Item # 16105Z-16106Z BRAND: Eastwood

Eastwood Diamond Clear DTM and Painted Surfaces Aerosol

Use on bare metal and painted surfaces
Use on bare metal and painted surfaces
Eastwood Diamond Clear DTM and Painted Surfaces Aerosol is rated 4.2 out of 5 by 20.
  • y_2022, m_8, d_12, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_2, bvpage2n
  • co_hasreviews, tv_4, tr_16
  • loc_en_US, sid_16105Z-16106Z, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 101.23ms
  • REVIEWS, PRODUCT
Grouped product items
Product Name Qty
Eastwood Diamond Clear Satin Aerosol
Out Of Stock. Due back October 12
$16.99
Eastwood Diamond Clear Gloss Aerosol
Out Of Stock. Due back October 12
$16.99

Starting at$0.00

Save for Later
Use on bare metal and painted surfaces

90 day Warranty Included

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

  • • 90 Day Returns
  • • Lifetime Tech Support
Eastwood Diamond Clear DTM and Painted Surfaces Aerosol

Product Overview:

Description

Aerosol formulation for the use on bare metal and painted surfaces.

  • Seals and protects surfaces
  • Compatible with all metals and coatings
  • Heat resistant up to 300 degrees F
  • Gloss has a 85% + Gloss Level
  • Satin has a 45%-50% Gloss Level

Use over finished or polished surfaces to protect from corrosion and ultra-violet light.

In the Box

Guides & Accessories

Reviews

Rated 5 out of 5 by from Clear DTM Spray paint Great product! I have not seen "direct to metal" clear spray coatings offered elsewhere.
Date published: 2021-06-22
Rated 5 out of 5 by from Excellent product Great for protecting bare metal from corrosion while maintaining the original look
Date published: 2019-02-18
Rated 5 out of 5 by from What I was looking for! I haven’t used it yet but wanted to seal a freshly blasted bell housing before installation. Reviews were enough for me. Thanks Eastwood!
Date published: 2018-12-30
Rated 5 out of 5 by from Works Great! This is the only clear coat that have found that holds up.Have used on other items in the past, this time around added it to the tunnel ram and carbs.
Date published: 2018-09-07
Rated 5 out of 5 by from Nice look Bought two cans one worked great the other can ha a broken spray button it just would not stay in can otherwise it worked well with the first can
Date published: 2018-06-29
Rated 5 out of 5 by from excellent product sprays & coats well...applied @ 70 deg...50% humid
Date published: 2018-01-05
Rated 5 out of 5 by from Eastwood Diamond Clear Satin review This is my third can and it is really good stuff. I have not seen it chip, color or fade. Plus, I use it on other painted metals and aluminum trim.
Date published: 2017-10-05
Rated 5 out of 5 by from Great for bare metal, quick drying! I use this to protect my bare metal plasma cut signs from surface rusting. Works great! You can lay it on heavy and it doesn't run. Has a nice fan tip thats wide and comfortable for your finger, not the cheap narrow tips most aerosols come with. Drys super fast and leaves a nice smooth finish. Best product I've found for bare metal.
Date published: 2017-09-07
Rated 3 out of 5 by from Must put on very thin Product yellows if put on thick or multiple coats. Only eatwood product iv used that wasn't up to par.
Date published: 2018-12-01
Rated 2 out of 5 by from Not clear Lays down pretty good and dries really fast. It is not actually completely clear. There are spots that are not clear after spraying my black painted radiator support. Was not very happy with the finish. The radiator support was completely and evenly the same shade of black. The Diamond clear resulted in a disappointing finish.
Date published: 2019-08-19
Rated 1 out of 5 by from Total garbage! I wasted over 10 hours of my time and resources polishing and rebuilding 2 Holley carburetors only to have them both oxidize under this useless clear coat in less than 3 months! Safe to say that this product does NOT work as advertised! I’ve been a metal finisher for many years and l have had better results with generic clear coat products at a fraction of the cost!! I’m considerably more than disappointed!! It’s a shame that the rating system only goes as low as one star as even a single star rating for this garbage is way too generous!! To anyone considering using this trash I would direct them to a product called Nyalic..it actually works!!
Date published: 2021-07-21
Rated 1 out of 5 by from Clear coating polished aluminum wheels First time I have been disappointed by an eastwood product. This stuff is far from clear, dulled my wheels horribly!
Date published: 2020-12-30
Rated 1 out of 5 by from Total waste of time & money on bare steel Applied Diamond Clear to just-tumbbled/cleaned steel per product instructions 2 months ago. Steel is now starting to rust. Parts have to be removed again, stripped again, coated again (with something that genuinely works,) then reinstalled. DO NOT use this product on bare steel. Total waste of time & money.
Date published: 2020-08-31
  • y_2022, m_8, d_12, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_2, bvpage2n
  • co_hasreviews, tv_4, tr_16
  • loc_en_US, sid_16105Z-16106Z, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 56.58ms
  • REVIEWS, PRODUCT

Questions & Answers

will it work on nickel plating have no chrome on bumper anymore.

