Basic Lead-Free Body Solder Kit fills beautifully, easily...and safely.
- File or sand, by hand or power tool, to level
- Spreadable (plastic) range is 428-932 degreesF
- Includes tools and accessories
No need to use lead solder as a body filler when you can use our lead-free version! Basic kit has what you need, including 2 lbs. of lead-free solder.
About Eastwood Basic Lead Free Body Solder Kit
Lead-Free Body Solder is a recent development that is safer and stronger than potentially harmful lead-based body solders. Our lead-free solder clings as well as lead-based on horizontal and vertical surfaces. Spreadable (plastic) range is 428 to 932 degreesF (220 to 505 degreesC); best working range is 535 to 660 degreesF (280 to 350 degreesC). Tensile strength is 9000 psi. Leveling can easily be done by filing or sanding, by hand or power tools, since no lead particles will be dispersed (still, respiratory protection is highly recommended). Propane torch and torch tip are not included (see "Accessories" tab). Soldering torch is not included.
2 lbs. of Lead-Free Solder
1 lb. Eastwood Flux for Lead-Free Body Solder
1 Flat Paddle
1 Half-Round Paddle
Flat Body File
1 lb. of Eastwood Paddle Lube
1 Reusable Fiberglass Acid Brush
Leveling can easily be done by filing or sanding, by hand or power tools, since no lead particles will be dispersed (still, respiratory protection is highly recommended).
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov