Item # 31158-31560

Eastwood Fender Roller and Heat Gun

Eastwood Fender Roller and Rockwood Heat Gun
Eastwood Fender Roller and Rockwood Heat Gun
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 14.78ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$107.96
Out Of Stock. Due back October 20
Save for Later
Eastwood Fender Roller and Rockwood Heat Gun
  • 90-Day Returns
  • Technical Support
Eastwood Fender Roller and Heat Gun

Description

The Eastwood Fender Roller

Eastwood's Fender Roller won't let your fender ruin expensive tires on lowered vehicles!

  • Professional grade high quality tool for years of service
  • Durable powder coated finish
  • Delrin® ball-bearing fender-former wheel
  • Fender former eliminates tire rub by increasing tire-to-fender clearance
  • Adjustable fender-rolling roller gradually rolls the inner lip flat
  • Perfect for lowered vehicles and vehicles with larger wheels
  • Adjustable-height arm lets you work on a wide range of automotive and light truck applications

Professional-grade fender roller tool helps you easily increase the clearance between your tire and the fender, roll the fenders, or repair wheel-arch collision damage.

Our exclusive fender rolling tool bolts directly onto the wheel's hub flange, and the elongated holes in the adapter plate fit all popular 4- and 5-bolt hubs. It's held in place with the included dished washers and your vehicle's lug nuts. Accommodates up to a 120.6 mm (4.75") 4- or 5-lug bolt circles. Forming arm adjustability ranges from a minimum of 14" to a maximum of 22-3/4" hub-center-to-edge-of-roller to handle most automotive and light truck projects. Non-returnable. Limited one-year warranty: if defective, we'll replace the tool.

The Rockwood Heat Gun

The Rockwood 1500 Watt Heat Gun offers a convenient 3-position switch featuring OFF, 572°F [300°C] and 1022°F [550°C] with matched Low & Hi fan settings.

  • Powerful 1500W Output
  • Dual Heat Settings 572 to 1022 Degrees F
  • Durable ABS Body
  • 6' Power Cord

Perfect for many automotive & hobby projects where fast, fan-forced, concentrated heat is required.

Customer Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 12.62ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

Questions & Answers

Will this work on a 79 Chevy Malibu

Asked by: DoubleK
The Fender Roller by itself Accommodates up to a 120.6 mm (4.75") 4- or 5-lug bolt circles. For trucks and cars with larger (5" to 6") 5 & 6 lug bolt patterns and up to a 4.25" center hub you would need to purchase the 25271 Adapter also. You must also make sure that it is only a single lip and not double for it to work properly.
Answered by: Kelly H
Date published: 2021-07-16

Hi, will it work on a 2005 dodge magnum? Thanks kindly...

Asked by: Anonymous
Yes this tool will fit your vehicle. Follow all directions for a proper job. Warm the paint and progress slowly..
Answered by: vince
Date published: 2021-03-03

Will this work on my 1965 falcon ranchero quarter panel?

Asked by: Dave
Unfortunately this Fender Roller (31158) is not recommended to roll the quarter panel on a 1965 Ranchero.
Answered by: vince
Date published: 2020-12-06

Will this fender roller with heat gun work on my 91 Ford Mustang gt-4lug on rear fenders?

Asked by: Buckey
We can not recommend using this for any double walled rear rolling applications.
Answered by: Kelly H
Date published: 2020-10-09

Will this work on 94 chevy 1500

Asked by: Mayel
Yes, this should work but you will need the "Truck adapter" in addition to this tool https://www.eastwood.com/fender-roller-adapter.html
Answered by: Kelly H
Date published: 2020-05-02

will this work on a 2000 honda civic ex coupe fwd 4 lugnut

Asked by: Louie
We can not go by any specific make or model. Here are the specs as listed: Accommodates up to a 120.6 mm (4.75") 4- or 5-lug bolt circles.. We also have a truck adapter: https://www.eastwood.com/fender-roller-adapter.html which can be used on trucks and cars with larger (5" to 6") 5 & 6 lug bolt patterns and up to a 4.25" center hub.
Answered by: Kelly H
Date published: 2019-08-05

will this work on a Mazda miata - 2004

Asked by: angel
As stated this tool accommodates up to a 120.6 mm (4.75") 4- or 5-lug bolt circles. Forming arm adjustability ranges from a minimum of 14" to a maximum of 22-3/4" hub-center-to-edge-of-roller.
Answered by: Kelly H
Date published: 2019-03-05

I see it’s not recommended for a 1987 Grand National, will it work for a 1987 Ford Mustang- 4 lug. 

Asked by: RT87GT
This tool accommodates up to a 120.6 mm (4.75") 4- or 5-lug bolt circles.
Answered by: Kelly H
Date published: 2020-10-05
  • y_2021, m_9, d_20, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_31158-31560, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 36.36ms
  • QUESTIONS, PRODUCT
Eastwood Fender Roller and Heat Gun
$107.96