Item # 14760ZP Epoxy White Primer and Catalyst Kit BRAND: Eastwood

Eastwood White Epoxy Primer and Catalyst for Automotive Car Paint - 2 Gallon Kit

Eastwood White DTM Epoxy Primer and Catalyst
Eastwood White DTM Epoxy Primer and Catalyst
Eastwood White Epoxy Primer and Catalyst for Automotive Car Paint - 2 Gallon Kit is rated 4.7 out of 5 by 6.
  • y_2022, m_10, d_5, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_14760ZP_bv32_Epoxy_bv32_White_bv32_Primer_bv32_and_bv32_Catalyst_bv32_Kit, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 85.54ms
  • REVIEWS, PRODUCT
$202.98
Loading...
Save for Later
Eastwood White DTM Epoxy Primer and Catalyst

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

  • • 90 Day Returns
  • • Lifetime Tech Support
Eastwood White Epoxy Primer and Catalyst for Automotive Car Paint - 2 Gallon Kit

Product Overview:

Description

Eastwood DTM (Direct to Metal) Epoxy Primer 1:1 primes and seals with excellent adhesion and corrosion resistance.

  • Can be used as a primer or sealer
  • Excellent adhesion and corrosion resistance
  • Fast Drying & Maintains good color holdout
  • Sand-able - 2-3 days
  • Applied Over Steel, Aluminum, Fiberglass, Body fillers, Existing finishes
  • Made in the USA

Eastwood's Epoxy Primers are user friendly, 2 component primer/sealer that dries fast and maintains good color hold out on steel, aluminum, fiberglass, body fillers and existing finishes. Easy 1:1 mixing with Part B catalyst. Sands easily 2 to 3 days after application. Contains no lead, chromate or isocyanates.

Specifications

MIXING RATIO

After shaking/stirring primer, thoroughly mix one part primer with one part catalyst. No induction time is required with this epoxy system.


SPRAY GUN SETUP

HVLP Gun: Fluid Tip 1.4-1.8 mm Inlet Spray Pressure 25-30 psi
Conventional Gravity: Fluid Tip 1.4-1.6 mm Inlet Spray Pressure 45-55 psi
Conventional Siphon: Fluid Tip: 1.6-1.8 mm Inlet Spray Pressure 45-55 psi


APPLICATION INSTRUCTIONS

Eastwood Epoxy Primer should be applied in medium wet coats, with a 30-minute flash period between each (at 70 °F). Typically, one to two coats is enough to achieve the desired 1 mil. dry film thickness, though more material may be applied as needed. Additional build requires longer flash periods between coats. Epoxy primer may be topcoated after approximately 30 minutes (wait 45-60 minutes after applying more than two coats), or up to about five days. After five days, primer MUST be scuff sanded prior to topcoat application. May be sanded (wet) the day after application. Wait two to three days before sanding dry.

In the Box

Guides & Accessories

Instructions

Click here for product instructions

Safety Information

Always wear eye, respirator and skin protection. Use in a well ventilated area away from open flame. Consult MSDS for specific warnings and precautions

Accessories

Eastwood Urethane Reducers
51604 Concours Primer/Base Paint Gun
12569 Master Gun Cleaning Kit
12846Z Eastwood Aerosol-Injected Cleaner
10041ZP PRE Painting Prep
11456 Bandit Respirator
20473 2 stage air dryer system

Reviews

Rated 5 out of 5 by from Durable layer of protection Great first(base) layer product after body work! Easy to mix and apply.
Date published: 2021-06-20
Rated 5 out of 5 by from User friendly I have had a great result with this product. I'm very please with the ease of application. Its very easy to sand once its cured. Eastwood makes a great product for a good price. Thanks Eastwood.
Date published: 2021-05-31
Rated 3 out of 5 by from Dented cans both cans...................................................... Dented cans both cans ...
Date published: 2022-05-03
  • y_2022, m_10, d_5, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_14760ZP_bv32_Epoxy_bv32_White_bv32_Primer_bv32_and_bv32_Catalyst_bv32_Kit, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 10.19ms
  • REVIEWS, PRODUCT

Questions & Answers

The description states that this can be used as a sealer, what reducer should be used and at what ratio.

Asked by: JB 1961
To use as a sealer this can be mixed with its catalyst at the required 1:1 ratio then reduced by 20% with any of our Urethane reducers.
Answered by: Kelly H
Date published: 2021-11-05

Can I use this product on plywood, i want to use automotive paint after.

Asked by: Vick
We have never tested this product over a wooden surface.
Answered by: ZachC
Date published: 2021-08-31

Is there any way to tint the epoxy? I'd like to add a brown color to it. Thank you

Asked by: ToddF
Unfortunately, no. This can not be tinted or altered with anything other than any of our other Eastwood Epoxy primer options which we have gray, white and black.
Answered by: Kelly H
Date published: 2021-08-23

I'm restoring a fiberglass van hightop. It has some cracks in the old gelcoat so I was thinking of redoing the gelcoat and then painting over it to match the rest of the body. I have Eastwood Epoxy primer, basecoat and 2 clear. Would this all work?

Asked by: sebbo
Yes, this sequence of products would be great for the application in reference.
Answered by: Kelly H
Date published: 2021-08-21

can body filler or polyurethane primer be applied over this primer? If so, what are the instructions?

Asked by: stude
Yes, either would be perfectly fine. It can technically be applied 30-45 minutes after applying the Epoxy up until 5 days. After 5 days the Epoxy will need to be sanded prior to applying anything further as it will have fully cured.
Answered by: Kelly H
Date published: 2021-09-15

Can I use this White Epoxy Primer along side, over or under the Eastwood Gray Epoxy Primer (W Epoxy Primer Gray Quart 1:1 50242ZP)? Is is totally compatible?

Asked by: brando
Yes these two are completely compatible and this should cause no issues.
Answered by: Kelly H
Date published: 2021-08-12

Can Eastwood Epoxy primer be top coated with a quality lacquer primer/surfacer and then painted with nitrocellulose lacquer? Thanks

Asked by: Arcieri
We can not guarantee compatibility with anything we do not sell- but a reaction would most likely occur between the products referenced.
Answered by: Kelly H
Date published: 2021-07-25

I will be using epoxy first and urethane primer second. If I put two coats of epoxy down. How long after the last coat of epoxy can I start spraying urethane. And do I always have to sand in between each coat. Or can I just spray right away if everything.

Asked by: Christopher
You can apply the Urethane over the last coat of Epoxy as soon as 30-45 minutes after applying. This can be applied right over (without sanding) up until 5 days after applying this last coat. Anytime after- you will have to abrade the surface prior to top coating since the Epoxy is fully cured at this point.
Answered by: Kelly H
Date published: 2021-08-11
  • y_2022, m_10, d_5, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_14760ZP_bv32_Epoxy_bv32_White_bv32_Primer_bv32_and_bv32_Catalyst_bv32_Kit, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 157.43ms
  • QUESTIONS, PRODUCT
Eastwood White Epoxy Primer and Catalyst for Automotive Car Paint - 2 Gallon Kit
$202.98
In Stock