This versatile solid gray can be paired with other colors in a two-tone, used as an accent or by itself.
The Eastwood Service PlanProtect your purchase with comprehensive coverage24/7 supportNo deductibles, no additional feesParts & labor costs includedTransferable coverage and more
90 day Warranty Included
90 Day Returns + 100% Satisfaction Guarantee
FREE Lifetime Tech Support
The Eastwood Company Warranty
100% Customer Satisfaction Guarantee
At Eastwood we care about your DIY automotive projects and want you to be 100% satisfied with our products. That’s how we’ve done business since 1978.
Warranty periods vary per product and manufacturer.
The warranty period begins on the date the product is delivered.
Warranty refunds and exchanges require proof of purchase.
To obtain warranty coverage, contact Eastwood at 1-800-343-9353 for an RMA number.
FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email [email protected].
Eastwood Destroyer Gray - This versatile solid gray can be paired with other colors in a two-tone, used as an accent or used by itself for overall refinish jobs.
Makes 1 sprayable gallon when mixed 3:1 with a required activator
Approximate coverage: 125 SQ FT
Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting
Made in the USA
This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.
Rated 5 out of
5 by
DannyDatsun from
Great FinishPainted my son-in-law's track car with this paint. Very pleased with the results. Sprayed easily, wet sanded and compounded/buffed to a great finish.
Date published: 2025-06-25
Rated 4 out of
5 by
Frochevy from
No more yellow Skoolie!The urethane shot well and looks pretty good for our short school bus conversion! It hasn't been on long, but so far looks great and is holding up well.
Dry times: 15 - 20 min. at 20°C (68°F).
Can be taped after 8 hours.
Wait 12 hours to polish.
Wait 18 hours to handle.
If recoating after 18 hours, the surface must be scuffed.
Answered by: Max S
Date published: 2025-04-15
Can this single stage paint be top coated with Eastwood clear coat?
Asked by: Dustin
Yes it can be, with any of our Eastwood Urethane clear coats.
Answered by: Wil Tech Support
Date published: 2025-02-25
Hello,
Can this be sprayed over the DTM epoxy primer?. (roll-on)
Asked by: Gary
Yes, the Eastwood Destroyer Gray 3:1 Single Stage can be sprayed over our Eastwood Epoxy primers and Urethane primers along with all of our Eastwood Epoxy and Urethane based paints.
Answered by: Wil Project Advisor
Date published: 2023-11-29
what is anticipated coverage?
is one gallon enough for a 50's picup truck?
Asked by: Gary
Approximate coverage: 125 SQ FT
Not sure what truck model, manufacturer you asking about
Answered by: Anonymous
Date published: 2023-08-24
Can i get a swatch of this color?
Asked by: Guymanperson
Unfortunately, we do not have individual swatches of our colors or samples. The only ways to view this is online, at our retail locations or by ordering this chip chart here: https://www.eastwood.com/ew-branded-color-paint-chart.html
Answered by: Kelly H
Date published: 2022-10-24
Can I spray the Destroyer Gray onto Platinum Rust Encapsulator during the encapsulator recoat time? Do you have instruction that I can download for the Destroyer Gray? Thanks for your help.
Asked by: Sisco
Yes, you can if the surface is level and smooth. We have instructions for all of our 3:1 SSU paints which can be found here: https://www.eastwood.com/images/pdf/50200ZPQ_inst.pdf
Answered by: Kelly H
Date published: 2022-09-23
Do I need the reducer?
Asked by: Leo1
While reducer is not needed. Many people like to reduce this paint 5-10% with a Urethane Grade Reducer.
Answered by: ZachC
Date published: 2022-04-06
I'm going the DIY route and of course have a couple runs on my second coat. How long after I spray a coat will I be able to sand/fix the run in single stage paint?
Asked by: Wags
You will want to wait at least 24 hours before sanding and buffing the single stage.
800-343-9353 
Chat 
