Enable Accessibility
Promotional desktop banner Promotional mobile banner
Toggle Nav
Do the job right
Search
My Cart
800-343-9353
Menu
Account
Item # Encapsulator 16060 BRAND: Eastwood

Eastwood Black Rust Encapsulator - Paint Over Rust

Stop rust in its tracks! Superior UV Resistance and Convenient Spray Aerosol or Brushable Quarts & Gallons
Stop rust in its tracks! Superior UV Resistance and Convenient Spray Aerosol or Brushable Quarts & Gallons
Eastwood Black Rust Encapsulator - Paint Over Rust is rated 4.3 out of 5 by 15.
  • y_2023, m_3, d_29, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_2, bvpage2n
  • co_hasreviews, tv_2, tr_13
  • loc_en_US, sid_Encapsulator_bv32_16060, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 170.93ms
  • REVIEWS, PRODUCT
Grouped product items
Product Name Qty
Eastwood Rust Encapsulator Black Aerosol 15 ounce
Out Of Stock. Due back July 3
$21.99
  • Buy 3 for $19.99 each and save 9%
Eastwood Rust Encapsulator Black - Quart
Out Of Stock. Due back July 3
$39.99
Eastwood Rust Encapsulator Black Gallon
Out Of Stock. Due back July 3
$154.99

Starting at$21.99

Save for Later
Stop rust in its tracks! Superior UV Resistance and Convenient Spray Aerosol or Brushable Quarts & Gallons

90 day Warranty Included

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

  • • 90 Day Returns
  • • Lifetime Tech Support
Eastwood Black Rust Encapsulator - Paint Over Rust
main product photo
Frequently Bought Together

Price for all checked items:

Product Overview:

Description

Stop rust in its tracks! Rust Encapsulator is the easiest way to stop and prevent rust and corrosion from spreading.

  • Superior durability (tested to 500 hours in a salt-spray chamber)
  • UV Resistance - a topcoat is not needed
  • Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
  • Requires minimal prep and cures fast
  • Available in convenient spray aerosol or brush on quart and gallon sizes
  • Heat resistant to 400F
  • 2%-10% Gloss Level

Simply wire brush any loose rust, wipe with PRE painting prep to clean the surface and apply. Eastwood Rust Encapsulator has proven to be superior in UV resistance, preventing rust creep, and overall durability.

Eastwood Rust Encapsulator has been tested by an independent lab to be one of the most effective rust-preventive products yet. Rust Encapsulator is a great primer for floor pans and other underbody parts. It fills tiny pin-holes and surface irregularities, and is compatible with lacquer, enamel and urethane topcoats (including Eastwood Chassis Black). For the absolute ultimate rust remedy, first brush or spray-on Eastwood Rust Converter, then prime with Rust Encapsulator. One 15-oz. aerosol covers about 10 sq. ft., and contains no isocyanates. One Gallon covers about 160 Sq Ft. Heat-resistant up to 400°F. Made in the USA.

For Improved Protection check out Rust Encapsulator Plus and for ULTIMATE PROTECTION you will want to use Rust Encapsulator Platinum.

FAQs

(Q) Can Rust Encapsulator be applied with the Undercoating System?
(A) Technically, yes, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is Internal Frame Coating or Heavy-Duty Anti-Rust . These products require minimal prep and will creep into seams and pinch welds.

In the Box

Guides & Accessories

Safety Information

Work in a well-ventilated area when applying this product. The use of a respirator is recommended. Shake aerosol vigorously for 2 minutes before spraying.

Accessories

In places where little or no surface prep can be done, our Internal Frame Coating or Heavy-Duty Anti-Rust (16017ZP) is actually a better choice for applying into blind areas such as box sections.

Want 3 Times More Rust Protection?

Eastwood Rust Encapsulator Platinum

Application Tips

Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Wipe down with Pre Painting Prep (10041Z). Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Rust Encapsulator can 10-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68°F. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.

The Rust Encapsulator Quarts and Gallons can be sprayed right out of the can with a conventional HVLP spray gun with a 1.3 - 1.4 tip.

Reviews

Rated 5 out of 5 by from Easy to Apply I purchased this to deal with the rust on a vintage carnival ride that I am restoring. Applying it was a much simpler process than most of the competing products on the market and no need for a topcoat is a bonus. Hopefully its long term performance is as good as its ease of application!
Date published: 2021-06-10
Rated 4 out of 5 by from Great, easy to use product. Great product. Sprays very well through the gun. I have had issue with the rattle cans not spraying consistently but dries flat and and even. Seems very UV resistant as stuff that was painted 2-3 years ago isn't much lighter and flatter than freshly painted. Seems to do a good job holding back rust.
Date published: 2021-06-11
Rated 3 out of 5 by from Spray cans don't spray well...splatters. Multiple cans sprayed at 72 degrees after shaking for the full two minutes plus some... Splatters and will not spray evenly.
Date published: 2022-10-19
Rated 1 out of 5 by from Great stuff if you can get it out of the can The product works, but I have had no luck with the aerosol cans functioning properly. I have three cans that I can't use because the tips are clogged.
Date published: 2023-03-20
Rated 1 out of 5 by from Does not keep Only buy what you need at the time of your project and understand it has only a 90 day warrantee. Has zero shelf life, Despite storing it in the tempeture controlled paint cabinet, it will not keep.
Date published: 2022-08-02
  • y_2023, m_3, d_29, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_2, bvpage2n
  • co_hasreviews, tv_2, tr_13
  • loc_en_US, sid_Encapsulator_bv32_16060, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 39.36ms
  • REVIEWS, PRODUCT

