Find Anything, Fast!

Need Support or Have a Question?

Click Here
  • Home
  • Eastwood Benchtop Bandsaw
Eastwood Benchtop Bandsaw is rated 3.8 out of 5 by 12.
Rated 5 out of 5 by from Best saw in this price range! Replace your abrasive chop saw with this right now! way less mess, noise, and danger. Way safer set up, and its a SWIVEL HEAD! no more screwing around trying to angle the clamp, which is stupid. that said the handle and trigger could be better, no big deal though.
Date published: 2016-01-08
Rated 5 out of 5 by from Great space saver Bought this over a large bandsaw becausey shop is so small, made a pedestal and rollers for it and it is great. Take the time to set the blade up square both ways, (don't trust miter guage too much) adjust the roller and blade tension, and your off. Odviosuly not an. Industrial saw, but I have made over 100 cuts in aluminum and steel tubing and it has been great. I did have to drill holes in the base to bolt it down, Which probably voids the warranty.
Date published: 2015-08-16
Rated 5 out of 5 by from Stand up customer service 1st one was dropped by deliver company and broke at the front door to my business. Called Eastwood and one was shipped out next day. Came in and plugged it in and did the job I needed perfect. This company knows how to get it done for you with the right kind of service and great tools.
Date published: 2015-07-10
  • y_2018, m_6, d_23, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_20237, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Will this saw cut in a vertical position

Asked by: Albert
This saw does not have a vertical position cutting option.
Answered by: Scott C
Date published: 2018-06-08

Is this saw capable of cutting 1.25" stainless rod?

Asked by: Peter
This saw can certainly cut 1.25" stainless rod.
Answered by: Scott C
Date published: 2018-05-24

Does this saw cut in the vertical position/have a vertical cutting attachment?

Asked by: BigScotsman
This unit does not have the option to cut in the vertical position.
Answered by: S Church
Date published: 2018-05-09

Can only square tubing be used in this saw or can it hold and cut piping?

Asked by: Romulas
Page 5 of the instruction manual shows many different tube shapes and how to arrange them in the saw for accurate cuts.
Answered by: splitpoly
Date published: 2017-04-25
  • y_2018, m_6, d_23, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_20237, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Benchtop Bandsaw

Eastwood Benchtop Bandsaw

Item #20237 Brand: Eastwood

A must for cutting tubing, flat stock, round stock, angle iron easily and accurately when fabricating
Quantity: close

In stock

Only $279.99


< Back


This Eastwood Benchtop Band Saw is a must for cutting tubing easily and accurately when fabricating.

  • Fast, accurate cuts in a variety of materials
  • Powerful, variable speed 1000 watt motor
  • Pistol grip handle and speed control trigger
  • Make perfect miter cuts from 90° to 45°
  • Thin, exact cuts with a narrow kerf
  • Built-in clamp for material up to 3.25in thick
  • Stop bar for repeatedly cutting the same size

It is possible to use a cut-off wheel, angle grinder, reciprocating saw, or even a hacksaw to cut tubing when fabricating. But each of those methods are sloppy, inaccurate, slow, or all three. This bench top electric band saw makes perfectly clean, exact cuts in various materials up to 3 1/4 inch wide. The angle of the cut can be adjusted accurately from 90° to 45° with a built in pivot clamp and markings on the table. A stop bar and material clamp also makes it easy to set up and make multiple cuts of exactly the same length. The thin nature of a band saw blade means a narrower kerf compared to a cut off wheel or circular saw, so positioning the cut in the material for the exact right length is easier. The fact that a band saw moves in just one direction, unlike a hacksaw or Saw-zall, means less chance of the cut position changing as you work through the material. Its compact bench top design makes it easy to store on a shelf or under a work bench when not in use. With a 1000 watt motor and variable speed piston grip it’s easy to cut through nearly steel or aluminum, even solid blocks.

More info...
< Back


1000 watt motor with 3.25 inch throat bandsaw. A 52" long, 1/2" wide blade(20238) with 12-14 teeth per inch is installed in saw. Stop bar.


•Motor Power: 1000 Watts
•Motor Voltage: 120 V AC
•Throat Capacity: 3.25" (85mm)
•Width Capacity: 4.5" (115mm )
•Blade Speed: 100 – 260 ft/min (30 – 80 m/min)
–Circular (90°) – 3.3" (85mm)
–Rectangular (90°) – 3.3 x 4.1" (85 x 105mm)
–Circular (45°) – 2.7” (70mm)
–Rectangular (45°) – 2.5 x 2.9" (65 x 75mm)

It saves space by being able to store the saw on a shelf or under your work bench when not using it. Pistol grip trigger for easy use. Variable speed for better control when cutting different sizes and shapes of material. Easy adjustable material clamp along with a stop bar for repeating same length cuts. Pivot clamp allows for miter cuts from 90 to 45 degrees.


Click here for product instructions


Always wear ANSI rated safety glasses and gloves while using. Stop tool and disconnect from power source before changing blade.


1 year warranty against manufacturer defects. Made in China


Replacement blade 20238

< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: