Create a high gloss neon finish with Eastwood Neon Green powder coat!
- Cure Time: 20 Minutes @ 400°F (actual surface temperature)
- 100% Virgin Powder
- Gloss Level: High - 80% to 90% at 60 Degrees
- Powder Type: Polyester TGIC
- Storage: <80°F, well ventilated, <60% humidity
- Durable enough for under hood applications and heat resistant up to 250 degrees F
Apply alone as a single stage, or as a base for any one of our translucent candy powders for a one-of-a-kind finish!
About Hotcoat Powder Coat Neon Green
Finish: High Gloss
Gloss Level: 80 to 90 at 60 Degrees
Powder Type: Polyester TGIC
Cure Time: 20 Minutes at 400 Degrees Fahrenheit (Actual Substrate Temperature)
Coverage: 1 pound of powder = approximately 20 square feet
8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags
When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.
Apply using Eastwood DIY HotCoat Gun 10198 or the Eastwood Dual Voltage HotCoat Gun 11676.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Questions & Answers
You may also be interested in the following product(s)
Starting at: $14.97
Starting at: $14.99
Starting at: $9.99
Starting at: $12.99
Starting at: $13.99
Starting at: $17.99