Asked by: coopers classics
Yes, as long as the surface is properly prepped first. It would be best to sand and clean and degrease prior to applying.
Answered by: Kelly H
Date published: 2021-12-07

Would Diamond Clear Satin Aerosol Paint in a can be appropriate cover coat for the Satin Black Aerosol Wheel Paint?    

Asked by: Goluscombe
The Diamond Clear would be great to apply over Satin Black Wheel paint
Answered by: ZachC
Date published: 2021-12-02

Does it have metallic or flakes in the spray can?

Asked by: 42Noshop
This is a clear coat product. It does not contain any flakes.
Answered by: Kelly H
Date published: 2021-11-19

Does it stick to rubber?  i’m looking for a product a high gloss clearcoat weather spray paint or any kind that will stick to rubber ?? 

Asked by: Vicc
This is not designed for rubber.
Answered by: ZachC
Date published: 2021-11-05

I painted my bathroom vanity ceramic tile and now want to seal it. Will this work to protect it?

Asked by: Judyg
Unfortunately, we strictly test for automotive use only.
Answered by: Kelly H
Date published: 2021-09-27

Is this clear coat Isocyanate-free? Thanks.

Asked by: TerryT
This clear is isocyanate free.
Answered by: Kelly H
Date published: 2021-07-30

How many cans I need to spray 4 20 inch aluminium polish rims?

Asked by: Nel01
We recommend using 1 can per 2 wheels. Since 4 20 inch rims are a little bigger than most, we would recommend 5 cans for your application.
Answered by: Sonya
Date published: 2021-05-11

Can this be applied over POR-15 on the chassis?

Asked by: Calvin
This can be applied over the POR15 once it is fully cured.
Answered by: Kelly H
Date published: 2021-08-08

I just finished removing corrosion from 30-blade turbine aluminum wheels and polishing them with Mother's Mag and Aluminum Polish. Is this something that I can apply on top of the mag polish?

Asked by: sean
Once the wheels are cleaned and all residue from the polishing operation are removed you can apply Eastwood's Diamond Clear Gloss(16105Z) or Satin(16106Z) as they are both Direct to metal(DTM) Paints. We recommend cleaning the wheels with Eastwood's Pre Painting Prep(10041Z) before painting to insure the best bond possible.
Answered by: vince
Date published: 2021-01-25

Can dimond clear be used to top coat aluma blast

Asked by: Daniel
Yes, the Diamond clear can be applied on top of our Aluma Blast coating.
Answered by: Kelly H
Date published: 2021-01-10

Will the diamond clear work on Galvanized metal?

Asked by: Pavlo1
The galvanized metal must be scuffed first before using the diamond clear.
Answered by: SeanW
Date published: 2020-09-24

Is this suitable for interior carbon fiber trim pieces?

Asked by: Kcmm
Our Diamond clear can certainly be used over carbon fiber trim pieces. For an even harder clear finish consider our 2k Aerosol clear.
Answered by: Scott C
Date published: 2020-09-16

Will this work on painted wheels with aluminum facia?

Asked by: Jeff2166
This will work for your application.
Answered by: SeanW
Date published: 2020-09-11

Can this be applied to rustoleum hammered primer on a car?

Asked by: Cherry 73 gp
We do not recommend applying any of our products over the top of Rustoleum coatings.
Answered by: Kelly H
Date published: 2021-08-23

I’m getting new shocks and coil springs and I what to protect them from rust and oxidation will this diamond clear work? If not what do you suggest. Thanks 

Asked by: Dave3359
This is a lacquer based clear coating. A much better and more durable option would be our ExoArmour https://www.eastwood.com/exoarmour.html
Answered by: Kelly H
Date published: 2020-06-28

Can I use this product too clear over vinyl decals on motorcycle tank?

