
Details
Create a vivid high gloss finish that always draws attention with Eastwood Neon Green Powder Coat. The intense color is shockingly bright for those who like to have a little fun with their custom hot rods and project cars. You can apply this HotCoat lime green powder coat alone as a single-stage finish or as a base for any of our translucent candy powders for a one-of-a-kind finish! If you just want to add a subtle pop of color, use this powder to coat springs, valve covers, wheels, floor pans and other parts.
Our HotCoat fluorescent green powder coat is the best-looking, most durable way to give metal a stunning finish. These powders have impressive resistance to chips, scratches, heat, chemicals and fading. To help them stick to your parts, check out this article about hot flocking and how it helps with powder adhesion. Eastwood has 8-ounce bottles and 1-pound bags of neon green polyester TGIC powder coat that come with our free lifetime technical support.
- Cure Time: 20 Minutes @ 400°F (actual surface temperature)
- 100% Virgin Powder
- Gloss Level: High - 80% to 90% at 60 Degrees
- Powder Type: Polyester TGIC
- Storage: <80°F, well ventilated, <60% humidity
- Durable enough for under hood applications and heat resistant up to 250 degrees F
Apply alone as a single stage, or as a base for any one of our translucent candy powders for a one-of-a-kind finish!


About Hotcoat Powder Coat Neon Green
Finish: High Gloss
Gloss Level: 80 to 90 at 60 Degrees
Powder Type: Polyester TGIC
Cure Time: 20 Minutes at 400 Degrees Fahrenheit (Actual Substrate Temperature)
Coverage: 1 pound of powder = approximately 20 square feet
Contents
8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags
Safety
When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.
Warranty
1 Year
Application
Apply using Eastwood DIY HotCoat Gun 10198 or the Eastwood Dual Voltage HotCoat Gun 11676.
Eastwood Offers Free Lifetime Technical Support
Click here for product SDS information
Attention California Residents - Proposition 65

Customer Reviews
Questions & Answers
You may also be interested in the following product(s)
-
Hotcoat Powder Coat Atomic Red
Starting at: $17.99
-
Hotcoat Powder Coat Atomic Orange Powder
Starting at: $15.99
-
Hotcoat Powder Coat Sea Foam Green
Starting at: $9.99
-
Hotcoat Powder Coat Rally Blue
Starting at: $13.99
-
Hotcoat Powder Coat Translucent Teal
Starting at: $14.99
-
Hotcoat Powder Coat Atomic Pink
Starting at: $18.99