The Eastwood Service PlanProtect your purchase with comprehensive coverage24/7 supportNo deductibles, no additional feesParts & labor costs includedTransferable coverage and more
90 Day Returns + 100% Satisfaction Guarantee
FREE Lifetime Tech Support
The Eastwood Company Warranty
100% Customer Satisfaction Guarantee
At Eastwood we care about your DIY automotive projects and want you to be 100% satisfied with our products. That’s how we’ve done business since 1978.
Warranty periods vary per product and manufacturer.
The warranty period begins on the date the product is delivered.
Warranty refunds and exchanges require proof of purchase.
To obtain warranty coverage, contact Eastwood at 1-800-343-9353 for an RMA number.
FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email [email protected].
The Eastwood Contour SCT® Abrasive Drum is to be used for heavy paint or rust removal applications. Each drum is 4 inches wide and 4.5 inches in diameter. 40% more abrasive material than the original SCT Abrasive Drum for longer life.
Always wear ANSI approved protection equipment when using this type of tool. Never attempt to replace a SCT Drum with unit plugged in. Make sure to fully read and understand the instruction manual for this tool before use.
Rated 5 out of
5 by
Anonymous from
If i ever had a shopping spreeWell if ever given the chance to spend a bunch of money somewhere in a short amount of time. This is the place i would choose. Quality products knowledgeable staff. I feel like one of the guys when i need to pick up something from here.
Date published: 2025-11-04
Rated 5 out of
5 by
Killjoy from
Paint stripping for the DIYerGreat product. Used 40 grit drum to strip my 71 mustang to bare metal. It takes time but, safely gets job done without completely destroying or heating the metal up causing warping.
Date published: 2025-02-09
Rated 5 out of
5 by
Anonymous from
Contour ToolIt works as advertised and more. For a low budget project, its a great tool to remove old paint/rust.
Date published: 2024-11-15
Rated 5 out of
5 by
Bill from
SCT 40 grit stripping drumI’ve used up two of these removing surface rust and paint remnants after applying a stripper with great success. Two complete vehicles.
Date published: 2024-09-29
Rated 5 out of
5 by
Eric from
Like my Eastwood Contour SCT® Abrasive DrumI was very impressed how easy paint and rust came off my vehicle.
Date published: 2024-03-07
Rated 5 out of
5 by
Forrest from
40 grit stripping drumWorks great for large flat areas. Wears out quickly if you catch a sharp edge.
What drum to remove old gaskets? From valve cover, oil pans etc.
Asked by: WagonHo
This drum may be too aggressive. Use a higher grit. 80 grit may do the job.
Answered by: Anonymous
Date published: 2025-12-11
Will this remove bedliner from a truck bed?
Asked by: RonH
It is an aggressive drum at 40 Grit. Depending on the material that need to be removed.
I heard form a customer who removed rust from a metal roof using the Scale stripping tool and the 40 grit.
Answered by: Anonymous
Date published: 2023-04-12
Can u use the contour stripper on fiberglass
Asked by: Stinger314
Depending if your removing paint, off a (Example: Corvette) 40 grit may be too aggressive.
Most fiberglass surfaces have a gelcoat.
80grit may work better, without tearing into the surface.
Answered by: Anonymous
Date published: 2024-02-03
Will this drum fit on the restorer tool?
Asked by: JBaker
This drum is designed to fit our Contour SCT tool. We will not guarantee fitment with anything else.
Answered by: Kelly H
Date published: 2022-07-25
Is there a way to clean the 40 grit drum when it gets clogged with paint, bondo, etc.
Asked by: Suprdave1
We have found our 40 Grit drum to typically self clean in most stripping applications. That being said if for some reason you do find a drum that is clogged, running along the edge of a cinderblock or other piece of masonry will remove the outer most layer of abrasive material and expose new clean abrasive material.
Answered by: CodyB
Date published: 2023-10-26
Why not offer a package of all of the Drums available. Then it might show all of the tasks that can be accomplished. I think the tool is worth having but the cost of individual drums could become cost prohibitive. Maybe multi packs of the most common drum
Asked by: Tonyb427
We appreciate you taking the time to relay some feedback. We will be sure to relay this to our Product Manager of these items.
Answered by: Kelly H
Date published: 2024-05-28
I have looked all around and I can not find anything that indicates how long the drum will last. How many panels can I expect to strip before needing to change the drum?
Asked by: Tommy
Unfortunately, we do not have an estimated life of these drums due to the extremely variable conditions these can be applied to.
Answered by: SeanW
Date published: 2024-07-16
We purchased a Eastwood Contour SCT® Abrasive Drum 4.5 inch 40 Grit to take the paint off a 72 Camaro. Tried it at different speeds, but it bounces s lot and only scratches the paint. Could it be really hard paint or are we doing something wrong?
Asked by: MarkB
I had the same problem while stripping my 56 Oldsmobile. Adjusting to a slower RPM and the 40 grit stripping to was a lot more effective.
800-343-9353 
Chat 
