Item # 21176 BRAND: Eastwood

Eastwood CONTOUR SCT® Finishing Drum 320 Grit

Eastwood CONTOUR SCT® Finishing Drum
Eastwood CONTOUR SCT® Finishing Drum
Eastwood CONTOUR SCT® Finishing Drum 320 Grit is rated 4.5 out of 5 by 2.
  • y_2021, m_10, d_20, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_21176, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 63.39ms
  • REVIEWS, PRODUCT
$21.99
Loading...
Save for Later
Eastwood CONTOUR SCT® Finishing Drum
  • 90-Day Returns
  • Technical Support
Eastwood CONTOUR SCT® Finishing Drum 320 Grit

Description

Prepare custom parts or freshen up old ones using this 320-grit finishing wheel. The Eastwood CONTOUR SCT® Abrasive Finishing Drum is for paint or rust removal applications. As it does so, the drum also conditions metal. The 320-grit version has fine grain for light surface removal, getting bare metal ready for painting and welding or polishing to a shine. Each drum is 4 inches wide and 4 inches in diameter to fit Eastwood’s industry-leading surface conditioning tool.

We’ve designed the 21176 finishing drum to be a durable, long-lasting tool. It’s made of nylon and aluminum oxide with a top speed of 4,000 RPM for professional results. See the Contour SCT Drum Chart below or visit the Eastwood Garage for more information about Eastwood’s offerings. We help you Do the Job Right with lifetime technical support, 90-day returns and more.

SCT Wheel Selection Chart

SCT Wheel Chart

Click On Chart For Larger View

Specifications

  • 4" Diameter
  • Nylon and Aluminum Oxide 320 Grit
  • Max RPM 4000

Contents

Contains One 320 Grit Finishing Drum

Accessories

EASTWOOD CONTOUR SCT DRUMS

SCT Accessory Drums

EASTWOOD CONTOUR SCT NARROW WHEELS

SCT Accessory Drums

Application Tips

 

Safety Information

Always wear ANSI approved protection equipment when using this type of tool. Never attempt to replace a SCT Drum with unit plugged in. Make sure to fully read and understand the instruction manual for this tool before use.

Customer Reviews

Rated 4 out of 5 by from Wears grooves into finishing Drum I ought this to polish some brass parts. The parts contained some sharp edged areas and these wore grooves into the drums very quickly. Great on flat areas UT on contours too expensive to use on areas where it will cause grooves in the drum. I still had to do quite a few areas by hand sanding.
Date published: 2018-03-19
  • y_2021, m_10, d_20, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_21176, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 21.37ms
  • REVIEWS, PRODUCT

Questions & Answers

thinking of buying one, are the abrasives universal, i.e- can I buy the abrasives through msc or McMaster?

Asked by: lewis
We have only tested this product on our own equipment so we wouldn't be able to advise the use with different manufacturers.
Answered by: Dakota W
Date published: 2019-01-15

My 320 grit drum arrived today and has directional stickers on both sides of the drum. However the arrows point in opposite directions, unlike my other drums which point in the same directions. Can the 320 grit drum be used both directions?

Asked by: Jettfire
The drum can be used in either direction
Answered by: Kelly H
Date published: 2019-01-09

Is there a chance that "dips" will occur in body panels requiring bondo or a heavy application of primer surfacer to smooth the panels?

Asked by: ALM123
As long as you keep moving and don't sit in one spot you won't have to worry about creating dips in the panel.
Answered by: Scott C
Date published: 2019-04-19

Is the 9 amp motor big enough? Also where is this product made?

Asked by: Disco dan
Our 9 amp SCT motor is plenty big enough to drive each of the wheels. The wheels are manufactured in China.
Answered by: Scott C
Date published: 2019-04-19
  • y_2021, m_10, d_20, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_21176, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 54.85ms
  • QUESTIONS, PRODUCT
Eastwood CONTOUR SCT® Finishing Drum 320 Grit
$21.99
In Stock