Item # 54313 BRAND: Eastwood

Eastwood Elite HotCoat 2lb Powder Hopper & Stand

Mini Hopper with Stand gives you the ability to do small jobs and change over colors quick.
Mini Hopper with Stand gives you the ability to do small jobs and change over colors quick.
Eastwood Elite HotCoat 2lb Powder Hopper & Stand is rated 4.3 out of 5 by 3.
  • y_2021, m_10, d_15, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_54313, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 71.09ms
  • REVIEWS, PRODUCT
Reg. $69.99 Sale $64.97 Save $5.02
Loading...
Loading...
Save for Later
Mini Hopper with Stand gives you the ability to do small jobs and change over colors quick.
  • 90-Day Returns
  • Technical Support
  • 3 year Warranty
Eastwood Elite HotCoat 2lb Powder Hopper & Stand

Description

The Eastwood Elite 2 lb. mini hopper makes it convenient to quickly change out colors when performing small job. It can also be used to store your most commonly use powder in-between jobs (note: needs to be stored in a climate controlled environment.)

Specifications

Holds 2 lbs of powder. -Includes a stand to prevent tipping. - All Stainless Steel construction.- For use with any powder coating system that uses 8 mm OD nylon air inlet hose and 11 mm ID air outlet hose.

Warranty

3 Year

Shipping

Ships via Fed-Ex

Instructions

Please read and fully understand the instruction manual before using this tool.

Safety Information

Please wear proper personal protection equipment when using this type of tool

Customer Reviews

Rated 5 out of 5 by from I order 1 for every color definitely a must have and definitely on the pricey side for what it is but it beats having to clean it out every time. Wish it came with the rubber lines for that price. One of the ones I ordered looks like it was rushed put together and welded has a cracked weld and the top isn't round but the rubber gasket seems to keep it from leaking.
Date published: 2020-04-28
Rated 5 out of 5 by from Unprecedented Quality This little thing is a Beast! I’m extremely satisfied with the way the cap is made. The hinges are strong and pull down so much! I’m sure these would take much more PSI. Although a bit expensive I do believe it holds its value. The stand is made from 2 pieces of thick gauge steal and hold your hopper from tipping over while powder coating. The fittings are beautiful! I do believe they are 3D printed? But the quality is impressive. Overall these are worth it, if it came with a fluidizing membrane, and some simple cheap caps to place over the fittings for storage I would say the price is right!
Date published: 2020-02-02
Rated 3 out of 5 by from Solid Product Good product but should offer an option to purchase without the stand. We bought multiple for the shop because the seals in the lids kept separating and causing powder leaks. Couldn't use the containers while waiting for the replacement seals to dry so we were forced to buy more to keep production moving. Good that they have replacement seals but they don't have adhesive on them and their tech support goes back and forth on how to mount/what to use
Date published: 2021-08-25
  • y_2021, m_10, d_15, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_54313, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 25.55ms
  • REVIEWS, PRODUCT

Questions & Answers

will this hopper work with other systems? is it a universal or a specifically made for your products?

Asked by: d14099
We only test our hoppers with our PCS-1000 unit.
Answered by: ZachC
Date published: 2021-09-08

What is the minimum amount of Powder that has be in the hopper in order to function properly? Also, is this hopper compatible with the The PCS-1000?

Asked by: Entity
This 2lb hopper should have around a minimal of 4-8oz in the hopper to ensure a consistent flow of powder. And it is compatible with the PCS-1000
Answered by: ZachC
Date published: 2021-05-19

What is the recommended method to clean the 2lb hoppers when switching between different powders?

Asked by: WB Cycles
You can just attach a blow gun to your compressor lines and blow out the powder quick.
Answered by: Kelly H
Date published: 2020-05-10

This hopper uses gun pressure to fluidize the powder only when the gun trigger is pulled ? The Fluidize air is to be turned all the way down when using the 2lb hopper ?

Asked by: Chris
The fluidizer air pressure is not related to the trigger being pulled and will constantly flow at the set pressure unless turned down. When using the 2lb hopper just turn the gun fluidizer pressure down to 0.
Answered by: ZachC
Date published: 2020-02-01

The 2 lb. Hopper does not come with pumpcan I buy one

Asked by: DUANE
This is a siphon fed hopper and does not require a pump.
Answered by: ZachC
Date published: 2020-01-25

What are the dimensions of the hopper?  Does it come with a pump?

Asked by: Unkl richie
This hopper is 7" H x 5" W and does not come with a pump.
Answered by: ZachC
Date published: 2020-01-19

Are the dimensions below 7” high by 5” wide the width of the hopper itself or the base? If not how wide is the square base? Is the base removable or welded on?  Curious why there was no fluidizing membrane in the 2lb hopper like there is in the 5lb unit?

Asked by: powdERwatER
  • y_2021, m_10, d_15, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_54313, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 59.96ms
  • QUESTIONS, PRODUCT
Eastwood Elite HotCoat 2lb Powder Hopper & Stand
Reg. $69.99 Sale $64.97 Save $5.02
In Stock