Item #
21304
BRAND: Eastwood
Eastwood 30 Inch 3 in 1 Sheet Metal Shear Brake and Slip Roll
Sheet Metal Brake, Shear and Slip Roll all in one
Sheet Metal Brake, Shear and Slip Roll all in one
Chemical Guys JET Seal Sealant and Paint Protectant 16 oz WAC_118_16 is rated
out of
5 by
5.
Sheet Metal Brake, Shear and Slip Roll all in one
1 year Warranty Included
Add an Eastwood Service Plan for additional protection?
Learn More
The Eastwood Service Plan
Protect your purchase with comprehensive coverage
24/7 support
No deductibles, no additional fees
Parts & labor costs included
Transferable coverage and more
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • Lifetime Tech Support
Frequently Bought Together
Price for all checked items:
Product Overview:
Description
Eastwood Sheet Metal Brake, Shear and Slip Roll are three precision engineered metal working tools all rolled into one.
The Eastwood 3 in 1 30" Sheet Metal Shear Brake and Slip Roll Features:
- Bends, Rolls and Shears up to 30" wide
- Works on 20 gauge mild steel 24 gauge stainless and 18 gauge aluminum
- Compact space saving design
- Designed for one person operation
- Create complex shapes such channels, ribs, patch panels, cones, cylinders
Compact design meant to save space and time when working with sheet metal. 6 removable fingers enable you to create boxes and pans up to 30" wide. Adjustable stops for both the shear and brake that enable repeatable actions without measuring each time. Spring loaded hold down enables one handed operation of the shear. This machine was designed for one persons ease of use. Create complex shapes such channels, ribs,patch panels, cones, cylinders and much more in sheet metal, wire and tubing, all with one convenient bench mount tool.
Warranty
Specifications
Roller Diameter: 1.5"
Maximum Material Working Thickness (Steel): 20 Gauge
Maximum Material Working Thickness (Stainless): 24 Gauge
Maximum Material Working Thickness (Aluminum): 18 Gauge
Finger Lengths: 1", 2",3", 6",8" and 10"
Wire Forming Sizes: 1/8", 5/32", and 3/16”
Deepest Box That Can Be Created: 2.5"
Smallest Cylinder That Can Be Created: 1.5"
Weight: 316 lbs.
Construction Material: Cast Iron
Dimensions (Overall): 39" x 15.5" x 23” tall
Dimensions (for the holes needed to bolt down the feet):31-1/8" x 13.5"
Shipping & Handling
Liftgate Service: Is highly recommended, or sometimes required, for delivery of this product. If you have a safe method of unloading without a liftgate, you will have the opportunity to remove liftgate service at checkout. Please note that the truck driver will NOT assist in unloading the product for you. We are not responsible for personal injury or damage to the product resulting from unloading the merchandise without the benefit of a liftgate, delivery dock or forklift.
In the Box
Contents
Guides & Accessories
Instructions
Click here for product instructions
Safety Information
Handling sharp metal can cause serious cuts. Wear thick, well fitting work gloves to prevent cuts from handling sharp metal.
Click here to see safety products
Accessories
Reviews
Rated 5 out of
5
by
Terry Downs from
Great tool! Useful for the medium to small jobs!
The tool works great. The instructions are pretty poor but if you know normal operations of a brake, roller and shear it is pretty apparent how to use it. I bought it with a stand and totally assembled it’s pretty heavy. Used my motor hoist and some nylon chokers to move it around.
Date published: 2023-12-18
Rated 5 out of
5
by
Ken W from
Great machine.
Very well built and easy to assemble. I actually had to disassemble ro make it light enough for two people to transport and move to its final location. Went back together fairly easily. My robotics team is excited to use it. It will save us a huge amount of time.
Date published: 2021-12-03
Rated 5 out of
5
by
Johnny Fab from
Works well right out if the shipping crate.
The 3 in 1 worked well for me right out of the box. I have a lot of work ahead for this tool and it appears to be up to the challange. The only issue i have is where the bolts would go to hold the front of the unit down to the table is not easily accessable without taking the table off. Minor problem all things considered.
Date published: 2021-06-16
Rated 4 out of
5
by
Slavedriver from
Quality control!
The unit looked great when received, however when we tried to use it the levers were locked up. We had to disassemble the pivot and arms on both sides and found they had been hammered (hard peen marks on both items) into place on assembly at the factory! Both chrome pivots were locked into the arms by the paint on the arms. No grease was present! We cleaned the paint off the bearing surface on the arms, the paint on the chrome pivots and then greased them properly. Works great now. ( Had the same problem on the slip roll I bought from Eastwood) Like the tool fine, just don't like the manufacturer's lake of proper assembly!
Date published: 2020-04-13
Questions & Answers
Hello on your 30 break,sheer,roller is there instructions for fine tuning all the adjustments? Thanks for your help
https://www.eastwood.com/images/pdf/21304Q_inst.pdf
Date published: 2023-08-15
After looking at the castings on your machine, they appear identical to the $629.00 machine sold by a leading discount tool company here in the States. The difference being your version is blue and has two handles, which is nice! Is this unit the same?
We do not have manufacturing details for other manufactures products, only Eastwood.
Date published: 2023-08-20
What does the shipping crate weigh ?
I'm not exactly sure as the Freight can be placed in different boxes and I'm not privy to the crate weight
Date published: 2023-11-23
Is the 3 & 1 Brake /Shear / Roll able to shear Stainless steel ? It would be awesome for a 3 & 1 24 -30 inch max to work Cut & Bend 16-18 mild , 20 Gauge Stainless and a deeper box of 4-6 inches deep min. thx
This is only rated for handling 24 gauge stainless steel, sorry.
Date published: 2022-12-13
Radius of die in press break?
The dies in this press brake have a sharp edge and are designed for up to 20 gauge mild steel.
Date published: 2022-05-17
What type and size does the Press Brake dies have?
Finger Lengths: 1", 2",3", 6",8" and 10"
Date published: 2022-04-27
I work with 18 ga. and 16ga. steel. what do you have for this need?
None of these 3 in 1 machines are able to work with that thickness of material
Date published: 2022-01-20
Is the bend radius adjustable?
"A word about Bend Radius: Every gauge and type of sheet metal has a minimum Bend Radius. If an attempt is made to bend that metal sharper than the
allowable Bend Radius, it will fatigue and crack. It is best to consult an online table or a Machinery’s Handbook for the proper Bend Radius however a good
“rule-of-thumb” to employ is never set the distance of the Knife-edge of the Fingers any less than 1-1/2 X the thickness of the metal being bent."
Date published: 2022-06-27
Eastwood 30 Inch 3 in 1 Sheet Metal Shear Brake and Slip Roll
Reg.
$1,049.99
Sale
$899.97
Save
$150.02
In Stock