The Original Eastwood Powder-Coating Gun brings the benefits of powder coating right to your home garage or shop.
- Coat and cure in under an hour!
- Easy to apply
- Extremely durable finish
- Quick color changes
- 11,000-volt output
This innovative, inexpensive powder-coat gun helps you do a professional-looking powder coating job right at home. All you need to add are a compressed air source (5-10psi) from a portable tank with a regulator or a compressor), a dedicated electric oven or toaster oven, and powder colors.
The Eastwood 3 Gallon, Oil-Less Pancake Compressor, with an Integral Air Regulator, efficiently supplies all compressed air requirements for operating Eastwood Powder Coating Gun systems as well as most airbrushes. The compact, efficient design also works well with some lower demand air tools, tire inflation, blow guns and many other compressed air applications.
About Eastwood DIY Powder Coating Gun and Pancake Compressor
Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated
surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited,
with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer.
Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.
One 8-oz. bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents. HotCoat powder coating requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).
Air Compressor Specifications
Power Requirement: 120V 60Hz, 2.5-amp
Motor Horsepower: 1/3 hp
Tank Size: 3 gallon
Air Delivery: 1.0 SCFM @ 40 PSI, 0.6 SCFM @ 90 PSI
Cut-in Pressure: 85 PSI
Cut-out Pressure: 100 PSI
Max. Pressure: 100 PSI
Noise Decibel Level: 87 db
Power Cord: 6ft, 3-prong grounded, 18 AWG
Use a Disposable Dust Mask when handling or applying powder. Powder,like common flour, suspended in the air in high concentrations can be explosive. To minimize any explosion risk - sweep up, do not vacuum powder from the floor. Cure powder in a well ventilated area. The urethane powders we sell liberate a very minute amount of isocyanates when the powder flows out.This usually occurs about 3-5 minutes after the part is placed in the oven to bake. Wear a respirator when curing or inspecting flow out progress.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov