Hotcoat Powder Coat Neon Green

Item #16054 Neon Green

Hotcoat Powder Coat Neon Green
Make a bold statement with this high gloss Neon Green powder.

Neon Green 8 Oz.

Item #16054

$13.99
- +
Quantity:
Quantity: close

In stock

Neon Green 1 Lb.

Item #16054LB

$17.99
- +
Quantity:
Quantity: close

In stock

Total $0
OR

Details

Create a vivid high gloss finish that always draws attention with Eastwood Neon Green Powder Coat. The intense color is shockingly bright for those who like to have a little fun with their custom hot rods and project cars. You can apply this HotCoat lime green powder coat alone as a single-stage finish or as a base for any of our translucent candy powders for a one-of-a-kind finish! If you just want to add a subtle pop of color, use this powder to coat springs, valve covers, wheels, floor pans and other parts.

Our HotCoat fluorescent green powder coat is the best-looking, most durable way to give metal a stunning finish. These powders have impressive resistance to chips, scratches, heat, chemicals and fading. To help them stick to your parts, check out this article about hot flocking and how it helps with powder adhesion. Eastwood has 8-ounce bottles and 1-pound bags of neon green polyester TGIC powder coat that come with our free lifetime technical support.

  • Cure Time: 20 Minutes @ 400°F (actual surface temperature)
  • 100% Virgin Powder
  • Gloss Level: High - 80% to 90% at 60 Degrees
  • Powder Type: Polyester TGIC
  • Storage: <80°F, well ventilated, <60% humidity
  • Durable enough for under hood applications and heat resistant up to 250 degrees F

Apply alone as a single stage, or as a base for any one of our translucent candy powders for a one-of-a-kind finish!




About Hotcoat Powder Coat Neon Green


Finish: High Gloss
Gloss Level: 80 to 90 at 60 Degrees
Powder Type: Polyester TGIC
Cure Time: 20 Minutes at 400 Degrees Fahrenheit (Actual Substrate Temperature)
Coverage: 1 pound of powder = approximately 20 square feet


Contents

8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags


Safety


When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.


Warranty


1 Year


Application


Apply using Eastwood DIY HotCoat Gun 10198 or the Eastwood Dual Voltage HotCoat Gun 11676.


Eastwood Offers Free Lifetime Technical Support


Click here for product SDS information


Attention California Residents - Proposition 65


Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov


   

Customer Reviews

Questions & Answers

You may also be interested in the following product(s)