Eastwood Benchtop Blast Cabinet

Item #30721 Brand:Eastwood

Eastwood Benchtop Blast Cabinet
An affordable way to media blast parts without taking up much room in your shop
- +
Quantity: close

In stock

Eastwood Service Plan

With An Extended Service Plan From Eastwood

Learn More

The Eastwood Service Plan*

Protect your purchases and enjoy the benefits:

  • 24/7 support
  • No deductibles, no additional fees
  • Parts & labor costs included
  • Transferable coverage and more

Rest assured that your product is covered. The plan begins once your manufacturer`s warranty ends.

Your Service Plan documents will be emailed to you within 2 days of purchase.

*Not all shipping States are eligible for Eastwood Service Plan coverage. You will be prompted during checkout if your selected shipping State is ineligible.


An affordable way to media blast parts without taking up much room in your shop. The smart, space efficient design of this bench top media blasting cabinet really can’t be beat.

  • Affordable way to media blast at home
  • Space efficient bench top design
  • Durable powder coated cabinet
  • Holds up to 25 lbs of blast media
  • Holds up to 55 lbs of parts
  • High quality gun with replaceable tips
  • Needs just 7cfm @ 90psi
  • 19in x 15in window lens
  • Full window sized tear offs
  • Fits in just 24in x 20in space

Use with 60 grit or finer blast media.

Use of Walnut shell media is not recommended.

The whole hinged top of the cabinet is both the access door, and the view window. This gives you much greater access to the inside then even some full sized cabinets. Meanwhile, you look down at your work through a big 19 inch x 15 inch screen, with full sized tear off protection (5pk #30770). Dust control is handled by hooking up any shop vacuum to the cabinet, or use it in a well ventilated area with no vacuum. The whole cabinet will take up just a 24 inch x 20 inch space in the corner of your work bench. That means you have nearly 3 cubic feet of work space to blast in. Just about any shop compressor can run it too; it needs just 7 cubic feet per minute at 90 pounds per square inch. The included high quality gun will work with a variety of media, and has replaceable ends for years of usage.


Contains One Blast Cabinet Kit


Electrical current requirement (lamp) 120 Volt AC, 60hz
Air supply requirements 7 CFM @ 90 PSI
Internal Dimensions 22” wide x 18” deep x 12” high


Click here for product instructions

Blast Cabinet Light Wire Connections:

WARNING! Attaching the wrong wires to the wrong switch lugs will burn out the circuitry in the fluorescent Lamp.

The BROWN wire spade connector MUST be attached to the switch lug adjacent to the pre-attached GRAY wire (this is the bottom switch lug).
The BLUE wire spade connector MUST be attached to the switch lug adjacent to the pre-attached BLUE wire (this is the upper switch lug).

70/100 Glass Bead 100/170 Glass Bead 10/40 Ground Glass 40/70 Ground Glass 60 Grit Silicone Carbide 60 Grit Aluminum Oxide 90 Grit Aluminum Oxide 12/20 Walnut Shells


Always wear proper safety equipment when operating this type of equipment. Always fully read and understand the instruction manual before use.


1 Year Warranty


30770 Replacement Tear Off Films; 30772 Replacement Plastic Window; 30773 Replacement Cabinet Air Filter; 30774 Replacement transformer and Switch Box; 30075 Replacement Light Assembly; 20070 Replacement Gloves; 20067 Replacement Blast Gun Assembly; 20068 Replacement Blast Gun Nozzle Kit

Product Video

Eastwood Offers Free Lifetime Technical Support

Click here for product SDS information

Attention California Residents - Proposition 65

Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov


Customer Reviews

Questions & Answers