90 day Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
Eastwood Black DTM (Direct To Metal) Epoxy Primer 1:1 primes and seals with excellent adhesion and corrosion resistance.
Eastwood's Black automotive epoxy primers are user-friendly, 2-component primer/sealer that dries fast and maintains good color hold-out on steel, aluminum, fiberglass, body fillers and existing finishes.
After shaking/stirring primer, thoroughly mix one part primer
with one part catalyst. No induction time is required with this epoxy system.
SPRAY GUN SETUP
Eastwood Epoxy Primer should be applied in medium wet coats, with
a 30-minute flash period between each (at 70 °F). Typically, one to two coats
is enough to achieve the desired 1 mil. dry film thickness, though more material
may be applied as needed. Additional build requires longer flash periods between
coats. Epoxy primer may be topcoated after approximately 30 minutes (wait
45-60 minutes after applying more than two coats), or up to about five days.
After five days, primer MUST be scuff sanded prior to topcoat application. May be sanded (wet) the day after application. Wait two to three days before sanding dry.
here for product instructions
To get $10 OFF your order!