Questions & Answers

Got a frame that's not to bad on rust would I want to do the converter before encapsulator

Asked by: Aj1977
You put the Rust Encapulator right over the surface rust no need to use the convertor first. You just have to get all the loose rust, scale and paint and then clean up all the dust, grease and oil and then just paint it on.
Answered by: Sean H
Date published: 2022-09-09

Would this be a good application for metal siding that is starting to rust at the bottom? If so, can I paint over it to match the rest of the siding?

Asked by: mr16track
Yes, but our Platinum would be the best bet. This can be top coated but we can only technically guarantee with products that we sell. If applying other paints over- test on scrap metal first or on a small section.
Answered by: Kelly H
Date published: 2022-08-09

Does this need to be shaken up or use as is?

Asked by: Moparforlife
This product should be thoroughly shaken or stirred prior to use.
Answered by: ZachC
Date published: 2022-06-27

Do I need to prime rust encapsulator in order to paint it with extreme chassis black?

Asked by: MVC873
No, extreme chassis black can be applied right over the Encapsulator
Answered by: ZachC
Date published: 2022-06-16

I have a cargo trailer that’s roof has surface rust , will this product work and can it be rolled on instead of brushing ? Can I apply a Rustoleum white paint over it to reduce heat inside of trailer ? Should I use Regular rust encapsulator or Plusproduct

Asked by: Big B
Our Eastwood Rust encapsulator, and rust encapsulator Plus can be rolled on without issues. I would recommend a Foam roller for the best surface finish. White Rust oleum can be applied over this product once it is fully dry and cured, At least 24 hours in most applications. I would personally recommend our rust encapsulator plus because it has superior adhesion, film build, and corrosion protection.
Answered by: CodyB
Date published: 2022-05-31

I have some rust encapsulator from 5 years ago...never opened the quarts. Are they still good to use? Is there any shelf life to this paint?

Asked by: Drew
Over time sediments will always settle to the bottom of the can. If you can mix them back in smoothly it would be likely you wouldn't have an issue. We would still recommend applying to a scrap or test piece of metal first.
Answered by: Kelly H
Date published: 2022-05-17

Will this adhere to rustproofing

Asked by: Jlf1
Unfortunately, if not a product of ours- we can not guarantee compatibility. We would have to recommend that you test on scrap metal or a small section first.
Answered by: Kelly H
Date published: 2022-09-26

Can this be used on galvinized metal?

Asked by: smitty
Yes, as long as the surface is properly prepped.
Answered by: Kelly H
Date published: 2022-05-09

Can you use this over rust converter? 

Asked by: Bob34
Yes, this can absolutely be used over our Rust Converter. Just be sire to give it a full 48 hours to convert before applying the Encapsulator.
Answered by: Kelly H
Date published: 2022-05-06

How long does this product take to cure?

Asked by: Nick
This product takes 18 hours to fully cure
Answered by: ZachC
Date published: 2022-04-06

What is the coverage in square feet that you would expect from the aerosol can?

Asked by: Dana
Aerosol cans cover about 10-12 square ft
Answered by: ZachC
Date published: 2022-03-30

Can I use this on the keel of my boat--iron keel, and in fresh water. It will be underwater for for 6 months

Asked by: Sailer
We would not recommend this for the application in reference. Out of anything we have our moisture cure versions of the Encapsulator would be best- the Platinum or the Plus Encapsulator. However even these are really tested for automotive use only.
Answered by: Kelly H
Date published: 2022-03-30

Can I put rust encapsulator over a little bit of filler? Then extreme chassis black primer. Then top coat with extreme chassis black

Asked by: Old pirate
Like any coating really- if applied directly over filler it will "sink" in. Its best to seal off the filler first.
Answered by: Kelly H
Date published: 2022-03-16

Can rust encapsulation be applied over enamel paint? Over rust converter?

Asked by: JLee
Unfortunately, we can not guarantee compatibility between our products and products we do not sell. We would have to advise you to test a small area first or a scrap piece of metal. Furthermore, we would advise you to wait until the paint is fully cured and sanding prior to applying this over. This can absolutely be applied over the Rust converter.
Answered by: Kelly H
Date published: 2022-03-15

There is surface rust that has started to spread on the frame of my cargo trailer. How well will this product hold up to UV when applied to the forward exposed areas of the frame? Will a topcoat of paint be required?

