Eastwood MIG Welder 135 And Versa Cut Plasma Cutter 40

About Eastwood MIG Welder 135 And Versa Cut Plasma Cutter 40

MIG 135 welder is designed for the home hobbyist and light fabricator. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 3/16" mild steel and stainless. Welder has a 20% duty cycle at 90 amps, and 25-135-amp welding range. Feeds wire at 39"-468" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, wire, tips and accessories...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration. Backed by Eastwood's no-hassle return policy and a 3-year manufacturer's warranty.
Plasma Cutter
This innovative, affordable, plasma cutter was designed and developed by Eastwood's own R&D staff, and tested in-house on the same type of real-life projects you'll use it for. It doesn't matter where you need to work, because this plasma cutter's voltage-sensing technology lets you use either a 110v or 220v outlet with our adapter cord. Works with any standard home- or shop-type air compressor within a range of 20-65 psi; internal moisture separator ensures dry air is delivered to the torch. Rated 140 volts at 40 amps. Duty cycle: 60% at 40 amps. Weighs less than 30 lbs., for easier portability.

What is "Plasma Cutting"? Plasma cutting utilizes a high-velocity jet of ionized gas (plasma) that conducts electricity from the torch of the plasma cutter to your metal workpiece. That directed plasma stream (about 30,000 degrees F) heats the workpiece, converting the metal to molten slag. That high-velocity stream literally blows the molten metal away, leaving a clean, precise cut.

Contents

MIG 135 Welder (57 lbs.)
0.023" Steel MIG Wire
Extra 0.023" Contact Tip
Gas Regulator with hose
Tweco-Style Gun and Consumables
Switchable Drive Roller
8' Ground Cable and Gun Cable
Wire Brush
Welding Face Shield
Plasma Cutter
Includes: Versa Cut unit, torch assembly, ground clamp assembly, 110/220V adapter cord.

Replacement Parts

MIG 135
12211-Contact Tip 0.023
12224-Contact Tip 0.030
12226-MIG Wire 0.023
12227-MIG Wire 0.030
12225-Flux Wire 0.030
12239-Drive Roller
12238-Gas Regulator
12210-Tweco-Style Nozzle
Plasma Cutter
12814 Versa-Cut Nozzles, 10 pcs.
12812 Versa-Cut Electrodes, 10 pcs.
Consumable parts can be purchased through Eastwood or are available at most local welding supply stores. If buying locally ask for the following:
Nozzle: Brand – Hypertherm, Part Number – 020115
Electrode: Brand – Hypertherm, Part Number – 020167

Instructions

MIG 135

Click here for product instructions

Welding steel, stainless metals: this unit welds 20- and 18-gauge body panels beautifully. The amperage and output voltage can be controlled precisely to get the proper penetration required. The wire speed can be infinitely adjusted also to gain proper wire fill in the weld pool. This unit has been compared to the leading U.S.-manufactured red welders with equal results at a fraction of the cost. The drive roll mechanism, the heart of any MIG welder, is designed to our specifications and delivers flawless wire feed without skipping or slipping on the wire.
Plasma Cutter

Click here for instructions

Safety

Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants.

Customer Reviews

Questions & Answers