Item # 54529ZP Burnt Mahogany Pearl

Eastwood Burnt Mahogany Pearl 3:1 Single Stage Automotive Car Paint - Gallon

Eastwood Burnt Mahogany Pearl 3:1 Single Stage - 96oz
Eastwood Burnt Mahogany Pearl 3:1 Single Stage - 96oz
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 33.72ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Grouped product items
Product Name Qty
Eastwood 3 1 Burnt Mahogany Pearl - Single Stage - 96oz
In Stock
Reg. $154.99 Sale $139.97 Save $15.02
Eastwood 3:1 Urethane Activator Medium 70-80 Degrees F - Single Stage - 32oz
In Stock
$69.99
Eastwood 3:1 Urethane Activator Slow 80-90 Degrees F - Single Stage - 32oz
In Stock
$69.99
Eastwood Universal Urethane Reducer Zero VOC - 32oz
In Stock
$34.99

Starting at$209.96

Save for Later
Eastwood Burnt Mahogany Pearl 3:1 Single Stage - 96oz

90 day Warranty Included

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

  • 90 Day Returns
  • • Lifetime Tech Support
Eastwood Burnt Mahogany Pearl 3:1 Single Stage Automotive Car Paint - Gallon

Product Overview:

Description

Eastwood Burnt Mahogany Pearl is a rich brown pearl color that fits in the same earth-toned family as Eastwood’s Canyon Dusk Copper and Champagne Metallic, but its much darker and more brown, with nice flashes of gold pearl.

  • Catalyzed urethane for unsurpassed durability
  • Highly resistant to UV rays, chemicals, chips
  • Makes 1 sprayable gallon when mixed 3:1 with a required activator
  • Approximate coverage: 125 SQ FT
  • Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting
  • Made in the USA

This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.

  • Pro Tip: When spraying Single Stage Metallic and Pearl Paints, you can improve appearance by using the special additive Metalli-Flow Metallic Paint Enhancer to help lock and stabilize metallic and pearl particles for a perfect finish.

  • Specifications


    SINGLE-STAGE PAINT MIXING RATIOS
    Thoroughly mix three parts single-stage urethane paint with one part Activator. No additional reduction is required but can be used as needed. Use caution in mixing materials as Eastwood’s single-stage urethane paint may begin to gel after approximately two hours (at 70 °F).

    PAINT GUN SET-UP
    HVLP Gun: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 25-30 psi
    Conventional Gravity: Fluid Tip 1.3-1.6 mm Inlet Spray Pressure 45-50 psi
    Conventional Siphon: Fluid Tip: 1.4-1.8 mm Inlet Spray Pressure 45-50 psi

    APPLICATION INSTRUCTIONS
    Apply single-stage urethane paints in two to three medium wet coats as necessary to achieve sufficient coverage, allowing ten minute flash between coats. Additional coats may be necessary to achieve total coverage for some metallic colors. A final “fog coat” may be applied with metallic colors to help set an even flake pattern and /or adjust flake orientation. A dry film thickness of approximately 2 mil is recommended. Paint should be dust free within 10-15 minutes and tack-free within one hour (at 70 °F). Re-coat anytime after the previous coat has flashed, or before 18 hours. After 18 hours, paint should be abraded prior to re-coating for proper adhesion purposes.

    This urethane paint may be applied as a stand-alone single-stage system, or in combination with Eastwood’s High Solids Urethane Clear as a basecoat/clearcoat system. Additionally, Urethane Clear may be integrated into Urethane color. When combining the two systems, be sure to activate each side (the paint and the clear) separately, with their own activators at the correct mix ratios, before blending.

    When used as a Single-Stage Urethane Paint, this coating may be wet-sanded and polished for increased depth and gloss like any other urethane topcoat. Care should be taken when lightly cutting metallic colors to prevent disturbing aluminum flake.

    FAQs


    (Q) Do I need a clear?
    (A) No, but you should use a clearcoat over metallics.

    (Q) How much paint do I need?
    (A) Typically one gallon per car. If you are also painting jambs, under the hood, or the trunk, use 2 gallons. For large cars and pickup trucks, use 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.

    Guides & Accessories

    Safety Information

    Always wear proper eye, skin and respiratory protection. Always paint in a well-ventilated area away from sparks and open flame. Consult MSDS and product data sheets for proper safety precautions.

    Accessories

    Click here for paint chip chart

    50104ZP Zero-VOC Urethane Paint Reducer
    PRE Painting Surface Prep
    Low-VOC Gray Urethane Primer
    12569 Concours Master Gun Cleaning Kit
    12846Z Aerosol-Injected Cleaner
    SAS Bandit Respirator
    Gen-Nex Painters Coveralls
    15639 Concours LT HVLP Paint Gun 1.3mm

    Reviews

    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getReviews, 4.71ms
    • REVIEWS, PRODUCT
    • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

    Questions & Answers

    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 27.29ms
    • QUESTIONS, PRODUCT
    • bvseo-msg: HTTP status code of 404 was returned;
    Glossary
    Unsure of a term? Look it up on our Glossary powered by The Garage
    Eastwood Burnt Mahogany Pearl 3:1 Single Stage Automotive Car Paint - Gallon

    Starting at$209.96

    In Stock