- Eastwood Elite QST-30/60 Scroll Air Compressor
Eastwood Elite QST-30/60 Scroll Air Compressor
Eastwood Elite QST-30/60 Scroll Air Compressor
Item #32200 Brand: Eastwood
NEW Eastwood ELITE QST-30/60 Scroll Compressor
The New Eastwood ELITE QST-30/60 Scroll Compressor is more powerful, quieter and efficient. Plus it’s one of the most compact compressors ever that will power all the tools in your shop.
- Innovative - Direct Drive Cast Iron Scroll Pump
- Integrated Air Cooler - Multi-stage oil filtration system
- Low Noise Level - Only 63db
- Compact Size - Performance of a 60 gallon in the size of a 30 gallon
- Powerful - 12.7 cfm @ 90 psi
- Dependability - 100,000 hour pump life, 4 HP continuous duty motor, All steel pressure hard lines and hydraulic style flex lines
The quietest compressor we've EVER tested PLUS it will run every air tool in your shop!
- Only 63 dB at 1 meter - No louder than a typical conversation!
- Comparable in noise to your home A/C unit
- Quieter than your air tools
- 1750 RPM Industrial Scroll Pump produces 12.7 CFM - enough air for small production shop
- Comparable in performance to units costing 3x as much
- Innovative technology maximizes air delivery to your tools
- Direct Drive motor and pump eliminates belt noise, slippage and dust
- CNC machined cast iron pump for extended life and max efficiency
- Pressurized oil lubrication system assures 100,000 hour pump life
Plenty of Air
The 1750 RPM industrial grade scroll pump produces 12.7 cfm and will be able to handle most air tools and paint guns.
Compact and Portable
Completely portable so you can take it to the project you are working on.
HOW DO SCROLL COMPRESSORS WORK? Read more at Air Compressors
WHY ARE SCROLL COMPRESSORS MORE EFFICIENT? Read more at Air Compressors
(1) Eastwood Elite QST-30/60 Scroll Air Compressor
Power Requirement: 220-240V, 60Hz, Single Phase
Full Load Amps: 17
Motor Horsepower: 4 hp
Tank Size: 26.4 gallon [100 liter]
Tank Fill Time: 3 minutes max.
Air Delivery: 12.7 SCFM @ 90 PSI
Cut-in Pressure: 115 PSI [7.9 bar]
Cut-out Pressure: 145 PSI [10 bar]
Max. Pressure: 145 PSI [10 bar]
Pressure Relief Valve Setting: 160 PSI [11 bar]
Motor and Scroll Pump RPM: 1750
Scroll Pump Oil Capacity: 101 ounces [3 liter]
Sound Reading @ 3.2 ft. [1m]: 63 DB
Power Cord: 6ft, 3-conductor grounded, 10 AWG
Always read and fully understand operators manual before using this product. Always consult a certified electrician to install the unit. Always keep hands out of the way of rotating components. Never operate this tool in wet conditions due to electrical shock hazard. Never weld to the tank of a compressor.
Click here to see safety products
Shipping: There is a $250 flat rate shipping fee for shipping in the Contiguous United States.
Liftgate Service: Is highly recommended, or sometimes required, for delivery of this product. If you have a safe method of unloading without a liftgate, you will have the opportunity to remove liftgate service at checkout. Please note that the truck driver will NOT assist in unloading the product for you. We are not responsible for personal injury or damage to the product resulting from unloading the merchandise without the benefit of a liftgate, delivery dock or forklift.
How big is it?
The scroll compressor is 44" wide X 39" tall X 21" deep. It weighs 325 Pounds.
Will the scroll compressor need to be hardwired or will it have a plug?
The scroll compressor will come with a 10 ga cord that will not have a plug end. This will give you the option to hardwire or install an appropriate plug of your choice.
Will a 20 amp breaker be sufficient for power usage?
Refer to the Compressor nameplate for voltage and amperage requirements. All wiring must be done by a licensed electrician, in accordance with National Electric Code and state and local requirements. For best performance, the Compressor must be installed on a dedicated circuit, with a circuit breaker or fuse for protection. Each time the Compressor motor starts, it will momentarily draw several times its full load amperage. It is important to consider this start-up surge when specifying circuit breakers or fuses. If fuses are used, time-delay type must be installed.
Do these type of compressors shut off when the tank is full?
The QST will shut off at 145 psi which is when the tank full.
How Long does it take for the tank to fill to 145psi?
Approximately 3 minutes.
How Much does it cost to ship the Scroll Compressor?
Shipping is a 250 Dollar Flat rate Fee. In store pick up will also be available at our three retail locations.
Does the Scroll Compressor still need an air Filter/Drier?
Just like a piston compressor the scroll compressor compresses air which causes the air temperature to rise and moisture to condense Therefore the same Filtration and moisture separation will be needed to ensure clean dry air.
What is the Warranty?
The Scroll Compressor is backed by a 3 year warranty.
What are the maintenance requirements?
After the first year we specify an oil change and every three years we specify an oil and filter change. There is an air filter, an oil filter and a moisture separator/filter that would be changed at that time.
Where is this Compressor Made?
The air compressor is made in China to Eastwood's specifications. We do all validation and testing of products here in the USA to ensure that they meet our exacting standards.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Questions & Answers