Item # 31797 BRAND: Eastwood

Eastwood 4 in 1 Ball Joint Service Kit

Remove and install most U-Joints, Ball Joints
Remove and install most U-Joints, Ball Joints
Eastwood 25ft Heavy Duty 110V Extension Cord is rated 4.4 out of 5 by 12.
  • y_2024, m_5, d_19, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasreviews, tv_3, tr_9
  • loc_en_US, sid_31797, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 64.75ms
  • REVIEWS, PRODUCT
$65.99
Loading...
Loading...
Save for Later
Remove and install most U-Joints, Ball Joints

1 year Warranty Included

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

  • • Lifetime Tech Support
Eastwood 4 in 1 Ball Joint Service Kit

Product Overview:

Description

The Eastwood 4 In 1 Ball Joint Service Kit includes all the components needed to remove and install most U-Joints, Ball Joints, Brake components as well as many other automotive based, pressed-in assemblies.

  • Remove and install most U-Joints and Ball Joints
  • Constructed of High Strength Alloy Forgings

This tool is constructed of robust, high-strength steel alloy forgings and will provide years of reliable service.

Warranty

1 Year

In the Box

Contents

(1) Press Frame
(1) Drive Screw with Drive Button
(1) Male Stepped Adapter
(1) Female Stepped Adapter
(1) 2” Dia. Receiving Sleeve
(1) 2-1/2” Dia. Receiving Sleeve
(1) 3” Dia. Receiving Sleeve
(1) 3-3/4” Long Cup Adapter
(1) 2-1/2” Long Cup Adapter
(1) 7/8” Long Cup Adapter
(1) Heavy-Duty, Blow Molded Case

Guides & Accessories

Instructions

Click here for product instructions

Safety Information

Thoroughly read and understand these product instructions before using the Tool.

Impacting metal components of tool may release chips. Wear ANSI approved eye protection while using.

Click here to see safety products

Accessories

 

Application Tips

 

Reviews

Rated 2 out of 5 by from A little too small to be of any use... Eastwood usually makes excellent products, but this isn't one of them. The C clamp is too short to press out or in on anything larger than a mid sized car. Even my Jeep Liberty was to much fire it to handle. Would jump up to a 5* if the clamp were 2-3" wider.
Date published: 2022-04-17
  • y_2024, m_5, d_19, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasreviews, tv_3, tr_9
  • loc_en_US, sid_31797, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 7.27ms
  • REVIEWS, PRODUCT

Questions & Answers

Will the tool work on a Mercedes e320?

Asked by: Skinny
Since this is a universal tool we cannot say specific vehicles. It fits a large majority of vehicles on the market. We can tell you the opening of the tool itself it 6 inches
Answered by: Kelly H
Date published: 2020-10-25

Hello Where is the tool made?

Asked by: Nonrev
This tool is manufactured in China.
Answered by: SeanW
Date published: 2020-10-17

Can this be used with an impact wrench? I had bought another brand that said "Do not use impact wrench". The C-Clamp broke the first time I used it using a 1/2" drive flex handle.

Asked by: Rodney
We recommend not using an impact as it takes away from the "feel" of the tool. If a bolt starts to run right when you're using by hand you'll know it.
Answered by: Scott C
Date published: 2019-02-20

Can this tool be used to replace the control arm bushings and ball joints on the front end of my 1969 Camaro?

Asked by: JoeF
Since this is a universal tool we cannot say specific vehicles. It fits a large majority of vehicles on the market. We can tell you the opening of the tool itself it 6 inches
Answered by: Kelly H
Date published: 2019-03-08

Hello there would this ball joint press work on a 2002 mercury mountaineer 4.0l v6

Asked by: Joe1977
As this is a universal tool we cannot say specific vehicles. It fits a large majority of vehicles on the market. We can tell you the opening of the tool itself it 6 inches
Answered by: Dakota W
Date published: 2019-04-08

Does this work on 2002 Lincoln LS? Have not been able to find correct tool to remove driver side ball joint.

Asked by: Ladyredhead
As this is a universal tool we cannot say specific vehicles. It fits a large majority of vehicles on the market. We can tell you the opening of the tool itself it 6 inches
Answered by: Kelly H
Date published: 2018-09-14

Will this work on a 2001 dodge Durango to remove upper and lower control arm bushings?

Asked by: Neemo
As this is a universal tool we cannot say specific vehicles. It fits a large majority of vehicles on the market. We can tell you the opening of the tool itself it 6 inches
Answered by: Scott C
Date published: 2019-07-01

Would this tool work on replacing the ball joints on my 2014 Jeep Rubicon?

Asked by: Don h
As this is a universal tool we cannot say specific vehicles. It fits a large majority of vehicles on the market. We can tell you the opening of the tool itself it 6 inches
Answered by: Scott C
Date published: 2019-07-01

Has anybody used this tool to change upper/lower control arm bushings on a stock 01 tundra 2wd without needing extra fitings?

Asked by: 01Tundra
We have never tested this unit on a Tundra at this time.
Answered by: Scott C
Date published: 2019-07-01

Does it open wide enough to work on a 2009 Dodge Ram 2500 4X4

Asked by: beesbo
As this is a universal tool we cannot say specific vehicles. It fits a large majority of vehicles on the market. We can tell you the opening of the tool itself it 6 inches
Answered by: Scott C
Date published: 2023-01-07

Will this work for UTVs?

Asked by: Jammbud
Since the new UTV's have very similar setups to cars it is very likely this kit would work. We have never directly tested our products in the Power sports industry though.
Answered by: Scott C
Date published: 2018-04-30

will this work for a jeep tj

Asked by: Austin dav
As this is a universal tool we cannot say specific vehicles. It fits a large majority of vehicles on the market. We can tell you the opening of the tool itself it 6 inches.
Answered by: Scott C
Date published: 2018-06-19

how wide does it go when open all the way

Asked by: V155
This is 6" when opened fully
Answered by: Kelly H
Date published: 2018-04-16

What is the warranty on this ?

Asked by: Dave6066
This unit carries a 1 year warranty.
Answered by: Scott C
Date published: 2020-04-16

Where is this manufactured? Thanks

Asked by: DieselDad
This unit is manufactured in China.
Answered by: Scott C
Date published: 2017-11-08

Type of steel it is made of?????? Will it last if it is used 3 to 4 times a week????? JR A wheel Alignment shop

Asked by: Frontendman
This tool is constructed of robust, high-strength steel alloy forgings and is designed for years of service.
Answered by: Scott C
Date published: 2019-07-01
  • y_2024, m_5, d_19, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_24
  • loc_en_US, sid_31797, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 43.61ms
  • QUESTIONS, PRODUCT
Glossary
Unsure of a term? Look it up on our Glossary powered by The Garage
Eastwood 4 in 1 Ball Joint Service Kit
$65.99
In Stock