The Eastwood Service PlanProtect your purchase with comprehensive coverage24/7 supportNo deductibles, no additional feesParts & labor costs includedTransferable coverage and more
90 Day Returns + 100% Satisfaction Guarantee
FREE Lifetime Tech Support
The Eastwood Company Warranty
100% Customer Satisfaction Guarantee
At Eastwood we care about your DIY automotive projects and want you to be 100% satisfied with our products. That’s how we’ve done business since 1978.
Warranty periods vary per product and manufacturer.
The warranty period begins on the date the product is delivered.
Warranty refunds and exchanges require proof of purchase.
To obtain warranty coverage, contact Eastwood at 1-800-343-9353 for an RMA number.
FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email projectadvisors@eastwood.com.
The Eastwood Contour SCT® Abrasive Flap Sanding Drum is to be used for paint or rust removal applications, while metal conditioning at the same time. Each drum is 4 inches wide and 4.5 inches in diameter.
Always wear ANSI approved protection equipment when using this type of tool. Never attempt to replace a SCT Drum with unit plugged in. Make sure to fully read and understand the instruction manual for this tool before use.
Rated 5 out of
5 by
Vinny I from
Time saving toolSaved hours of work and helped give a great finish job
Date published: 2022-07-21
Rated 4 out of
5 by
fordtrknut from
Abrasive Flap Sanding Drum 60 GritThis works great to remove whatever paint is left after chemical stripping the paint. Use light pressure and keep it moving to prevent heat buildup on the sheet metal.
How does media blasting compare to the Sct? I am concerned with two things 1) cost / square foot of sct drums versus media blasting and 2) heat warping on sheet metal sct vs. media blasting.
Asked by: Bob2749
In the long run, the SCT is a more cost effective option. As far as warping the sheet metal, the sct will not warp any metal, as long as you keep the tool moving along the metal.
Answered by: Caleb M
Date published: 2022-04-30
Which drum would be best for removing powder coating?
Asked by: SinisterJKU
We've found either the abrasive drum https://www.eastwood.com/eastwood-contour-sctr-abrasive-drum-4-5-inch-40-grit.html or The expander wheel with 60 or 80 grit paper. https://www.eastwood.com/eastwood-contour-sct-expanding-drum.html
Answered by: MattM
Date published: 2022-04-30
Can it be used to prep aluminum hand rail
Asked by: Ironcrossfab
This drum could certainly be used to clean up and prep an aluminum hand rail. It should be noted though that this might be a bit aggressive for aluminum. In most cases our Interleaf Stripping drums are less aggressive and would probably work much better for your project.
Answered by: Scott C
Date published: 2022-04-30
Would this work for stripping pant off of wood trim?
Asked by: Donald
Although we strictly test for automotive use- we have had numerous customers as well as some employees here who have successfully used this SCT tool on wood surfaces. This particular drum would not be a good option though as it is very aggressive. When using on wood our Expander wheel with drums of sandpaper are the best option. This turns the unit into a drum sander to quickly remove staining and smooths the wood.
Answered by: Kelly H
Date published: 2022-04-30
Removing undercoating?
Asked by: Steve
We would recommend the Abrasive Drum item #21171
https://www.eastwood.com/eastwood-contour-sct-abrasive-drum-4-5-inch.html