Asked by: PBJ417
This product is 100% UV stable and can be used as a stand-alone paint. However, our Chassis Black line of paints are great options for a durable topcoat for this product.
Answered by: ZachC
Date published: 2022-03-07

Will the rust encapulator 16060z aerosol able to spray with a 24'' extension in any direction besides up.

Asked by: john
The extension hose will spray in a radial pattern. The can itself cannot be sprayed inverted as the pick up tube picks up from the bottom of the can.
Answered by: Kelly H
Date published: 2022-03-07

Can I apply this in cold weather?

Asked by: Ronny
This should not be applied or allowed to cure in temps below 55-60F at a minimum.
Answered by: Kelly H
Date published: 2022-03-07

What do I use as a reducer for this?   I’ve tried spraying with an hvlp gun with a 1.4 tip and it seems to be to thick. 

Asked by: Cris
This can be reduced/thinned up to 20% with Lacquer Thinner.
Answered by: Kelly H
Date published: 2022-03-07

Can a red scuff pad be used instead of 400 grid sand paper to ruff up cured rust encapsolator.

Asked by: Fireman42
Yes, a red/maroon scuff pad would be an excellent option for this.
Answered by: Kelly H
Date published: 2022-03-07

Dose it stand up to oil and brake fluid

Asked by: galaxie66
This product is not fuel/oil resistant.
Answered by: Kelly H
Date published: 2022-03-07

Can it be used to stop corrosion on the bead seat of aluminum or chrome alloy wheel rims??

Asked by: Arlen
If this comes in direct contact with the rust or corrosion it will suffocate it and cut off the oxygen supply so that it can not continue to grow.
Answered by: Kelly H
Date published: 2022-03-07

What outside temperature can the non-aerosol formulation be applied at? Getting cold in the Northeast and wanted to do some touch up work before snow comes. Thanks!

Asked by: Chris
We do not recommend applying this and allowing it to cure in temps below 55-60F at an absolute minimum.
Answered by: Kelly H
Date published: 2022-03-07

If I am going to paint over this product with the body color on my truck, what is the prep I need to do. Scuff and Paint?

Asked by: Jimmy
Please keep in mid we can only guarantee compatibility with the paints and coatings we sell. You will want to test a scrap piece of metal or small area first before applying another brand top coat over everything. This paint can be top coated as soon as 6-8 hours after applying it up until 24. After 24 hours has elapsed since applying this Encapsulator- it will have fully cured and would need to be sanded with 400-600 prior to top coating further.
Answered by: Kelly H
Date published: 2022-03-07

What’s the curing process on it? And can I apply bed liner on top of it how long do I have to wait to add it , and do I have to scuff the encapsulator before applying it ? I would like to add it on too before it fully cures if I could without scuffing 

Asked by: Maxmgm
Full cure for this product will be about 24 hours on average. This product can be used with the bed liner options that we sell but we can not guarantee compatibility with brands we do not sell- you would have to test this on your own. This product can be top coated without the need to sand 6-8 hours after applying your last coat of the Encapsulators.
Answered by: Kelly H
Date published: 2022-03-07

I am redoing a whole frame and axels I'm gonna be preparing the the surface with PRE do I have to wipe or can I spray off with water?

Asked by: Cburris
Water is not recommended- it would invite more rust to occur. Our PRE painting prep or Acetone should be used.
Answered by: Kelly H
Date published: 2022-03-07

Would this product be acceptable for the brake drums (outer surface) on my utility trailer?

Asked by: JD M
This would not be best to stand alone for an application of this sort. If used it should be top coated with one of our 2k paints or 2k clears.
Answered by: Kelly H
Date published: 2022-03-07

What is the heat tolerance of the rust encapsulator? Can I use it on an ATV pipe & muffler or is there another product that would be better?

Asked by: KHiz
We do not recommend using this product on exhaust parts as the temp rating is only 300 degrees
Answered by: ZachC
Date published: 2022-03-07

Would this paint be good for a metal fire escape? It's not in direct sunlight but it is outside.

Asked by: JoeR
Yes, this can be used for the application in reference.
Answered by: Kelly H
Date published: 2022-03-07

Will this Rust Encapsulator also adhere to clean bare metal and scuffed paint areas? I'm looking for a universal base coat for my underbody, which has a lot going on.

Asked by: Tom C
Yes as long as the surface is abraded with 320/400 grit paper and cleaned and degreased.
Answered by: Kelly H
Date published: 2022-06-18

Is this good to use on the exterior body? Is it paintable?

Asked by: broly
This product is able to be used on the exterior body an top coated after 6-8 hours we recommend with our epoxy primer.
Answered by: ZachC
Date published: 2022-03-07
  • y_2023, m_3, d_29, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_41
  • loc_en_US, sid_Encapsulator_bv32_16060, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 156.04ms
  • QUESTIONS, PRODUCT
We found other products you might like!
Eastwood Black Rust Encapsulator - Paint Over Rust

Starting at$21.99