Eastwood Gray Epoxy Primer and Catalyst Gallons

Item #51127 Gray Epoxy Primer

Eastwood Gray Epoxy Primer and Catalyst Gallons
Maintains good color hold-out on steel, aluminum, fiberglass, body fillers
* Both Primer and Catalyst are required for a 1:1 mix

Eastwood Epoxy Primer Gray Gallon 1:1

Item #50244ZP

Special Price $64.97

Regular Price: $75.99

Save: $11.02

- +
Quantity:
Quantity: close

BACKORDER

Eastwood Epoxy Primer Catalyst Gallon 1:1

Item #50245ZP

Special Price $41.97

Regular Price: $45.99

Save: $4.02

- +
Quantity:
Quantity: close

In stock

Total $0
OR

Details

Eastwood Gray DTM (Direct To Metal) Epoxy Primer 1:1 primes and seals with excellent adhesion and corrosion resistance.

  • Can be used as a primer or sealer
  • Excellent adhesion and corrosion resistance
  • Fast Drying & Maintains good color holdout
  • Sand-able - 2-3 days
  • Applied Over Steel, Aluminum, Fiberglass, Body fillers, Existing finishes
  • Approximate Coverage Per Gallon: 140 SQ FT
  • Maximum operating temperature: 150 Fahrenheit
  • Made in the USA

Eastwood's Gray automotive epoxy primers are user-friendly, 2-component primer/sealer that dries fast and maintains good color hold-out on steel, aluminum, fiberglass, body fillers and existing finishes.

Specifications

MIXING RATIO

After shaking/stirring primer, thoroughly mix one part primer with one part catalyst. No induction time is required with this epoxy system.

SPRAY GUN SETUP
HVLP Gun Fluid Tip 1.4-1.8 mm Inlet Spray Pressure 25-30 psi
Conventional Gravity Fluid Tip 1.4-1.6 mm Inlet Spray Pressure 45-55 psi
Conventional Siphon Fluid Tip: 1.6-1.8 mm Inlet Spray Pressure 45-55 psi
APPLICATION INSTRUCTIONS

Eastwood Epoxy Primer should be applied in medium wet coats, with a 30-minute flash period between each (at 70 °F). Typically, one to two coats is enough to achieve the desired 1 mil. dry film thickness, though more material may be applied as needed. Additional build requires longer flash periods between coats. Epoxy primer may be topcoated after approximately 30 minutes (wait 45-60 minutes after applying more than two coats), or up to about five days. After five days, primer MUST be scuff sanded prior to topcoat application. May be sanded (wet) the day after application. Wait two to three days before sanding dry.


Safety

Always wear eye, respirator and skin protection use in a well ventilated are consult MSDS for specific warnings precautions.


Eastwood Offers Free Lifetime Technical Support


Click here for product SDS information


Attention California Residents - Proposition 65


Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov


   

Customer Reviews

Questions & Answers