You will have to first clean and degrease with Chassis Kleen #55014z or Pre Painting Prep #10041.
Date published: 2023-11-29
Does the 2K Ceramic Chassis Black resist chemical better than urethane?
It is a 2k Ceramic and is somewhat more durable.
Date published: 2023-09-14
I'm going to spray my firewall, inner fenders, and subframe with this. Is this product also a good choice for the metal portion of the dash/cowl in my second gen Camaro? Or would a satin black base/clear be a better choice for the dash?
Its your decision, either would work.
Satin black with clear wouldmake it more glossy than satin, unless you used matt clear.
Date published: 2023-09-13
Can this be sprayed over speedokote epoxy?
Yes, it can
Date published: 2023-09-13
Eastwood 2K Ceramic Chassis Black Satin and Activator
Starting at$90.98
In Stock