Item #
69379ZP-69380ZP
BRAND: Eastwood
Eastwood Contour Premium Finishing Glaze
Critical to the final bodywork process, Eastwood Contour Premium Finishing Glaze creates a flawless finish, correcting any small imperfections before primer.
Critical to the final bodywork process, Eastwood Contour Premium Finishing Glaze creates a flawless finish, correcting any small imperfections before primer.
Eastwood Contour Premium Finishing Glaze is rated
out of
5 by
20.
Critical to the final bodywork process, Eastwood Contour Premium Finishing Glaze creates a flawless finish, correcting any small imperfections before primer.
90 day Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • 90 Day Returns
- • Lifetime Tech Support
Frequently Bought Together
Price for all checked items:
Product Overview:
Description
Eastwood Contour Premium Finishing Glaze is a polyester-based formula specifically developed for light filling and final finishing. This finishing glaze is a very smooth and self-leveling formula so it will spread and sand very easily. Uses include filling pinholes, filling sanding scratches and imperfections in bodywork. Hardener Type Included: POB (Benzyol Peroxide).
- Effortless Application and Sanding
- Eliminates Imperfections in Bodywork
- Creates a Flawless Finish
- Polyester-Based For Superior Adhesion and Durability
Warranty
Specifications
Type - Unsaturated Polyester
Color - Blue/Gray
Activator Mixing Ratio - 2-3% by weight
Activator Type - BPO Paste (Benzyol Peroxide) included
Working Time - 3 min at 86F, 6 min at 68F, 11 min at 50F
Cure Time - 15 min at 86F, 20 min at 68F, 30 min at 50F (IR Lamp 5 min at 180F at 32 inches)
Storage - 40F to 90F (no direct sun exposure)
Shipping & Handling
In the Box
Contents
Guides & Accessories
Instructions
Safety Information
Consumables
13919, 59915, 59917, 59918, 31273
Reviews
Rated 5 out of
5
by
Morgan from
Premium Finishing glaze
Nice product for final faring of scratches and other minor imperfections. Great adhesion and sands easily.
Date published: 2025-03-20
Rated 5 out of
5
by
eweig2 from
Very easy to work with!
Great product, will buy again. Love the easy to use container for quick fixes!
Date published: 2020-04-21
Rated 5 out of
5
by
Walt2508 from
Great Stuff
tried using this on my 48 Plymouth. went on great, dried quickly and easy to sand. am looking forward to using this again
Date published: 2016-02-11
Rated 5 out of
5
by
JoeMarsh99 from
Very Good Product
It finishes very nicely and feathers to a fine edge. However, it does clog the sand paper on the initial sanding of its surface. Overall a great product at an affordable price.
Date published: 2015-10-24
Rated 5 out of
5
by
Jerry from
great a++++++
I really love this product very smooth and easy to sand I will buy it again.
Date published: 2015-05-28
Rated 5 out of
5
by
Mafia Matt from
Great product
I am so happy that I ignored the 1 negative review….my experience was opposite what he said…I used it to fill in several pin holes on my 1973 f100 hood. It dried within 10 minutes…i waited 1 hour and sanded with ease…the holes are non existent and the project is back on track….i waited to fill the holes until i had the epoxy and 1st primer coat on…i defy anyone to find where the holes were…Thank you Eastwood!
Date published: 2015-05-20
Questions & Answers
Just to be clear, I take it this is basically just polyester filler ("bondo") formulated to the consistency of lacquer glazing putty?
Essentially, yes.
Date published: 2021-04-29
I just watched 2 different videos on a method of removing clear coat runs on fresh paint job. Both used a 2 part polyester putty/filler to surround the run. starting with 320 grit thru 2000 until all the filler is gone.Could this be used for that?
You know, I only just heard about that method of sanding runs and sags. I'm assuming they're just talking about good ol' spot putty for that which I'm thinking will be a lot softer and easier sanding, and a whole lot cheaper!
Date published: 2021-07-25
I have a lot of chrome trim that have corrosion that left low spots and pin holes in metal. Can this filler be used ? Also can I paint over filler with self etching primer , chrome primer and chrome paint.
A better product for your application would be our Lab Metal. Item #10207Z
https://www.eastwood.com/lab-metal-24-oz.html
Date published: 2019-08-07
Can this glazing puddy be used over the polyester fill primer?
Yes you can apply this glazing putty over polyester primer.
Date published: 2019-10-02
Can this be used on inner fender wells inside the engine compartment? I have some pitting and dings on the inner fender well and need to smooth them out.
The Contour Glazing Putty can be used, just keep the thickness of the putty under 1/16".
Date published: 2019-10-02
Will this work on Aluminum? I have small holes on my trim around my garage door and would to find something to patch and repaint instead of getting a contractor with an aluminum brake and replacing all of it.
Yes, this will certainly be able to be used on aluminum.
Date published: 2019-02-05
Is this filler compatible with the 2K ceramic spray paints? Can I fill holes when the part has been already painted with the 2K sprays and use sand paper for a second coating ?
Yes you can, but you will need to sand the area where the filler is to be applied, to give the filler something to stick to.
Date published: 2018-08-14
Please, tell me what is the difference other than the volume 24oz and 5oz between the two items "EW Contour Glazing Putty" and "Contour Finishing Putty"? Thanks!
These two products are identical. Just different size packaging.
Date published: 2021-04-29
Eastwood Contour Premium Finishing Glaze
Starting at$41.99
In Stock