Asked by: taysey22471
This is a 1K air dry clear coat. On a motorcycle tank, I'd recommend our 2K AeroSpray Clear as it will be much more durable, especially with any gas drips.
Answered by: NickC
Date published: 2020-08-04

Can I use this over Duplicolor Trunk paint. I had to go that Route because Eastwood is out of the Aqua.

Asked by: Randy1
This should work over top as long as the base coat has fully dried.
Answered by: MattM
Date published: 2020-05-13

Just cleaned my used 35 foot aluminim flag pole.will this product work on this bare metal. It is to much work getting this pole out of the ground. I need long term solution with the elements.

Asked by: meat camo
For something that will be out in the elements like a flag pole we recommend out Exo Amour. Part number 15350z
Answered by: Scott C
Date published: 2020-05-01

Would This Be A Good Product To Use On An Unpainted Steel Bicycle Frame ?

Asked by: Rupert
This would be a perfect product for that.
Answered by: SeanW
Date published: 2020-10-22

What is the typical coverage to expect from one can? I would be using as a top coat over your trunk spatter paint. Restoring the trunk on a 60 Chevy Biscayne so a rather large area. How many cans of each?

Asked by: Mike M
One aerosol can will cover about 10 SQ FT.
Answered by: SeanW
Date published: 2020-04-19

I want to clear over a Corian coffee table after I polish it out. It sits outside a lot. Will this last, not change color, or peel prematurely?

Asked by: BillyD
This product would not last forever, we would recommend reapplying it every 6 months.
Answered by: SeanW
Date published: 2020-04-17

would this be the product to use for sealing/protecting a decal on a chrome air cleaner lid?

Asked by: stumo
Yes, this clear could certainly be utilized for the application in reference.
Answered by: Kelly H
Date published: 2020-04-07

Is this what I want to use if I want a satin finish on a patina/rust car?

Asked by: HeathB
We would recommend using our patina preserver to achieve that look.
Answered by: SeanW
Date published: 2020-07-08

After application of diamond coat clear on a bare metal motorcycle tank, would an application of the 2K clear be recommended for protection from potential fuel spilling?

Asked by: Superfly
The 2k clear can't be applied over the diamond clear, if you are looking for a direct to metal clear to protect from fuel spilling I would recommend using our exo armour.
Answered by: SeanW
Date published: 2020-07-08

Which of your products would be suitable to protect polished brass from corrosion?

Asked by: Ted 52
The best product for protecting the polished brass would be our Exoarmour Item #15350Z https://www.eastwood.com/exoarmour.html
Answered by: Bob G
Date published: 2021-09-19

Would you recommend this for clear coating 65 ford metal dash after painting?

Asked by: 65Ranchero
Yes, this clear coat could certainly be used for the application in reference however our 2K clears would offer much more durability.
Answered by: Kelly H
Date published: 2020-03-08

Is Eastwood Diamond Clear suitable and durable enough for spraying over a bare aluminium motorcycle (dirt bike) swingarm?

Asked by: Markwn
This is a lacquer based (non catalyzed) coating. It will offer some UV stability and protection but a much better option would be our Exo Armour https://www.eastwood.com/exoarmour.html
Answered by: Kelly H
Date published: 2020-02-14

Would you recommend this product to clear coat the refinished bare aluminum master cylinder of a motorcycle?

Asked by: klevay
The Diamond clear would be an ok choice. A much better coating would be our Exoamour 15350Z This would provide an all but permanent solution to your coating of the master cylinder. https://www.eastwood.com/exoarmour.html
Answered by: Bob G
Date published: 2019-12-26

I want to use this product to clear coat a new Edelbrock intake manifold. Would you recommend masking off the gasket mating surfaces or would you just clear coat the whole thing?

Asked by: Mike
We would recommend masking off the gasket mating surfaces for best results.
Answered by: Kelly H
Date published: 2019-12-14

Hi ,We want to seal a sheet of corrugated zink coated galvanized roofing sheet. Need it protected from soft water spray. Meaning sealed from salt ! Will this product protect from rust?

Asked by: Jess
This clear coat would not hold up to well for Marine applications.
Answered by: Kelly H
Date published: 2019-10-23
  • y_2022, m_8, d_12, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_78
  • loc_en_US, sid_16105Z-16106Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 84.6ms
  • QUESTIONS, PRODUCT
Eastwood Diamond Clear DTM and Painted Surfaces Aerosol

Starting at$0.00