- Eastwood B20 Benchtop Blast Cabinet
Eastwood B20 Benchtop Blast Cabinet
Eastwood B20 Benchtop Blast Cabinet
Item #30721 Brand: Eastwood
With An Extended Service Plan From Eastwood
The Eastwood Service Plan*
Protect your purchases and enjoy the benefits:
- 24/7 support
- No deductibles, no additional fees
- Parts & labor costs included
- Transferable coverage and more
Rest assured that your product is covered. The plan begins once your manufacturer`s warranty ends.
Your Service Plan documents will be emailed to you within 2 days of purchase.*Not all shipping States are eligible for Eastwood Service Plan coverage. You will be prompted during checkout if your selected shipping State is ineligible.
An affordable way to media blast parts without taking up much room in your shop
- Affordable way to media blast at home
- Space efficient bench top design
- Durable powder coated cabinet
- Holds up to 25 lbs of blast media
- Holds up to 55 lbs of parts
- High quality gun with replaceable tips
- Needs just 7cfm @ 90psi
- 19in x 15in window lens
- Full window sized tear offs
- Fits in just 24in x 20in space
The smart, space efficient design of this bench top media blasting cabinet really can’t be beat. The whole hinged top of the cabinet is both the access door, and the view window. This gives you much greater access to the inside then even some full sized cabinets. Meanwhile, you look down at your work through a big 19 inch x 15 inch screen, with full sized tear off protection (5pk #30770). Dust control is handled by hooking up any shop vacuum to the cabinet, or use it in a well ventilated area with no vacuum. The whole cabinet will take up just a 24 inch x 20 inch space in the corner of your work bench. That means you have nearly 3 cubic feet of work space to blast in. Just about any shop compressor can run it too; it needs just 7 cubic feet per minute at 90 pounds per square inch. The included high quality gun will work with a variety of media, and has replaceable ends for years of usage. Use with 60 grit or finer blast media. Use of Walnut shell media is not recommended.
Contains One Blast Cabinet Kit
• Electrical current requirement (lamp): 120 Volt AC, 60hz
• Air supply requirements: 7 CFM @ 90 PSI
• Internal Dimensions: 22” wide x 18” deep x 12” high
Blast Cabinet Light Wire Connections:
WARNING! Attaching the wrong wires to the wrong switch lugs will burn out the circuitry in the fluorescent Lamp.
The BROWN wire spade connector MUST be attached to the switch lug adjacent to the pre-attached GRAY wire (this is the bottom switch lug).
The BLUE wire spade connector MUST be attached to the switch lug adjacent to the pre-attached BLUE wire (this is the upper switch lug).
Always wear proper safety equipment when operating this type of equipment. Always fully read and understand the instruction manual before use.
30770 Replacement Tear Off Films; 30772 Replacement Plastic Window; 30773 Replacement Cabinet Air Filter; 30774 Replacement transformer and Switch Box; 30075 Replacement Light Assembly; 20070 Replacement Gloves; 20067 Replacement Blast Gun Assembly; 20068 Replacement Blast Gun Nozzle Kit
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Questions & Answers
Customers also viewed:
High-flow dust collector with dual filtration keeps shop almost dust-freeOnly $1,349.99
Our largest, with 20-cfm gun and 12"x45" window, dust collectorOnly $2,299.99
24"x36"x24" interior size Dust Collector includedOnly $1,049.99
Switch "on the fly" between soda and abrasive media...or combine!Only $399.99
Longest-lasting media for fast, effective rust removalOnly $73.99
Works best on softer metals like aluminum, brass and die-castOnly $54.99